Illumination
LUXEON 3535L
Color Line
Color LEDs that deliver the perfect amount
of color you need. No More. No less.
The LUXEON 3535L Color Line enables a new era of color lighting. This
robust color line provides high performance and is targeted at cost
effective designs. Complemented by a broad range of white offerings, the
LUXEON 3535L Color Line enables RGBW applications. This product line
extends the comprehensive LUXEON Color Family.
Features and Benefits
Primary Applications
Industry standard package enables drop-in replacement for
existing 3535 packages
Architectural
Single die and single source architecture for optical control
Entertainment
Common focal length with LUXEON Rebel and LUXEON Z Color LEDs
Lamps
Full color palette for a wider spectrum range
–– Color Tunable Illumination
Specialty Lighting
–– Emergency Vehicle
–– Signage
DS146 LUXEON 3535L Color Line Product Datasheet ©2022 Lumileds Holding B.V. All rights reserved.
No. E507562
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Dominant Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 3535L Color Line LEDs are tested and binned with a 20ms monopulse of 100mA at a junction temperature, Tj, of 25ºC.
Part Number Nomenclature
Part numbers for LUXEON 3535L Color Line follow the convention below:
L 1 3 5 – A A A A 0 B 3 5 0 0 0 0 C
Where:
A A A A – designates color (R625=Red, O615=Red Orange, A589=PC Amber, L567=Lime, G525=Green, B475=Blue,
U450=Royal Blue)
B
– designates polarity (R=reverse polarity)
C
– designates a Lumileds internal code (either 0 or 1)
Therefore, the following part number is used for a Red LUXEON 3535L with reverse polarity:
L 1 3 5 – R 6 2 5 0 R 3 5 0 0 0 0 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3535L
Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON 3535L Color Line at 100mA, Tj=25ºC.
Color
Red
DOMINANT or
PEAK WAVELENGTH [1] (nm)
Luminous Flux [2] (lm) or
Radiometric Power [3] (mW)
Part
Number
MINIMUM
MAXIMUM
MINIMUM
TYPICAL
620
630
10.0
13.5
L135-R625003500000
620
630
10.0
15.0
L135-R6250R3500000
610
620
13.0
15.5
L135-O615003500000
610
620
13.0
20.0
L135-O6150R3500000
PC Amber
–
–
24.0
41.5
L135-A589003500000
Lime
–
–
44.0
64.0
L135-L567003500000
Green
520
540
21.0
36.5
L135-G525003500000
Blue
469
480
8.2
12.5
L135-B475003500000
Royal Blue
440
455
130
160
L135-U450003500000
Red-Orange
Notes for Table 1:
1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements. PC Amber and Lime are binned by chromaticity coordinates. Royal Blue is binned by peak wavelength.
All other colors are binned by dominant wavelength.
2. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.
3. Royal Blue is binned by radiometric power. All other colors are binned by luminous flux.
Optical Characteristics
Table 2. Optical characteristics for LUXEON 3535L Color Line at 100mA, Tj=25ºC.
Color
Red
Red-Orange
Part Number
TYPICAL SPECTRAL
HALF-WIDTH [1]
(nm)
TYPICAL TEMPERATURE
COEFFICIENT OF DOMINANT
WAVELENGTH (nm/°C)
Typical Total
Included Angle [2]
Typical
Viewing Angle [3]
L135-R625003500000
20
0.04
140°
115°
L135-R6250R3500000
20
0.07
140°
115°
L135-O615003500000
20
0.07
140°
115°
L135-O6150R3500000
20
0.07
140°
115°
PC Amber
L135-A589003500000
95
0.01
140°
115°
Lime
L135-L567003500000
110
0.01
140°
115°
Green
L135-G525003500000
35
0.04
140°
115°
Blue
L135-B475003500000
25
0.04
140°
115°
Royal Blue
L135-U450003500000
25
0.04
140°
115°
Notes for Table 2:
1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
3
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON 3535L Color Line at 100mA, Tj=25ºC.
Color
Red
Red-Orange
Forward Voltage [1] (V)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
L135-R625003500000
1.75
2.10
2.50
-2.0
Part Number
Typical Thermal
Resistance — Junction
to Solder Pad (°C/W)
20
L135-R6250R3500000
1.75
2.00
2.50
-1.7
8
L135-O615003500000
1.75
2.10
2.50
-1.7
20
L135-O6150R3500000
1.75
2.10
2.50
-1.7
13
PC Amber
L135-A589003500000
2.80
3.05
3.50
-1.7
25
Lime
L135-L567003500000
2.80
3.05
3.50
-1.7
25
Green
L135-G525003500000
2.50
3.20
3.50
-3.0
42
Blue
L135-B475003500000
2.50
3.00
3.50
-2.5
35
Royal Blue
L135-U450003500000
2.50
3.05
3.50
-2.5
35
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON 3535L Color Line.
