External Chambers Sealed or Flanged Top
Technical Reference Manual
TABLE
OF
CONTENTS
Design Construction Comparison ...................................................................................................................................2 Dimensional Information Head Flange Type ....................................................................................................................................................3 Probe Length ...........................................................................................................................................................3 Physical Specifications ...................................................................................................................................................4 Model Number ............................................................................................................................................................4-5 Dimensional Specifications Slip-On Flanged Chamber Design - Commercial Construction .................................................................................6 Slip-On Flanged Chamber Design - ANSI B31.3 Construction..................................................................................7 Slip-On Flanged Chamber Design - ANSI B31.1 Construction..................................................................................7 Weldneck Flanged Chamber Design - Commercial Construction..............................................................................8 Weldneck Flanged Chamber Design - ANSI B31.3 Construction ..............................................................................9 Weldneck Flanged Chamber Design - ANSI B31.1 Construction .......................................................................10-11 Sealed Chamber Design - Commercial Construction..............................................................................................12 Sealed Chamber Design - ANSI B31.3 Construction ..............................................................................................13 Sealed Chamber Design - ANSI B31.1 Construction ..............................................................................................14
DESIGN
CONSTRUCTION
COMPARISON
Comm B31.3 • • ≤1500# • B31.1 • ≤300# • NACE • • •
ASME grade and NACE listed materials Certificate of Conformance on materials Slip-on head and process flanges Weld neck head and slip-on process Weld neck head and process flanges Pipe to pipe branch connections Bonney type fittings ASME Section IX welding procedures Welding by ASME qualified welders per ASME Section IX procedures Full penetration chamber branch welds Full penetration circumferential welds 100% visual inspection of circumferential welds for full penetration Hydrostatic test at 1.5 × rated pressure Certified ten minute hydrostatic test at 1.5 × rated pressure • flanges
≤600# •
3" 1500# 5000 psi ≥600# • • •
≥900#
≤600#
• • •
≥900# •
≥1500# ≥600# ≥1500# ≥600# • • • CS SS • • • • • • • •
Five percent radiographic examination of full penetration circumferential welds Post weld heat treatment Annealing, if required for hardness Hardness testing of welds and adjacent heat affected zones Flanged or sealed chambers Stress limits per design code
Unless weldneck process flanges are specified in model number Except 3" 1500# cage Except 2" 1500# cage
2
DIMENSIONAL
HEAD FLANGE TYPE
INFORMATION
Design Standard (third digit)
Chamber Rating (fifth digit) 150# (A) 300# (B)
Process Connection Type (seventh digit) NPT (A, G) Socket Weld (B, H) Slip-on RF (D, K) Weldneck RF (E, L) Weldneck RTJ (F, M)
Commercial (1, 5)
600# (C) 900# (D) 1500# (E) 5000 psi (F) 150# (A) 300# (B) Slip-on raised face
ASME B31.3 (4, 7)
600# (C) 900# (D) 1500# (E) 5000 psi (F) 150# (A) 300# (B) Weldneck raised face Slip-on raised face * n/a
Weldneck raised face
ASME B31.1 (3)
600# (C) 900# (D) 1500# (E) 5000 psi (F) Weldneck raised face n/a
* 1500# ASME B31.3 will have a slip-on head flange on 2" cage and weldneck head flange on 3" cage PROBE LENGTH
If utilizing a sealed top chamber, go to pages 13 & 14 for ‘A’ dimension. To properly size your sensing element when mounting in a flange top chamber, it is necessary to determine the dimension from the face of the head flange to the centerline of the upper process connection. To determine this dimension: 1. Use the third, fifth & seventh digits of your chamber model number and the above chart to verify the type of head flange on your chamber. 2. On pages 6–12, locate the ‘A’ dimension of your chamber according to the chamber pressure rating, head flange type, design standard, chamber size & process connection size. 3. Go to the formulas on page 4 for probe or cable lengths. Using your ‘A’ dimension and measuring range (customer designated), determine your required probe length.
