MAPDCT0029

MAPDCT0029 2 Way 0º Power Divider 5-1000MHz Features • • • • • Surface Mount 2 Way 0 degree 260°C Reflow Compatible RoHS* Compliant Available on Tape and Reel. Released Rev. V2 Functional Block Diagram Description M/A-COM’s MAPDCT0029 is 2 way 0 degree RF power divider in a low cost, surface mount package. A 160 Ohm resistor included on the component. Ideally suited for high volume CATV/Broadband applications. Pin Configuration Pin No. 1 2 3 4 5 6 Function Ground Not connected (ground) Output 2 Output 1 Not connected (ground) Input Absolute Maximum Ratings 1,2 Ordering Information Part Number Package Parameter Max Input Power DC current Operating Temperature Absolute Maximum 1W 240mA -40°C to +85°C -55°C to +100°C MAPDCT0029TR 900 piece reel Reference Application Note M513 for reel size information. Storage Temperature 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0029 2 Way 0º Power Divider 5-1000MHz Electrical Specifications: TA = 25°C, Z0 = 75Ω 1 Parameter Insertion Loss Insertion Loss Amplitude Unbalance (Nominal 0dB) Phase Unbalance (Nominal 0º) Return Loss: Input Return Loss: Input Return Loss: Input Return Loss: Output Isolation (between outputs) Isolation (between outputs) Isolation (between outputs) Released Rev. V2 Test Conditions - Frequency 5 - 500 MHz 500 - 1000 MHz 5 - 1000 MHz Units dB dB dB Min - Typ 0.5 0.7 ± 0.28 Max 0.7 1.4 ± 0.55 - 5 - 1000 MHz 5 - 50 MHz 50 - 870 MHz 870 - 1000 MHz 5 - 1000 MHz 5 - 50 MHz 50 - 870 MHz 870 - 1000 MHz º dB dB dB dB dB dB dB 24 14 11 15 20 14 12 ± 1.0 35 26 16 22.5 26 22 15 ± 3.0 - Case Style: SM-55 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0029 2 Way 0º Power Divider 5-1000MHz Typical Performance Curves: TA = 25°C, Z0 = 75Ω 1 Insertion Loss 0.0 -0.1 -0.2 -0.3 -0.4 -15 Released Rev. V2 Isolation 0 -5 -10 dB dB -0.5 -0.6 -0.7 -0.8 -0.9 -1.0 5 204 403 602 801 1000 -20 -25 -30 -35 -40 5 204 403 602 801 1000 F re quenc y ( M H z) F re que nc y (M H z) Amplitude Unbalance 1.0 0.8 0.6 0.4 0.2 Phase Unbalance 2.0 1.5 1.0 degree 0.5 0.0 -0.5 -1.0 -1.5 -2.0 dB 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 5 204 403 602 801 1000 5 204 403 602 801 1000 Frequency (M Hz) Frequency (M Hz) Return Loss: Input 0 -5 -10 -15 Return Loss: Output 0 -5 -10 -15 dB dB -20 -25 -30 -35 -40 5 204 403 602 801 1000 -20 -25 -30 -35 - 40 5 204 403 602 801 1000 F re que nc y ( M H z) 3 F reque nc y ( M H z) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.