MASWSS0121TR

MASWSS0121 SPDT High Isolation Terminated Switch 0.5 - 3.0 GHz Features • Positive Voltage Control (0 / +5 V) • High Isolation: 54 dB @ 0.9 GHz 52 dB @ 1.9 GHz • 50-Ohm Internal Terminations • Low Insertion Loss: 0.6 dB @ 0.9 GHz 0.7 dB @ 1.9 GHz • Lead-Free Package: 4 mm 16-Lead PQFN • 100% Matte Tin Plating over Copper • Halogen-Free “Green” Mold Compound • 260°C Reflow Compatible • RoHS* Compliant Version of SW-475 Rev. V3 Functional Schematic 16 15 14 13 RF2 1 2 3 4 RFC RF1 12 11 10 9 Description The M/A-COM MASWSS0121 GaAs monolithic switch provides high isolation in a low-cost, lead-free plastic surface mount package. The MASWSS0121 is ideal for applications across a broad range of frequencies including synthesizer switching, transmit / receive switching, switch matrices and filter banks in systems such as radio and cellular equipment, PCS, GPS, and fiber optic modules. M/A-COM fabricates the MASWSS0121 using a 1.0micron gate length MESFET process. The process features full chip passivation for performance and reliability. V1 V2 5 6 7 8 PIN Configuration Pin 1 2 3 4 5 6 7 Function RF2 GND GND V1 V2 GND RFC GND GND GND GND RF1 GND GND GND GND GND Description RF port RF ground RF ground Control 1 Control 2 RF ground RF port RF ground RF ground RF ground RF ground RF port RF ground RF ground RF ground RF ground RF ground Ordering Information 1 Part Number MASWSS0121 MASWSS0121TR MASWSS0121TR-3000 MASWSS0121SMB Package Bulk Packaging 1000 piece reel 3000 piece reel Sample board 8 9 10 11 12 13 14 15 16 17 (pad) 2 1. Reference Application Note M513 for reel size information. 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0121 SPDT High Isolation Terminated Switch 0.5 - 3.0 GHz Electrical Specifications: TA = 25 °C, Z0 = 50 Ohms, VC = 0, 5.0 V 3 Parameter Insertion Loss Isolation Return Loss Input IP2 Input IP3 P1dB P0.1dB TRISE, TFALL TON, TOFF Transients Control Current Rev. V3 Test Conditions 0.5- 1 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 0.5 - 1 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 0.5 - 1 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 2-Tone 900 MHz, 5 MHz spacing 2-Tone 900 MHz, 5 MHz spacing 1 GHz, 5 V 1 GHz, 3 V 1 GHz, 5 V 1 GHz, 3 V 10% to 90% RF & 90% to 10% RF 50% of VC to 10 % / 90% RF VC = 5.0 V square wave, in-band │Vc│ = 4.5 V, 0 dBm Units dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm nS nS mV µA Min. — — — 51 48 45 — — — — — — — — — — — — — Typ. 0.6 0.7 0.75 54 52 50 20 20 20 83 46 27 18 24 11 24 15 12 2 Max. 0.7 0.8 0.9 — — — — — — — — — — — — — — — 13 3. External DC blocking capacitors are required on all RF ports (47 pF capacitors are recommended). Absolute Maximum Ratings 4,5 Parameter Input Power (0.5 - 3.0 GHz) 3 V Control 5 V Control Operating Voltage Operating Temperature Storage Temperature Truth Table V1 0 1 Absolute Maximum +30 dBm +33 dBm +8.5 volts -40°C to +85°C -65°C to +150°C V2 1 0 RFC - RF1 ON OFF RFC - RF2 OFF ON Logic Level 0 1 Voltage Level 0 V ± 0.2 V 3.0 V to 8.0 V 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0121 SPDT High Isolation Terminated Switch 0.5 - 3.0 GHz Typical Performance Curves Return Loss 30 Output RL "OFF" State Input Return Loss "ON" State Rev. V3 Insertion Loss Over Temperature 0.8 +25°C +85°C -40°C 25 0.7 20 0.6 15 0.5 10 0.5 1.0 1.5 2.0 2.5 3.0 0.4 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Isolation Over Temperature 65 +25°C +85°C -40°C 60 55 50 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Lead-Free 4 mm 16-Lead PQFN† 3 † Reference Application Note M538 for lead-free solder reflow recommendations. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.