A
A
A
Measuring Range
Measuring Range
Measuring Range
1" NPT drain
1" NPT drain
Sealed Chamber
Slip-on head flange
Weldneck head flange
3
PHYSICAL
Measuring span length Eclipse probe length sealed cage flanged cage Kotron probe length sealed cage
SPECIFICATIONS
From 12 to 240 inches (30-610 cm) Measuring range + A + 5 inches (13 cm) (rounded down to nearest inch) Measuring range + A + 6 inches (15 cm) (rounded down to nearest inch) Measuring range + A + 3 inches (7 cm) (rounded down to nearest inch)
flanged cage Displacer cable length (min.) Materials of Construction Sensor Connections Process Connection Sizes Process Connection Ratings Process Connection Types Connection Configurations Process Pressures Process Temperatures
Measuring range + A + 4 inches (10 cm) (rounded down to nearest inch) Measuring range + A + 6 inches (15 cm) (rounded up to nearest foot) Carbon steel or 316 stainless steel (head flange bolting ASTM A193 GrB7 regardless of chamber material) 3 ⁄4" or 2" NPT, 2" or 3" flange from 150# to 2500# ANSI 3 ⁄4", 1", 11⁄2" or 2" 150#, 300#,600#, 900#, 1500# or 2500# ANSI threaded, socketweld, slip-on RF flanges, weldneck RF flanges, weldneck RTJ flanges Side-side, side-bottom Up to 5000 psi (345 bar) Up to +750° F (+399° C)
See bulletin 57-101 for Eclipse transmitter and probe part numbers. Measuring range is last three digits of chamber model number. See bulletin 50-125 for Kotron probe part numbers. See bulletin 45-115 for top mounted displacer switch part numbers and allowable high level dimension with respect to face of mounting flange. Must be used in 3" flanged cage. Maximum pressure rating of cage with 2500# flanges is 5000 psi @ 100° F (345 bar @ 38° C).
MODEL
MOUNTING
S F
NUMBER
Sealed external chamber (NPT sensor connection) Flanged top external chamber
NOMINAL CHAMBER DIAMETER
2 3
Displacer switches require 3" cage.
2 inch If sealed chamber, 3⁄4" NPT sensor connection 3 inch If sealed chamber, 2" NPT sensor connection
If flanged chamber, flanged sensor connection same size as chamber If flanged chamber, flanged sensor connection same size as chamber
DESIGN STANDARD
1 3 4 5 7 Commercial Construction ASME B31.1 Certified ASME B31.3 Certified
Level switch/transmitter must also be specified to required code, if applicable. ASME B31.1, 5000 psi chambers not available in carbon steel.
Commercial Construction and NACE certified ASME B31.3 Certified and NACE certified
4
MODEL
NUMBER
CONTINUED
MATERIALS OF CONSTRUCTION
1 4
Process connection materials will match chamber materials
Carbon Steel, measuring range in inches 316/316L Stainless Steel, measuring range in inches
CHAMBER RATING 11
A B C D E F 150# ANSI class 300# ANSI class 600# ANSI class 900# ANSI class 1500# ANSI class 5000 psi (process flanges will be 2500# ANSI)
1 1
Process flange, if applicable, will match chamber rating, except as indicated
PROCESS CONNECTION SIZE
