ETC1-1T-2TR

E-Series RF 1:1 Transformer 0.05 – 3 MHz Features • 1:1 Impedance Ratio • Surface Mount • Tape and reel packaging available ETC1-1T-2 V2 SM - 22 Package Description M/A-COM’s ETC1-1T-2 is a 1:1 RF transformer in a low cost, surface mount package. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter RF Frequency Insertion Loss Amplitude Imbalance Phase Imbalance Test Conditions — — — — — — — Frequency 0.05 - 3 0.05 - 3 0.2 - 3 0.05 - 3 0.2 - 3 0.05 - 3 0.2 - 3 Units MHz dB dB dB dB Degrees Degrees Min — — — — — — — Typ — — — — — — — Max — 2.0 1.0 0.2 0.1 2° 1° Absolute Maximum Ratings 1 Parameter RF Power DC Current Operating Temperature Storage Temperature Ordering Information Part Number ETC1-1T-2TR Absolute Maximum 250 mW 30 mA -40°C to +85°C -55°C to +125°C Package Tape and Reel (2000 piece Reel) 1. Operation of this device above any one of these parameters may cause permanent damage. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series RF 1:1 Transformer 0.05 – 3 MHz Pin Configuration Pin No. 1 2 3 4 5 ETC1-1T-2 V2 Schematic Function Secondary Secondary CT Secondary Dot Primary Dot Primary 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.