Parameter
RED AND
RED-ORANGE
PC AMBER
AND LIME
GREEN
BLUE and
ROYAL BLUE
DC Forward Current [1,2]
125mA
200mA
200mA
200mA
Peak Pulsed Forward Current [1,3]
300mA
240mA
300mA
480mA
LED Junction Temperature
125°C
125°C
115°C
125°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 2
Class 2
Class 2
Class 2
Operating Case Temperature [1]
105°C
105°C
95°C
95°C
LED Storage Temperature
-40°C to 105°C
-40°C to 105°C
-40°C to 95°C
-40°C to 95°C
[1]
(DC & Pulse)
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. At 10% duty cycle with pulse width of 10ms.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1. Typical normalized power vs. wavelength for LUXEON 3535L Color Line at 100mA, Tj=25°C.
Light Output Characteristics
Figure 2a. Typical normalized light output vs. junction temperature for LUXEON 3535L Red, Red-Orange,
PC Amber, Lime, Blue, Green at 100mA.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
5
Figure 2b. Typical normalized light output vs. junction temperature
for LUXEON 3535L Red and Red-Orange reversed polarity at 100mA.
Figure 2c. Typical normalized radiant power vs. junction temperature for LUXEON 3535L Royal Blue at 100mA.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
6
Figure 3a. Typical normalized light output vs. forward current for LUXEON 3535L PC Amber, Lime and Blue at Tj=25°C.
Figure 3b. Typical normalized light output vs. forward current for LUXEON 3535L Red, Red-Orange, Green at Tj=25°C.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
7
Figure 3c. Typical normalized light output vs. forward current for LUXEON 3535L Red and Red-Orange reversed polarity at Tj=25°C.
Figure 3d. Typical normalized radiant power vs. forward current for LUXEON 3535L Royal Blue at Tj=25°C.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
8
Forward Current Characteristics
Figure 4a. Typical forward current vs. forward voltage for LUXEON 3535L Color Line at Tj=25°C.
Figure 4b. Typical forward current vs. forward voltage for LUXEON 3535L Red and Red-Orange reversed polarity at Tj=25°C.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
9
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for LUXEON 3535L Color Line at 100mA, Tj=25°C.
Figure 6. Typical polar radiation pattern for LUXEON 3535L Color Line at 100mA, Tj=25°C.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
10
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON 3535L Red, Red-Orange, Green, Blue and Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the
format below:
A B C
Where:
A
–
designates luminous flux bin (example: L=32.0 to 36.0 lumens, R=48.0 to 52.0 lumens)
B
–
designates radiometric bin (example: B, C, D, E, F, G, H) or dominant/peak wavelength bin (example: 1, 2, 3, 4, 5)
C
–
designates forward voltage bin (example: C=2.00 to 2.25V, G=3.00 to 3.25V)
Therefore, a Red-Orange LUXEON 3535L LED with a lumen range of 15.0 to 17.0, dominant wavelength range of 610 to 620nm
and a forward voltage range of 2.00 to 2.25V has the following CAT code:
E 2 C
LUXEON 3535L PC Amber and Lime LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:
A B C D
Where:
A
–
designates luminous flux bin (example: L=32.0 to 36.0 lumens, R=48.0 to 52.0 lumens)
B C –
designates color bin (example: A0, L0 or L1)
D
designates forward voltage bin (example: W=3.00 to 3.10V, Z=3.30 to 3.50V)
–
Therefore, a Lime LUXEON 3535L LED with a lumen range of 32.0 to 36.0, color bin of L0 and a forward voltage range of 3.00 to
3.10V has the following CAT code:
L L 0 W
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
11
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON 3535L Color Line emitters. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON 3535L Color Line, at Tj=25°C.
Luminous Flux [1] (lm)
Bin
A
Minimum
Maximum
8.2
10.0
B
10.0
11.5
C
11.5
13.0
D
13.0
15.0
E
15.0
17.0
F
17.0
19.0
G
19.0
21.0
H
21.0
24.0
J
24.0
28.0
K
28.0
32.0
L
32.0
36.0
M
36.0
40.0
P
40.0
44.0
Q
44.0
48.0
R
48.0
52.0
S
52.0
56.0
T
56.0
60.0
V
60.0
65.0
W
65.0
70.0
Notes for Table 5:
1. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.
Radiometric Power Bins
Table 6. Radiometric power bin definitions for LUXEON 3535L Color Line.
Bin
Radiometric Power [1] (mW)
Minimum
Maximum
B
130
140
C
140
150
D
150
160
E
160
170
F
170
180
G
180
190
H
190
200
Notes for Table 6:
1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
12
Dominant Wavelength Bins
Table 7. Dominant wavelength bin definitions for LUXEON 3535L Red, Red-Orange, Green and Blue.
