MAPD-009673-C2DA40

MAPD-009673-C2DA40 2 Way 0º Power Divider 5 to 1000 MHz Features • • • • • • Surface mount. 2 Way 0 degree. 260°C reflow compatible. RoHS* compliant. Available on tape and reel. Recommended for Pb free process. M/A-COM Products Released, Rev. V2 Schematic with off-chip components Description M/A Com’s MAPD-009673-C2DA40 is a 2 way 0 degree RF power divider in a low cost, surface mount package. Ideally suited for high volume CATV & VSAT applications. Two 0603 1pF capacitors and one 200Ω resistor are required with this part. Case style: SM-150 Pin configuration Pin no. 1 2 3 4 5 6 Function Output 1 External 1pF Capacitor to ground Ground Input External 1pF Capacitor to ground Output 2 Unless otherwise stated dimensions are in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Pins 2 and 5 need to be connected together on the PCB as shown above. Ordering information Part number MAPD-009673-C2DA40 Description Reel quantity 2000 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-009673-C2DA40 2 Way 0º Power Divider 5 to 1000 MHz M/A-COM Products Released, Rev. V2 Electrical specifications: TA = 25°C, Z0 = 75Ω, Pin = 0dBm Parameter Insertion Loss (Above 3dB) Frequency 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz Units dB dB dB dB dB dB º º º dB dB dB dB dB dB Min 23 16 17 18 20 14 Typ 0.3 0.5 1.1 0.2 0.2 0.4 0.5 1.0 1.5 35 22 24 35 32 20 Max 0.5 1.1 2.2 ± 0.5 ± 0.3 ± 0.9 ±4 ±4 ±6 - Amplitude Unbalance Phase Unbalance Return Loss: Input Isolation (between outputs) Recommended maximum ratings Parameter Input power Internal Load Dissipation Operating temperature Storage temperature Value 1W 0.125W -40°C to +80°C -40°C to +85°C Application Circuit 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-009673-C2DA40 2 Way 0º Power Divider 5 to 1000 MHz Typical performance curves: TA = 25°C, Z0 = 75Ω, Pin = 0dBm Insertion loss 1: pin 4 to pin 1 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 - 2.0 5 204 403 602 801 1000 M/A-COM Products Released, Rev. V2 Insertion loss 2: pin 4 to pin 6 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0 dB dB 5 204 403 602 801 1000 Frequency (MHz) Frequency (MHz) Amplitude balance 1 .0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1 .0 Phase balance 5 4 3 2 1 0 -1 -2 -3 -4 -5 5 204 403 602 801 1 000 Degrees dB 5 204 403 602 801 1 000 Frequency (MHz) Frequency (MHz) Return loss: Input 0 -10 -20 Isolation 0 -10 -20 -30 -40 -50 dB -30 -40 -50 5 204 403 602 801 1000 dB 5 204 403 602 801 1000 Frequency (MHz) Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.