1 2 3 4 ⁄4" 1" 11⁄2" 2"
3
PROCESS CONNECTION TYPE AND CONFIGURATION 12
A B D E F G H K L M Side/Side Configurations NPT SW Slip-on RF Flange 14 Weldneck RF Flange Chamber rating codes A, B & C only Weldneck RJ Flange Chamber rating codes C, D, E & F only Side/Bottom Configurations NPT SW Slip-on RF Flange 14 Weldneck RF Flange Chamber rating codes A, B & C only Weldneck RJ Flange Chamber rating codes C, D, E & F only
12 13 14
Head Flange Type Slip-on or weldneck 13 Weldneck
Slip-on or weldneck 13
Weldneck
Process connection materials will match chamber materials See page 3 to determine type of head flange Cannot use slip-on flanges on 2" or 3", 5000 psi for B31.3, nor on 2" or 3", ≥600# for B31.1
MEASURING RANGE
12 to 240 inches Example: 12 inches = 012
5
DIMENSIONAL
SLIP-ON FLANGED
SPECIFICATIONS
CHAMBER DESIGN
COMMERCIAL CONSTRUCTION, 2" CHAMBER (Models F21 and F25)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 900# 1500# 5000 psi
B All 7.32 7.50 7.32 7.50 7.32 7.50
C All 7.32 9.50 7.32 8.12 9.75 7.00 5.87 6.00 6.12 6.00 150# 300# 2.03 2.18 2.22 5.26 2.31 2.28 2.10 5.07 5.87 6.00 6.50 7.00 600#
D 900# 2.31 2.56 2.63 5.26 2.31 2.56 2.63 5.07 7.25 7.37 8.00 8.50 1500# 5000 psi 2.31 2.81 2.94 5.26 2.31 2.81 2.94 5.07 7.87 8.12 9.75 10.50
NPT
6.00
6.50
8.50
SW
⁄4" 1" 11⁄2" 2"
3
6.00
6.50
8.50
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
6.00
6.50
8.50
COMMERCIAL CONSTRUCTION, 3" CHAMBER (Models F31 and F35)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 900# 1500# 5000 psi
B All
C All 150# 300# 2.69 2.87 2.94 2.88 2.97 3.00 3.00 3.10 6.75 6.81 7.00 7.13 600#
D 900# 2.87 3.12 3.19 3.31 2.87 3.12 3.19 3.31 3.87 1500# 5000 psi 2.87 3.37 3.50 3.87 2.87 3.37 3.50 3.87
NPT
6.00
6.50
8.50
7.32
7.50
SW
⁄4" 1" 11⁄2" 2"
3
6.00
6.50
8.50
7.32
7.50
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
6.00
6.50
8.50
7.32
9.75
6.25
6.75
8.00
A
A
A
Measuring Range
Measuring Range
Measuring Range
C D
C
B
D
1" NPT drain
D
Slip-on flanged chamber with side/bottom flanged connections
Slip-on flanged chamber with side/bottom NPT or SW connections
Slip-on flanged chamber with side/side connections
6
DIMENSIONAL
SLIP-ON FLANGED
SPECIFICATIONS
CHAMBER DESIGN
ANSI B31.3 CONSTRUCTION, 2" CHAMBERS (150 thru 1500# only – Models F24 and F27)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 900# 1500#
B All 8.00 8.18 8.00 8.18 8.00 8.18
C All 8.00 9.50 8.00 8.12 10.50 7.00 150# 300# 2.31 2.56 2.63 5.26 2.31 2.56 2.63 5.07
D 600# 900# 1500# 2.69 2.81 2.94 5.26 2.69 2.81 2.94 5.07
NPT
6.00
6.50
SW
⁄4" 1" 11⁄2" 2"
3
6.00
6.50
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
6.00
6.50
5.00
5.25
5.75
ANSI B31.3 CONSTRUCTION, 3" CHAMBERS (150 thru 900# only – Models F34 and F37)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 900#
B All
C All 150# 300#
D 600# 2.87 3.12 3.19 3.31 900#
NPT/SW
6.00
8.00
8.18
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
