MASW-008853-TR3000

MASW-008853 GaAs SPDT 2.7 V High Power Switch DC - 5.0 GHz Features • • • • • • • • • Low Voltage Operation: 2.7 V High Power: +38dBm (typ) P0.1dB High IP3: +56 dBm Low Insertion Loss: 0.25 dB @ 1 GHz High Isolation: 25 dB @ 1 GHz Lead-Free SC70 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Rev. V2 Functional Block Diagram Description M/A-COM’s MASW-008853 is a GaAs PHEMT MMIC single pole double throw (SPDT) high power switch in a low cost SC70 six lead package. The MASW-008853 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size, and low cost are required. Typical applications are for CDMA handset systems that connect separate transceiver and/or GPS functions to a common antenna, as well as other related handset and general purpose applications. The MASW-008853 can be used in all systems operating up to 5.0 GHz requiring high power at low control voltage. The MASW-008853 is fabricated using a 0.5 micron gate length GaAs pHEMT process. The process features full passivation for performance and reliability. Pin Configuration Pin No. 1 2 3 4 5 6 Pin Name RF1 GND RF2 V2 RFC V1 Description RF Port 1 RF Ground RF Port 2 Vcontrol 2 RF Common Vcontrol 1 Absolute Maximum Ratings 3,4 Parameter Input Power (0.5 - 3 GHz, 3 V Control) Absolute Maximum +38 dBm +8.5 volts -40°C to +85°C -65°C to +150°C Ordering Information 1,2 Part Number MASW-008853-000000 MASW-008853-TR3000 MASW-008853-001SMB Package Bulk Packaging 3000 piece reel Sample Test Board Operating Voltage Operating Temperature Storage Temperature 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008853 GaAs SPDT 2.7 V High Power Switch DC - 5.0 GHz Electrical Specifications: TA = 25°C, VC = 0 V/2.7 V, Z0 = 50 Ω 5 Parameter Test Conditions 1 GHz 2 GHz 3 GHz 4 GHz 5 GHz 1 GHz 2 GHz 3 GHz 4 GHz 5 GHz DC – 3 GHz 825 MHz Two Tone, +24 dBm Total Pin, 5 MHz Spacing Two-tone signal input: Tx1 = +22 dBm @ 820 MHz, Tx2 = +22 dBm @ 821 MHz, RX interfere = -23 dBm @ 869 MHz Cross Modulation Two-tone signal input: Tx1 = +18 dBm @ 1880 MHz, Tx2 = +18 dBm @ 1881 MHz, RX interfere = -23 dBm @ 1960 MHz P0.1dB Trise, Tfall Ton, Toff Transients Control Current 1 GHz 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, 50% control to 10% RF In Band VC = 2.7 V dBm — -94 — Units dB dB dB dB dB dB dB dB dB dB dB dBm Min. — — — — — 23 — — — — — — Typ. 0.30 0.36 0.45 0.70 1.10 25 19 15 13 11 20 56 Max. 0.65 — — — — — — — — — — — Rev. V2 Insertion Loss6 Isolation Return Loss IP3 dBm — -99 — dBm nS nS mV µA — — — — — 38 70 100 25 5 — — — — 20 5. For positive voltage control, external DC blocking capacitors are required on all RF ports. 6. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz. Truth Table 7,8,9 V1 V2 ANT– RF1 ANT - RF2 Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. 1 0 0 1 On Off Off On Handling Procedures Please observe the following precautions to avoid damage: 7. For positive voltage control, external DC blocking capacitors are required on all RF ports. 8. Differential voltage, V(state 1) - V(state 0), must be +2.7 V minimum, but must not exceed 8.5 V. 9. 0 = -5 V to +2.3 V, 1 = -2.3 V to +5 V. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008853 GaAs SPDT 2.7 V High Power Switch DC - 5.0 GHz Typical Performance Curves, 1000 pF Insertion Loss 0.00 -0.25 -0.50 Rev. V2 Isolation 0 -10 -20 -0.75 -1.00 -1.25 -1.50 0 1 2 3 4 5 +25 C -40 C +85 C -30 +25 C -40 C +85 C -40 -50 0 1 2 3 4 5 Frequency (GHz) Frequency (GHz) RFC Return Loss 0 -10 -20 -30 -40 -50 -60 0 1 2 3 4 5 Lead-Free SC70 Plastic Package† +25 C -40 C +85 C Frequency (GHz) RF1/RF2 Return Loss 0 -10 -20 † +25 C -40 C +85 C -30 -40 -50 -60 0 1 2 3 4 5 Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.