MASW-000825-001SMB

MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Features         Exceptional Broadband Performance, 0.05 - 6.0 GHz Low Loss: Tx = 0.24 dB Avg @ 2025 MHz, 35mA Tx = 0.38 dB Avg @ 3500 MHz, 35mA High Isolation: Rx = 31.0 dB Avg @ 2025 MHz Rx = 27 dB Avg @ 3500 MHz High RF C.W. Input Power: 20 W C.W. (Tx-Ant Port) Higher IIP3: > 64 dBm (Tx-Ant Port ) Suitable for High Power TD-SCDMA & WiMAX Applications  Surface Mount 3mm PQFN Package  RoHS* Compliant and 260°C Re-flow Compatible Rev. V4 Functional Diagram (TOP VIEW) PIN14 PIN 3 PIN10 Description and Applications The MASW-000825-12770T is a compact SP2T PIN diode switch in a lead-free 3mm MLP plastic package that offers extraordinary performance with excellent isolation to loss ratio for both TX and RX states. The SP2T provides outstanding 20 W C.W. power handling coupled with 64 dBm IIP3 for maximum switch performance. The MASW-000825-12770T is a 0.05 - 6.0GHz SP2T High Peak and Average Power PIN diode switch used for T/R or LNA Protect Switch applications such as WiMAX and TDSCDMA. This device incorporates a PIN diode die fabricated with M/A-COM Technology Solutions patented Silicon-Glass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. Circuit Side View PIN1 PIN IDENTIFIER PIN 16 Pin Configuration: (Center Metal Area is RF, D.C., and Thermal Ground) PIN 1 2 3 4 Function N/C GND TX GND N/C N/C N/C N/C PIN 9 10 11 12 13 14 15 16 Function GND Rx GND N/C GND Ant GND N/C Ordering Information Part Number MASW-000825-12770T MASW-000825-001SMB MADR-008888-0002TB Package 1000 piece reel Sample Board Sample Board with recommended external Driver & MASW-00082512770T Switch 5 6 7 8 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance Z0 = 50 Ω, 35mA/28V Parameter F = 2.0-2.7 GHz Insertion Loss, Rx Insertion Loss, Tx Isolation, Tx To Rx Isolation, Rx To Tx Tx Input Return Loss Rx Input Return Loss F = 3.3-3.8 GHz Insertion Loss, Rx Insertion Loss, Tx Isolation, Tx To Rx Isolation, Rx To Tx Tx Input Return Loss Rx Input Return Loss F = 4.9-5.9 GHz Insertion Loss, Rx Insertion Loss, Tx Isolation, Tx To Rx Isolation, Rx To Tx Tx Input Return Loss Rx Input Return Loss Rx, IL Tx, IL Rx, ISO Tx, ISO Tx, RL Rx, RL Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm dB dB dB dB dB dB 19.5 16.5 0.95 0.59 22.4 18.5 - 25 - 24 1.10 0.71 Rx,IL Tx, IL Rx, ISO Tx, ISO Tx, RL Rx, RL Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm dB dB dB dB dB dB 22 19.7 0.56 0.38 26 21.6 - 28 -28 0.71 0.48 Rx, IL Tx, IL Rx, ISO Tx, ISO Tx, RL Rx, RL Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm Bias: See Table Below, Pinc= 0 dBm dB dB dB dB dB dB 24.5 21.3 0.42 0.29 28.6 24.2 - 28 - 28 0.55 0.38 Rev. V4 Symbol 35mA / 28V Conditions Units Min. Typ. Max. Port Pin Tx-ANT Isolation Tx-ANT Insertion Loss Rx-ANT Isolation Rx-ANT Insertion Loss 2 Tx Pin 3 +28V @ 0 ma 0V 0V +28V @ 0 ma Rx Pin 10 0V +28V @ 0 ma +28V @ 0 ma 0V ANT Pin 14 + 5V @ 35 mA + 5V @ 35 mA + 5V @ 35 mA + 5V @ 35 mA • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications at +25°C, Characteristic Impedance, Z0 = 50 Ω Parameter Tx 2nd Harmonic Rev. V4 Symbol Tx 2Fo Tx 3Fo Conditions Fo=2.010 GHz, Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA Pin = + 30 dBm, Tx To Antenna Fo= 2.010 GHz, Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA Pin = + 30 dBm, Tx To Antenna Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA Pi= +20 dBm, F1 = 2.010 GHz, F2 = 2.020 GHz, Tx To Antenna Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010, 3.500 GHz, Tx To Antenna Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010 GHz, Tx To Antenna ( 5 μS RF Pulse Width, 1% Duty 1.10:1 Ant VSWR ) Rx = +5.0 V@ +35mA, Tx =+28V @ 0mA F = 2.010 GHz, Antenna to Rx Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010, GHz, Tx To Antenna ( 10% - 90% RF Voltage) Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA F = 2.010 GHz, Tx To Antenna 1MHz Rep Rate in Modulating Mode Units dBc Min Typ 70 Max Tx 3rd Harmonic dBc 86 Tx Input Third Order Intercept Point Tx IIP3 dBm 64 2 Tx C.W. Input Power Tx CW Pinc dBm W 43 20 Tx Peak Input Power Tx Pk Pinc dBm W 53 200 Rx C.W. Input Power Rx CW Pinc Tx P1dB dBm W dBm >43 39 8 Tx Input P1dB Tx RF Switching Speed RF ns 200 Absolute Maximum Ratings 1 @ TA = +25 °C (unless otherwise specified) Parameter Forward Current Reverse Voltage ( RF & D.C. ) Operating Temperature Storage Temperature Junction Temperature 2 Tx Incident C.W. Power Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum 100 mA -140 V -40 °C to +85 °C -55 °C to +150 °C +175 °C 20 W C.W. 150 W, 5 uS P.W., 1% Duty Static Sensitivity These devices are rated Class 1B Human Body. Proper ESD control techniques should be used when handling these devices. Tx Peak Incident Power With 3.0:1 Maximum Ant VSWR 1. Exceeding these limits may cause permanent damage. 