Color
Red
Red-Orange
Part Number
L135-R625003500000
L135-R6250R3500000
L135-O615003500000
L135-O6150R3500000
Green
Blue
L135-G525003500000
L135-B475003500000
Bin
DOMINANT WAVELENGTH [1] (nm)
Minimum
Maximum
4
620
630
2
610
620
1
520
525
2
525
530
3
530
535
4
535
540
3
469
475
4
475
480
Notes for Table 7:
1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements.
Peak Wavelength Bins
Table 8. Peak wavelength bin definitions for LUXEON 3535L Royal Blue.
Color
Royal Blue
PART NUMBER
L135-U450003500000
Bin
Peak Wavelength [1] (nm)
Minimum
Maximum
3
440
445
4
445
450
5
450
455
Notes for Table 8:
1. Lumileds maintains a tolerance of ±0.5nm on peak wavelength measurements.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
13
Color Bin Definitions
0.45
0.6
0.445
Bin L1
Bin
A0
0.44
0.58
Bin L0
0.435
0.56
0.425
CIE 1931 y
CIE
1931
y
0.43
0.42
0.415
0.54
0.52
0.41
0.5
0.405
0.4
0.54
0.55
0.56
0.57
0.58
0.48
0.59
0.35
0.37
0.39
CIE
1931
x
0.41
0.43
0.45
0.47
CIE 1931 x
Figure 7. Color Bin Structure for
LUXEON 3535L PC Amber for Table 9.
Figure 8. Color Bin Structure for
LUXEON 3535L Lime for Table 9.
Table 9. Color bin definitions for LUXEON 3535L PC Amber and Lime.
Color
PC Amber
Part Number
L135-A589003500000
BIN
A0
L0
Lime
L135-L567003500000
L1
x
y
0.5622
0.4372
0.5843
0.4152
0.5705
0.4111
0.5499
0.4249
0.3927
0.5007
0.4287
0.5697
0.4327
0.5655
0.3972
0.4986
0.3773
0.5076
0.3927
0.5007
0.4287
0.5697
0.4150
0.5833
Notes for Table 9:
1. Lumileds maintains a tolerance of ±0.01 on x and y coordinates in the CIE 1931 color space.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
14
Forward Voltage Bins
Table 10a. Forward voltage bin definitions for LUXEON 3535L Red, Red-Orange, Green, Blue and Royal Blue.
Forward Voltage [1] (Vf)
Bin
Minimum
Maximum
A
1.50
1.75
B
1.75
2.00
C
2.00
2.25
D
2.25
2.50
E
2.50
2.75
F
2.75
3.00
G
3.00
3.25
H
3.25
3.50
Table 10b. Forward voltage bin definitions for LUXEON 3535L PC Amber and Lime.
Forward Voltage [1] (Vf)
Bin
Minimum
Maximum
T
2.80
2.90
V
2.90
3.00
W
3.00
3.10
X
3.10
3.20
Y
3.20
3.30
Z
3.30
3.50
Notes for Tables 10a and 10b:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
Mechanical Dimensions
X
Y
:X
Part number
L135-R625003500000
L135-O615003500000
L135-A589003500000
L135-L567003500000
L135-G525003500000
L135-B475003500000
L135-U450003500000
L135-R6250R3500000
L135-O6150R3500000
X
Y
Cathode
Anode
Anode
Cathode
Figure 9. Mechanical dimensions for LUXEON 3535L Color Line.
Notes for Figure 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Tolerance of ±0.1mm.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
15
Reflow Soldering Guidelines
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 11.
Table 11. Reflow profile characteristics for LUXEON 3535L Color Line.
PROFILE FEATURE
Lead-Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 12. Moisture sensitivity levels for LUXEON 3535L Color Line.
level
2
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
1 Year
≤30°C / 60% RH
168 Hours +5 / -0
≤85°C / 60% RH
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
16
Solder Pad Design
2.60
2.40
0.82
1.02
Solder mask
0.25
0.65
0.30
Stencil
Top copper
Package geometric center
1.93
1.80
2.13
0.50
0.50
Figure 11. Recommended PCB solder pad layout for LUXEON 3535L Color Line.
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Packaging Information
Pocket Tape Dimensions
Figure 12. Pocket Tape dimensions for LUXEON 3535L Color Line.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Empty components pockets sealed with top cover tape.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
17
Reel Dimensions
Figure 13. Reel dimensions for LUXEON 3535L Color Line.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Empty component pockets sealed with top cover tape.
4. 329 mm reel — 5000 pieces per reel.
5. Minimum packing quantity is 5000 pieces.
6. The maximum number of consecutive missing LEDs is two.
7. In accordance with EIA-481-1-B specification.
DS146 LUXEON 3535L Color Line Product Datasheet 20220630 ©2022 Lumileds Holding B.V. All rights reserved.
18
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world better, safer, more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2022 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS146 LUXEON 3535L Color Line
Product Datasheet 20220630
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
工商网监
湘ICP备2023018690号
