MAPDCC0020-TR

MAPDCC0020 Low Cost Six-Way SMT Power Divider 1700 – 2000 MHz Features • • • • • • • • • • Small Size, Low Profile Superior Repeatability (Lot-to-Lot Variation) Typical Isolation 25 dB Typical Insertion Loss 1.0 dB Low Cost Lead-Free SOIC-16 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS56-0006 Rev. V2 Functional Block Diagram1 Description M/A-COM’s MAPDCC0020 is an IC-based monolithic power splitter/combiner in a low cost SOIC-16 plastic package. This 6-way power divider is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include base stations, portables, and peripheral devices (PCMCIA cards) for wireless standards such as PCS, PCN, DECT, PHS, and DCS-1800. Available in Tape and Reel. The MAPDCC0020 is fabricated using passiveintegrated circuit process. This process features fullchip passivation for increased performance and reliability. 1. All unused pins must be RF and DC grounded. Pin Configuration Pin No. 1 2 Function GND RF 3 (OUT) GND RF 2 (OUT) GND RF 1 (OUT) GND RF IN Pin No. 9 10 11 12 13 14 15 16 Function GND GND RF 6 (OUT) GND RF 5 (OUT) GND RF 4 (OUT) GND Ordering Information Part Number MAPDCC0020 MAPDCC0020-TR MAPDCC0020-TB 3 4 Package Bulk Packaging 1000 piece reel Sample Test Board 5 6 7 8 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0020 Low Cost Six-Way SMT Power Divider 1700 – 2000 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Insertion Loss above 7.8 dB 1700 – 2000 MHz 1850 – 1910 MHz Isolation 1700 – 2000 MHz 1850 – 1910 MHz VSWR Input 1700 – 2000 MHz 1850 – 1910 MHz Output 1700 – 2000 MHz 1850 – 1910 MHz Amplitude Balance 1700 – 2000 MHz 1850 – 1910 MHz Phase Balance 1700 – 2000 MHz 1850 – 1910 MHz Rev. V2 Units dB dB dB dB — — — — dB dB Deg. Deg. Min — — 18 21 — — — — — — — — Typ 1.3 1.0 25 26 1.7:1 1.3:1 1.3:1 1.1:1 0.8 1.0 10 8 Max 1.8 1.5 — — 2.0:1 1.7:1 1.7:1 1.3:1 1.3 1.3 20 16 Absolute Maximum Ratings 2,3 Parameter Input Power4 Operating Temperature Storage Temperature Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum 1 W CW -40°C to +85°C -65°C to +150°C Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W maximum. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0020 Low Cost Six-Way SMT Power Divider 1700 – 2000 MHz Typical Performance Curves Insertion Loss vs. Frequency Amplitude Imbalance vs. Frequency Rev. V2 Isolation vs. Frequency Phase Imbalance vs. Frequency Input VSWR vs. Frequency Output VSWR vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0020 Low Cost Six-Way SMT Power Divider 1700 – 2000 MHz Lead-Free, SOIC-16† Rev. V2 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.