6EUP

CORCOM Product Guide RFI Filter for Power Factor Corrected Power Supplies U Series UL Recognized CSA Certified VDE Approved 6EU1 6EUP U Series The U series is designed to meet the RFI needs created by power factor corrected power supplies. This high performance filter offers a high impedance circuit to mismatch the power supply’s impedance characteristics. The economical design allows superior performance at a reasonable price. The PC board mountable version has a low profile case which adapts well to most modular power converter applications. All models meet low leakage current requirements of VDE portable equipment, and (120 Volt) UL544 and UL2601 non-patient medical equipment. Specifications Maximum leakage current,each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage (max.): Rated current: Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating 6A .05 4 .1 30 Frequency-MHz .15 .5 1 5 40 70 70 70 10 65 30 50 .30 mA .50 mA 2250 VDC 1450 VDC 50/60 Hz 250 VAC 6.5 amps Line-to-line in 50 ohm circuit Electrical Schematic LINE LOAD Current Rating 6A .05 10 .1 35 Frequency-MHz .15 .5 1 5 45 70 70 70 10 65 30 55 Resistor location for reference only. 96 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide RFI Filter for Power Factor Corrected Power Supplies (Continued) U Series RFI Power Line Filters Case Styles 6EU1 Case Dimensions Part No. 6EUP A (max) 4.70 119.4 4.95 125.73 B (max) 2.51 63.8 2.27 57.66 C (max) 1.22 31.0 1.80 45.72 D ± .015 ± .38 E (max) — — B 6EU1 4.060 4.47 103.12 113.54 C Part Numbers 6EUP 6EU1 D E A Typical dimensions: Terminals: .250 [6.35] (5) Slot: .07 x .16 [1.8 x 4.1] Holes: .07 [1.8] Dia.(4) Mounting holes: .188 [4.78] Dia. (2) Recommended PC Board Layout LINE .157 Dia. (3) .075 Dia. (6) .26 6.60 6EUP LOAD 1.50 38.1 .75 19.05 .52 13.21 B 2.99 75.95 2.10 53.34 1.50 38.1 .79 20.07 .14 3.56 6-32 insert (3) ground (2) .39 9.91 C A 97