6.00
8.00
10.50
5.50
6.00
6.25
ANSI B31.1 CONSTRUCTION, 2" CHAMBERS (150 and 300# only – Model F23)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All 8.00 8.18 8.00 8.18 8.00 8.18
C All 8.00 9.50 8.00 8.12 10.50 7.00 150#
D 300# 2.31 2.56 2.63 5.26 2.31 2.56 2.63 5.07
NPT
6.00
SW
⁄4" 1" 11⁄2" 2"
3
6.00
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
6.00
5.00
5.25
ANSI B31.1 CONSTRUCTION, 3" CHAMBERS (150 and 300# only – Model F33)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All
C All 150#
D 300# 2.87 3.12 3.19 3.31 2.87 3.12 3.19 3.31
NPT
6.00
8.00
8.00
SW
⁄4" 1" 11⁄2" 2"
3
6.00
8.00
8.00
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
6.00
8.00
10.50
5.50
6.00
7
DIMENSIONAL
WELDNECK FLANGED
SPECIFICATIONS
CHAMBER DESIGN
COMMERCIAL CONSTRUCTION, 2" CHAMBER (Models F21 and F25)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 6.00 7.50 6.50 600# 900# 1500# 6.50 6.50 5000 psi 8.50 9.50 7.50 150# 300# 600#
B 900# 7.32 8.50 7.50 1500# 5000 psi
Weldneck Flg
Process Connection
Conn. Size ⁄4" 1" 11⁄2" 2"
3
C 150# 12.50 9.18 9.56 300# 600# 13.00 10.68 900# 1500# 5000 psi 13.50 11.68 150# 5.69 5.75 5.81 5.06 300# 5.88 6.00 6.06 5.31 600# 5.88 6.00 6.12 5.44
D 900# 4.94 5.25 5.81 6.56 1500# 5000 psi 5.31 6.31 7.69 7.56
Weldneck Flg
COMMERCIAL CONSTRUCTION, 3" CHAMBER (Models F31 and F35)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 6.00 6.00 7.00 600# 900# 1500# 6.50 7.50 7.50 5000 psi 8.50 9.50 9.50 150# 300# 600#
B 900# 1500# 5000 psi
Weldneck Flg
7.32
Process Connection
Conn. Size ⁄4" 1" 11⁄2" 2"
3
C 150# 300# 600# 900# 1500# 5000 psi 150# 6.56 6.56 6.69 6.76 300# 6.75 6.81 6.94 7.01 600# 6.75 6.81 7.00 7.14
D 900# 5.50 5.81 6.37 7.37 1500# 5.50 5.81 6.37 8.05 5000 psi 5.87 6.87 8.25 9.05
Weldneck Flg
12.50
13.00
13.50
A
A
A
Measuring Range
Measuring Range
Measuring Range
C
C
B
D
D
1" NPT drain
D
Weldneck flanged chamber with side/bottom flanged connections
Weldneck flanged chamber with side/bottom NPT or SW connections
Weldneck flanged chamber with side/side connections
8
DIMENSIONAL
WELDNECK FLANGED
SPECIFICATIONS
CHAMBER DESIGN
ASME B31.3 CONSTRUCTION, 2" CHAMBER (Models F24 and F27)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 900# 1500# 5000 psi 8.50 9.50 8.50 9.50 6.00 7.50 6.50 6.50 6.50 8.50 9.50 150# 300# 600#
B 900# 1500# 5000 psi 8.00 8.18 8.00 8.18 8.00 8.18 8.00 8.18
NPT
n/a
n/a
SW
⁄4" 1" 11⁄2" 2"
3
n/a
n/a
Weldneck Flg
⁄4" 1" 11⁄2" 2"
3
Process Connection
Conn. Size ⁄4" 1" 11⁄2" 2"
3
C 150# 300# 600# 900# 1500# 5000 psi 8.00 8.50 8.00 7.12 12.50 9.18 13.00 9.56 13.50 10.68 14.50 11.68 4.25 4.56 5.00 5.06 4.44 4.81 5.25 5.31 4.44 4.81 5.31 5.44 150# 300# 600#
D 900# 1500# 5000 psi 2.69 2.81 2.94 5.26 2.69 2.81 2.94 5.07 4.94 5.25 5.81 6.56 5.31/4.94 5.69/5.25 6.56 6.56 5.68 6.31 7.69 7.56
NPT
n/a
n/a
SW
⁄4" 1" 11⁄2" 2"
3
n/a
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