2. Refer to page 7 of the datasheet for power handling curves. 3 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications D.C. Bias to RF Truth Table RF State Low Loss Tx-Ant & Isolation Tx-Rx Low Loss Ant-Rx & Isolation Rx-Tx TTL & D.C. Bias Conditions TTL = 1 + 5V @ 35 mA ( Tx ), + 28V @ 0 mA ( Rx ) TTL = 0 + 5V @ 35 mA ( Rx ), + 28V @ 0 mA ( Tx ) Voltage at Common Anode + 0.9 V + 0.9 V Rev. V4 Driver and SP2T Schematic with Positive Voltage Ant DC Block LBias R5 Bypass 180 Ω +5 V TX DC Block LBias SP2T DC Block RX LBias Bypass Bypass MADR-008888-000100 Logic Input Driver Ground Notes: 1. Data is taken on M/A-COM evaluation board 1000029181-0000001 @ 25C by removing peripheral board losses ( connectors, transmission line, and bias elements ). 2. Typical PIN Diode Forward Voltage = + 0.9 V @ + 35 mA for Insertion Loss. Typical PIN Diode Reverse Voltage = 28 V – 1.0 V = 27 V for Isolation. 3. Switch is Asymmetrical, + 43 dBm RF C.W. Input Power Applies to Tx Port Only. 4. Center Ground Area of MLP 3mm Package must be Attached to Thermal Ground for Optimum RF Power Performance. 5. M/A-Com Recommends the usage of the MADR-008888-000100 driver with this switch. Assembly Note: A typical soldering process profile and handling instructions are provided in Application Notes, S2083 “Surface Mount Instructions for QFN / DFN Packages” on the M/A-Com website at www.macomtech.com 4 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 Typical Small Signal Performance at +25°C, Characteristic Impedance, Z0 = 50 Ω MASW-000825-1277OT, TX/RX Insertion Loss Bias:+5V @ 35mA 0.0 -0.1 -0.2 MASW-000825-1277OT, TX/RX Isolation Bias:+28V @ 0mA -15.0 -20.0 -25.0 TX RX Insertion Loss (dB) Isolation (dB) -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 0.0 -30.0 -35.0 -40.0 -45.0 -50.0 -55.0 0.0 TX RX 1.0 2.0 3.0 4.0 5.0 6.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (GHz) Frequency (GHz) MASW-000825-1277OT, TX/RX Return Loss Bias:+5V @ 35mA 0.0 -5.0 -10.0 Return Loss (dB) -15.0 -20.0 -25.0 -30.0 -35.0 -40.0 0.0 TX RX 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (GHz) 5 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 Typical Small Signal Performance over Temperature Characteristic Impedance, Z0 = 50 Ω MASW-000825-1277OT, TX to Antenna TX Diode Tj Vs. Bias Current Bias: TX= +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz PCB Temperature is +25ºC 200.0 175.0 150.0 125.0 MASW-000825-1277OT, TX to Antenna Maximum Pin Vs. PCB/Heatsink Temperature Vs. Bias Current Bias: +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz 44.0 43.5 43.0 42.5 42.0 41.5 41.0 40.5 40.0 25.0 20mA 35mA 20mA 35mA 100.0 75.0 50.0 25.0 0.0 30.0 32.0 34.0 36.0 38.0 40.0 42.0 44.0 Pin (dBm) Tj (ºC) 35.0 45.0 55.0 65.0 75.0 85.0 Pin (dBm) PCB/Heatsink Temperature (ºC) MASW-000825-1277OT, TX Insertion Loss Vs. Temperature Bias:+5V @ 35mA 0.0 -0.1 -0.2 MASW-000825-1277OT, RX Insertion Loss Vs. Temperature Bias:+5V @ 35mA 0.0 -0.1 -0.2 Insertion Loss (dB) -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 0.0 Insertion Loss (dB) -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 0.0 +25ºC -40ºC +85ºC +25ºC -40ºC +85ºC 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) 6 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V4 Typical Small Signal Performance over temperature Characteristic Impedance, Z0 = 50 Ω MASW-000825-1277OT, TX Insertion Loss Vs. Temperature Bias:+5V @ 35mA 0.0 -0.1 -0.2 -15.0 -20.0 -25.0 MASW-000825-1277OT, RX Isolation Vs. Temperature Bias:+28V @ 0mA Insertion Loss (dB) Isolation (dB) -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 0.0 -30.0 -35.0 -40.0 -45.0 -50.0 -55.0 0.0 +25ºC -40ºC +85ºC +25ºC -40ºC +85ºC 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) MASW-000825-1277OT, TX Return Loss Vs. Temperature Bias:+5V @ 35mA -20.0 -20.0 MASW-000825-1277OT, RX Return Loss Vs. Temperature Bias:+5V @ 35mA -25.0 -25.0 Return Loss (dB) Return Loss (dB) -30.0 -30.0 -35.0 +25ºC -40ºC +85ºC -35.0 +25ºC -40ºC +85ºC -40.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 -40.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) 7 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000825-12770T HMICTM PIN Diode SP2T 20 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications MASW-000825-12770T Outline† – Lead Free 3mm PQFP-N 16 Lead Saw Singulated ANT Port PIN 14 Rev. V4 TX Port TX 3 PIN Port PIN 3 RX Port PIN 10 ANT Port PIN 14 † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 8 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.