KWL-701UG

KWL-701Ux SERIES Light Bar Graph Array Display DESCRIPTION: The KWL-701Ux series is 11.00mm x 34.50mm seven-element bar graph display. The device has separete anode and cathode for each light segment and is available in 6 different colors. PACKAGE DIMENSIONS PIN 1 A B C D E F G 4.50*6=27.0(1.06) 3.0(0.118) 32.50(1.28) 34.50(1.36) ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. o 7.0(0.276) 9.0(0.354) 11.0(0.433) φ0.50(0.02) 7.62(0.3) 6.30 8.0 2.54*6=15.24(0.6) INTERNAL CIRCUIT DIAGRAM 14 13 12 11 10 9 8 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA A 1 B 2 C 3 D 4 E 5 F 6 G 7 PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. Raw Material GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Emitted Color Bright Red Hi-Eff. Red Super Red Green Super Green Yellow No Common Polar C.C or C.A Wave Length λρ (nm) 700 635 660 565 570 585 Absolute Maximum Ratings ∆λ Pd If Electro-optical Characteristic o If If Vf (V) Iv (µcd) (Peak) (Rec) Per Chip Per Chip (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 90 45 20 30 30 30 100 100 100 100 100 100 50 50 50 50 50 50 100 100 100 100 100 100 1.7 1.7 1.5 1.7 1.7 1.7 2.4 1.9 1.9 2.2 2.2 1.9 2.8 10-20 300 2.6 10-20 700 550 1800 KWL-701U5 KWL-701U3 KWL-701US KWL-701U2 KWL-701UG KWL-701U6 2.6 10-20 1500 5000 2.6 10-20 700 2.6 10-20 850 2.6 10-20 600 1600 1900 1500 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).