ASME B31.3 CONSTRUCTION, 3" CHAMBER (Models F34 and F37)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 900# 1500# 6.50 n/a 7.50 6.50 n/a 7.50 6.50 7.00 7.50 8.50 n/a n/a 9.50 5000 psi 8.50 n/a 150# 300# 600#
B 900# 1500# 5000 psi
NPT/SW
n/a
8.00
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
8.00
n/a
Weldneck Flg
⁄4" 1" 11⁄2" 2"
3
6.00 6.00
8.00 9.50
Process Connection
Conn. Size ⁄4" 1" 11⁄2" 2"
3
C 150# 300# 600# 900# 1500# 5000 psi 150# 300# 600#
D 900# 1500# 2.87 3.12 3.50 3.87 5000 psi 3.25 3.37 3.50 3.87
NPT/SW
n/a
8.00
n/a
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
n/a
10.50
n/a
n/a
6.75
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
12.50
13.00
13.50
14.50
4.81 5.12 5.56 5.87
5.00 5.37 5.81 6.12
5.00 4.37 5.87 6.25
5.50 5.81 6.37 8.05/7.37
5.87/5.50 6.25/5.88 7.12 8.05
6.24 6.87 8.25 9.05
9
DIMENSIONAL
WELDNECK FLANGED
SPECIFICATIONS
CHAMBER DESIGN
ASME B31.1 CONSTRUCTION, 2" CHAMBER (Model F23)
Process Connection NPT (cs/ss) Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 6.00 7.50 6.00 7.50 6.00 6.00/7.50 7.50 6.50 6.50 6.50 6.50 6.50 900# 1500#
5000 psi 8.50 9.50 8.50 9.50 8.50 9.50
B 150# 300# 600# 900# 1500#
5000 psi
n/a
6.50
n/a
8.00 8.18 8.00 8.18 8.00 8.18
SW (cs/ss)
⁄4" 1" 11⁄2" 2"
3
n/a
6.50
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
Process Connection NPT (cs/ss)
Conn. Size ⁄4" 1" 11⁄2" 2"
3
C 150# 300# 600# 900# 8.00 9.50 8.00 8.12 12.50 9.18 13.00 9.56 13.50 10.68 1500#
5000 psi 8.00 8.50 8.00 7.12 14.50 11.68
D 150# 300# 600# 2.31 2.56 2.63 5.26 2.31 2.56 2.63 5.07 4.44 4.81 5.25 5.31 4.44 4.81 5.31 5.44 4.94 5.25 5.81 6.56 900# 1500# 2.69/2.31 2.81/2.56 2.94 5.26 2.69/2.31 2.81/2.56 2.94 5.07 5.31/4.94 5.69/5.25 6.56 6.56
5000 psi 2.69 2.81 2.94 5.26 2.69 2.81 2.94 5.07 5.68 6.31 7.69 7.56
n/a
n/a
SW (cs/ss)
⁄4" 1" 11⁄2" 2"
3
n/a
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
4.25 4.56 5.00 5.06
Available in stainless steel construction only.
10
DIMENSIONAL
WELDNECK FLANGED
SPECIFICATIONS
CHAMBER DESIGN
ASME B31.1 CONSTRUCTION, 3" CHAMBER (Model F33)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A 150# 300# 600# 6.00 7.00 6.00 7.00 6.00 7.00 900# 1500# 6.50 7.50 6.50 7.50 6.50 7.50
5000 psi 8.50
B 150# 300# 600# 900# 1500#
5000 psi
NPT
n/a
n/a 9.50 8.50 n/a 9.50 8.50 8.00 9.50
8.00
SW
⁄4" 1" 11⁄2" 2"
3
n/a
8.00
Weldneck Flg
⁄4" 1" 11⁄2" 2"
3
6.00
Process Connection
Conn. Size ⁄4" 1" 11⁄2" 2"
3
C 150# 300# 600# 900# 1500#
5000 psi
D 150# 300# 600# 2.87 3.12 3.19 3.31 2.87 3.12 3.19 3.31 5.00 5.37 5.81 6.12 5.00 5.37 5.87 6.25 900# 2.87 3.12 3.19 3.31 2.87 3.12 3.19 3.87 5.50 5.81 6.37 8.05/7.37 1500#
5000 psi 3.25 3.37 3.50 3.87 3.25 3.37 3.50 3.87
NPT
n/a 8.00 n/a
n/a
n/a
SW
⁄4" 1" 11⁄2" 2"
3
n/a
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
12.50
13.00
13.50
14.50
4.81 5.12 5.56 5.87
5.87/5.50 6.25/5.88 7.12 8.05
6.24 6.87 8.25 9.05
Available in stainless steel construction only.
