L U M IN I S
1 2
Wall mount
Specification
ARGON
AR10W . AR10W-UP . AR10WL
All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Pulse rated medium base porcelain socket. - 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 1 - 11 ga. galvanized pressure mounting plate. 2 - Cast aluminum isolated ballast compartment. 3 - Solid aluminum top cone 4 - Tempered clear glass for reflected light glow. 5 - Standard semi-specular type V distribution reflector. 6 - Cone shaped heavy duty aluminum housing. 7 - Cast aluminum sealed hinged glass lens frame, with perimeter memory retention embedded silicone gasket . 8 - Stainless steel recessed captive hexagonal cap screws. 9 - Tempered clear glass lens. AR10W: AR10WL: AR10W-UP: Regressed clear tempered glass lens. White translucent acrylic frosted conical dropped lens. Down light only. (Up light model with additional flush mount protection clear lens) Low brightness full cut-off 20”ø aluminum shade. Compatible with AR10W-AR10WL
3 4 5 6 7
8 9
Hinged frame For pole mounting, please refer to page 22
11 1/2” 7 1/2” 17 1/2” 19 1/2” AR10WL Argon with conical lens 13 1/2” 21” ASH: Optional 20”ø shade. Adaptable to AR10W & AR10WL AR10W-UP Max: 100W 13 1/2”
ASH:
5 1/8” AR10W Argon with flat lens
Photometry
Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com.
3 1/2”
90
Certification
UL. Wet Location.
Mounting & E.P.A.
Max.weight: 22 lbs. EPA: 0.65 Installation: Mounts over a standard 4” octagonal electrical box with 3 1/2” c/c mounting holes. (by others ) additional separate mounting holes are provided with wall plate.
60 30
For options details and specifications, please refer to pages 22 - 41
Model#
Light source selection
MH (ED17) M70 M100 M150 M175 CF (Gx24q) Single lamp F157 F170 CF (Gx24q) Two lamp F226 F232 F242
Voltage
Finish
ASH: CP: RA3: RA4:
Options
Accessories 20” dia. alum. shade. Pole mounting adaptor. See page 22 Type III semi specular reflector. (Single lamps only.) Forward Throw type IV distribution Electrical FS: PH1 : PH2 : EM42S: Fuse 120/277V photo cell 347V photo cell 1 lamp (26/32/42W) EM battery.
AR10W *AR10WL *AR10W-UP
HPS (ED17) H70 H100 H150
* AR10WL: Max. 150W AR10W-UP: Max.100W (Lamps by others)
120 V Standard factory (Refer to color chart) prewired Standard selection (If no voltage is specified) WHT:Snow white For other voltages, please specify with catalog number. BKT: Jet black BZT : Bronze H.I.D. GRT: Titanium gray 208 V DGT: Gun metal Note: 50W.HPS 240 V is available with CHT: Champagne 277 V 120/277V only. MST: Matte silver 347 V GNT: Forest green Optional colors CS: Custom color COMP. FLUO. RAL: RAL# color Smart ballast 120/277 347 V (To specify)
luminaires may be altered for design improvements or discontinued without prior notice.
Note: EM optional battery test switch and pilot lamp are installed remotely. (See page 72) Available for wall mounted luminaires only Web: www.luminis.com
Sept.2006 Rev: Feb.2007
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Page 19
L U M IN I S
Argon with flat lens
Pole mount attachments
Argon with conical lens
ARGON
With top glow ring
Argon with lens/shade combination
5”
2 5/8” 23”
2 5/8”
21 1/2”
AR10-CP
With top glow ring
AR10L-CP
AR10-ASH-CP
(With flat lens & shade.)
With top glow ring
AR10WL-ASH-CP
(With conical lens & shade.)
Pole adaptor is factory designed and made to fit with 4” or 5” dia. pole. Please refer to page 145 for additional details.
With Closed top
AR12-CP
AR12L-CP
With Closed top
AR12-ASH-CP
(With flat lens & shade.)
With Closed top
AR12L-ASH-CP
(With conical lens & shade.)
White translucent diffuser.
AR15-CP
White translucent diffuser.
AR15L-CP
White translucent diffuser.
AR15-ASH-CP
(With flat lens & shade.)
AR15L-ASH-CP
(With conical lens & shade.)
Mounting: Installation: Connects to a standard 4” or 5” O.Dia. x .125” thick wall pole
General notes :
Please refer to corresponding specification sheet for desired luminaire detail.
RA3 and RA4 Options are available with a single lamp installation
AR10-CP AR12-CP AR15-CP EPA .93
AR10L-CP AR12L-CP AR15L-CP .95
AR10-ASH-CP AR12-ASH-CP AR15-ASH-CP .95
AR10L-ASH-CP AR12L-ASH-CP AR15L-ASH-CP 1.27
Compatible poles listing.
4”O.D. 5”O.D. 4”O.D.
Pole height 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft
PAA410-CP PAA510-CP PXD10-CP PAA412-CP PAA512-CP PXD12-CP PAA414-CP PAA514-CP PXD14-CP PAA416-CP PAA516-CP PXD16-CP PAA418-CP PAA518-CP PXD18-CP PAA420-CP PAA520-CP PXD20-CP For poles details and specification, please refer to pages 140 to 144
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept.2006 Rev: Feb.2007
Page 22
很抱歉,暂时无法提供与“AR10W-UP”相匹配的价格&库存,您可以联系我们找货
免费人工找货