ESSMJ-2-12-75

ESSMJ-2-12-75 2 Way 0° Power Divider, 5-1000 MHz Rev E Features • • • • 2 Way 0 Degree Surface Mount 75 Ohm Description M/A-COM ’ s ESSMJ-2-12-75 is a 2 Way 0o Power Divider in a low cost, Electrical Specifications @25 °C Parameter Frequency Range Insertion Loss 5 - 1000 5 - 500 MHz 500 - 1000 MHz surface Units MHz dB dB Typical — 0.4 0.5 Minimum — — — Maximum — 0.6 1.2 Isolation 5 - 600 MHz 600 - 1000 MHz dB dB 35 30 20 17.5 — — Amplitude Unbalance 5 - 600 MHz 600 - 1000 MHz dB dB — — — — 0.2 0.5 Phase Unbalance 5 - 100 MHz 100 - 500 MHz 500 –1000MHz 5 - 40 MHz 40 - 1000 MHz o o o — — — 20 25 — — — 12 20 1.5o 3.5o 4.0o — — Output Return Loss dB dB Input Return Loss 5 - 40 MHz 40 - 500 MHz 500 - 860 MHz 860-1000 MHz dB dB dB dB 20 24 21 19 13.5 20 17 14 — — — — Insertion Loss Flatness dB — — 0.9 V2.00 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. S 1226 E • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ESSMJ-2-12-75 Absolute Maximum Ratings Parameter Absolute Maximum Functional Configuration Function Not Connected External 75 Ohms Ground Case Ground Input Port 1 Port 2 Isolation 0.00 Pin No. 2,5 — 1 — 6 4 3 2 Way R0° Power Divider,15-1000 MHz F Power Watt Internal Load Dissipation Pin Temp (10 Sec) Storage Temperature Operating Temperature 0.125 Watt 260°C -55°C to 100°C -25°C to 85°C Rev E Typical Performance @ +25°C Insertion Loss -3.00 -3.20 -10.00 -3.40 dB -20.00 dB -3.60 -30.00 -3.80 -40.00 Op -4.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 -50.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 Frequency (MHz) Frequency (MHz) Amplitude Unbalance 0.18 Phase Unbalance 2.00 0.14 1.50 0.10 Degrees 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 1.00 dB 0.06 0.50 0.02 0.00 -0.02 -0.50 -0.06 Frequency (MHz) -1.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 Frequency (MHz) Output Return Loss 0.00 -5.00 -10.00 Input Return Loss 0.00 -5.00 -10.00 -15.00 -15.00 dB -20.00 -25.00 -30.00 O dB -20.00 -25.00 -30.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 -35.00 -40.00 Frequency (MHz) -35.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 Frequency (MHz) V2.00 S 1226 E ESSMJ-2-12-75 2 Way 0° Power Divider, 5-1000 MHz Rev E Absolute Maximum Ratings Parameter RF Power Internal Load Dissipation Pin Temp (10 Sec) Storage Temperature Operating Temperature Absolute Maximum 1 Watt 0.125 Watt 260°C -55°C to 100°C -25°C to 85°C Pin Configuration Function Not Connected External 75 Ohms Ground Case Ground Input Port 1 Port 2 Pin No. 2,5 — 1 — 6 4 3 SM-44 Package V2.00 S 1226 E