A
A
A
Measuring Range
Measuring Range
Measuring Range
C
C
B
D
D
1" NPT drain
D
Weldneck flanged chamber with side/bottom flanged connections
Weldneck flanged chamber with side/bottom NPT or SW connections
Weldneck flanged chamber with side/side connections
11
DIMENSIONAL
SEALED CHAMBER
SPECIFICATIONS
DESIGN
COMMERCIAL CONSTRUCTION, 2" CHAMBER (Models S21 and S25)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All 150# 300# 600#
C 900# 7.50 9.50 7.50 8.12 9.93 7.00 12.68 9.18 9.43 13.18 9.56 10.68 13.68 11.68 5.69 5.75 5.81 5.06 5.88 6.00 6.12 6.00 5.88 6.00 6.06 5.31 1500# 5000 psi 150# 300# 2.03 2.18 2.22 5.26 2.31 2.28 2.10 5.07 5.88 6.00 6.50 7.00 5.88 6.00 6.12 5.44 600#
D 900# 2.31 2.56 2.63 5.26 2.31 2.56 2.63 5.07 7.25 7.37 8.00 8.50 4.94 5.25 5.81 6.56 1500# 5000 psi 2.31 2.81 2.94 5.26 2.31 2.81 2.94 5.07 7.87 8.12 9.75 10.50 5.31 6.31 7.69 7.56
NPT
7.00
7.50
SW
⁄4" 1" 11⁄2" 2"
3
7.00
7.50
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
7.00
7.50
Weldneck Flg
⁄4" 1" 11⁄2" 2"
3
7.00
7.50
COMMERCIAL CONSTRUCTION, 3" CHAMBER (Models S31 and S35)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All 150# 300# 600#
C 900# 1500# 5000 psi 150# 300# 2.69 2.87 2.94 2.88 2.97 3.00 3.00 3.10 6.75 6.81 7.00 7.13 6.56 6.56 6.69 6.75 6.75 6.81 6.94 7.00 6.75 6.81 7.00 7.13 600#
D 900# 2.87 3.12 3.19 3.31 2.87 3.12 3.19 3.87 1500# 5000 psi 2.87 3.37 3.50 3.87 2.87 3.37 3.50 3.87
NPT
7.00
7.50
7.50
SW
⁄4" 1" 11⁄2" 2"
3
7.00
7.50
7.50
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
7.00
7.50
9.93
6.25
6.75
8.00
Weldneck Flg
⁄4" 1" 11⁄2" 2"
3
7.00
7.50
12.68
13.18
13.68
5.50 5.81 6.37 7.37
5.50 5.81 6.37 8.05
5.87 6.87 8.25 9.05
12
DIMENSIONAL
SEALED CHAMBER
SPECIFICATIONS
DESIGN
ASME B31.3 CONSTRUCTION, 2" CHAMBER (Models S24 and S27)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All 150# 300# 600#
C 900# 8.18 9.50 1500# 5000 psi 150# 300# 2.31 2.56 2.63 5.26 2.31 2.56 2.63 5.07 600#
D 900# 1500# 5000 psi
NPT
7.68
8.18
2.69 2.81 2.94 5.26 2.69 2.81 2.94 5.07
SW
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
8.18
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
9.93 7.00 12.68 9.18 9.43 13.18 9.56 13.68 10.68
n/a
5.00
5.25
5.75
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
14.68 11.68
4.25 4.56 5.00 5.06
4.44 4.81 5.25 5.31
4.44 4.81 5.31 5.44
4.94 5.25 5.81 6.56
5.31/4.94 5.69/5.25 6.56 6.56
5.68 6.31 7.69 7.56
ASME B31.3 CONSTRUCTION, 3" CHAMBER (Models S34 and S37)
Process Connection Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All 150# 300# 600#
C 900# 1500# 5000 psi 150# 300# 2.87 3.12 3.19 3.31 2.87 3.12 3.19 3.31 600#
D 900# 1500# 2.87 3.12 3.50 3.87 2.87 3.12 3.50 3.87 5000 psi 2.87 3.37 3.50 3.87 2.87 3.37 3.50 3.87
NPT
7.68
8.18
8.18
SW
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
8.18
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
10.68
n/a
5.50
6.00
6.25
6.75
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
12.68
13.18
13.68
14.68
4.81 5.12 5.56 5.87
5.00 5.37 5.81 6.12
5.00 5.37 5.87 6.25
5.50 5.87/5.50 5.81 6.25/5.88 6.37 7.12 8.05/7.37 8.05
6.24 6.87 8.25 9.05
A
A
A
Measuring Range
Measuring Range
Measuring Range
C
C 1" NPT drain D
B
D
D
Sealed chamber with side/bottom flanged connections
Sealed chamber with side/bottom NPT or SW connections
Sealed chamber with side/side connections
13
DIMENSIONAL
SEALED CHAMBER
SPECIFICATIONS
DESIGN
ASME B31.1 CONSTRUCTION, 2" CHAMBER (Model S23)
Process Connection NPT (cs/ss) Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All 150# 300# 600#
C 900# 8.18 9.50 1500#
5000 psi
D 150# 300# 2.31 2.56 2.63 5.26 2.31 2.56 2.63 5.07 600# 900#
1500# 5000 psi 2.69/2.31 2.81/2.56 2.94 5.26 2.69/2.31 2.81/2.56 2.94 5.07 2.69 2.81 2.94 5.26 2.69 2.81 2.94 5.07
7.68
8.18
SW (cs/ss)
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
8.18
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
9.93 7.00 12.68 9.18 9.43 13.18 9.56
n/a
5.00
5.25
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
13.68 10.68
4.25 4.56 5.00 5.06
4.44 4.81 5.25 5.31
4.44 4.81 5.31 5.44
4.94 5.25 5.81 6.56
5.31/4.94 5.69/5.25 6.56 6.56
5.68 6.31 7.69 7.56
ASME B31.1 CONSTRUCTION, 3" CHAMBER (Model S33)
Process Connection NPT (cs/ss) Conn. Size ⁄4" 1" 11⁄2" 2"
3
A All
B All 150# 300# 600#
C 900# 1500#
5000 psi
D 150# 300# 2.87 3.12 3.19 3.31 2.87 3.12 3.19 3.31 600# 900# 2.87 3.12 3.19 3.31
1500# 5000 psi 3.25/2.87 3.37/3.12 3.50 3.87 3.25 3.37 3.50 3.87 3.25 3.37 3.50 3.87
7.68
8.18
8.18
SW (cs/ss)
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
8.18
2.87 3.25/2.87 3.12 3.37/3.12 3.19 3.50 3.87/3.31 3.87
Slip-on Flg
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
10.68
n/a
5.50
6.00
n/a
Weldneck Flg (cs/ss)
⁄4" 1" 11⁄2" 2"
3
7.68
8.18
12.68
13.18
13.68
14.68
4.81 5.12 5.56 5.87
5.00 5.37 5.81 6.12
5.00 5.37 5.87 6.25
5.50 5.87/5.50 5.81 6.25/5.88 6.37 7.12 8.05/7.37 8.05
6.24 6.87 8.25 9.05
Available in stainless steel construction only.
A
A
A
Measuring Range
Measuring Range
Measuring Range
C
C
B
D
D
1" NPT drain
D
Sealed chamber with side/bottom flanged connections
Sealed chamber with side/bottom NPT or SW connections
Sealed chamber with side/side connections
14
Warranty All Magnetrol mechanical level equipment is warranted free of defects in materials or workmanship for five full years from the date of original factory shipment. If returned within the warranty period; and, upon factory inspection of the equipment, the cause of the claim is determined to be covered under the warranty; then, Magnetrol will repair or replace the equipment at no cost to the purchaser (or owner) other than transportation. Magnetrol shall not be liable for misapplication, labor claims, direct or consequential damage or expense arising from the installation or use of equipment. There are no other warranties expressed or implied, except special written warranties covering some Magnetrol products. Service Policy Owners of Magnetrol controls may request the return of a control or any part of a control for complete rebuilding or replacement. They will be rebuilt or replaced promptly. Controls returned under our service policy must be returned by Prepaid transportation. Magnetrol will repair or replace the control at no cost to the purchaser (or owner) other than transportation if: 1. Returned within the warranty period; and 2. The factory inspection finds the cause of the claim to be covered under the warranty. If the trouble is the result of conditions beyond our control; or, is NOT covered by the warranty, there will be charges for labor and the parts required to rebuild or replace the equipment. In some cases it may be expedient to ship replacement parts; or, in extreme cases a complete new control, to replace the original equipment before it is returned. If this is desired, notify the factory of both the model and serial numbers of the control to be replaced. In such cases, credit for the materials returned will be determined on the basis of the applicability of our warranty. No claims for misapplication, labor, direct or consequential damage will be allowed. Low Voltage Directive For use in Category II installations. If equipment is used in a manner not specified by manufacturer, protection provided by equipment may be impaired.
Quality Assurance The quality assurance system in place at Magnetrol guarantees the highest level of quality throughout the company. Magnetrol is committed to providing full customer satisfaction both in quality products and quality service. Magnetrol’s quality assurance system is registered to ISO 9001 affirming its commitment to known international quality standards providing the strongest assurance of product/service quality available. Return Material Procedure So that we may efficiently process any materials that are returned, it is essential that a “Return Material Authorization” (RMA) number be obtained from the factory, prior to the material's return. This is available through Magnetrol’s local representative or by contacting the factory. Please supply the following information: 1. 2. 3. 4. 5. Company Name Description of Material Serial Number Reason for Return Application
Any unit that was used in a process must be properly cleaned in accordance with OSHA standards, before it is returned to the factory. A Material Safety Data Sheet (MSDS) must accompany material that was used in any media. All shipments returned to the factory must be by prepaid transportation. All replacements will be shipped F.O.B. factory. Notice of Trademark, Copyright, and Limitations Eclipse and Kotron are tradenames of Magnetrol International, Incorporated. © 2009 Magnetrol International, Incorporated. All rights reserved. Magnetrol reserves the right to make changes to the product described in this manual at any time without notice. Magnetrol makes no warranty with respect to the accuracy of the information in this manual.
5300 Belmont Road • Downers Grove, Illinois 60515-4499 • 630-969-4000 • Fax 630-969-9489 • www.magnetrol.com 145 Jardin Drive, Units 1 & 2 • Concord, Ontario Canada L4K 1X7 • 905-738-9600 • Fax 905-738-1306 Heikensstraat 6 • B 9240 Zele, Belgium • 052 45.11.11 • Fax 052 45.09.93 Regent Business Ctr., Jubilee Rd. • Burgess Hill, Sussex RH15 9TL U.K. • 01444-871313 • Fax 01444-871317
Copyright © 2009 Magnetrol International, Incorporated. All rights reserved. Printed in the USA.
Performance specifications are effective with date of issue and are subject to change without notice.
BULLETIN: 41-640.2 EFFECTIVE: July 2003 SUPERSEDES: October 2001
工商网监
湘ICP备2023018690号
