TB62706BFG

DISCONTINUED MAR 2009 TB62706BNG/BFG TOSHIBA Bi- CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB62706BNG, TB62706BFG 16BIT SHIFT REGISTER, LATCHES & CONSTANT CURRENT DRIVERS The TB62706BNG, TB62706BFG are specifically designed for LED and LED DISPLAY constant current drivers. This constant current output circuits are able to set up external resistor (IOUT = 5~90 mA). (Note) These devices are monolithic integrated circuit designed to be used together with Bi- CMOS process. The devices consist of 16bit shift register, latch, AND- GATE and Constant Current Drivers. These products are Pb free. TB62706BNG FEATURES l Constant Current Output : Can set up all output current with one resister for 5 to 90 mA. TB62706BFG l Maximum Clock Frequency : fCLK = 15 (MHz) (Cascade Connected Operate, Topr = 25°C) l 5 V C- MOS Compatible Input l Package : SDIP24- P- 300- 1.78 (TB62706BNG) SSOP24- P- 300- 1.00B OUTPUT- GND VOLTAGE =0.4 V =0.7 V CURRENT MATCHING ±6.0% ±6.0% (TB62706BFG) OUTPUT CURRENT 5~40 mA 5~90 mA l Constant Output Current Matching: Weight SDIP24-P-300-1.78 : 1.22 g (typ.) SSOP24-P-300-1.00B : 0.32 g (typ.) PIN CONNECTION (Top view) Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@arktechopto.com TB62706BNG/BFG BLOCK DIAGRAM TIMING DIAGRAM Note: Latches are level sensitive, not rising edges sensitive and not syncronus CLOCK. Input of LATCH- terminal to H Level, data passes latches, and input to L level, data hold latches. Input of ENABLE- terminal to H level, all output (OUT0~15) do off. 2 2004-06-24 TB62706BNG/BFG TERMINAL DISCRIPTION PIN No. 1 2 3 4 5~20 21 22 23 24 PIN NAME GND SERIAL- IN CLOCK LATCH OUT0 ~ 15 ENABLE FUNCTION GND terminal for control logic. Input terminal of a serial- data for shift- register. Input terminal of a clock for data shift to up- edge. Input terminal of a data strobe. Latches passes data with “H” level input of LATCH - terminal, and hold data with "L" level input. Output terminals. Input terminal of output enable. All outputs (OUT0~15) do off with “H” level input of ENABLE - terminal, and do on with "L" level input. Output terminal of a serial- data for next SERIAL- IN terminal. Input terminal of connects with a resister for to set up all output current. 5 V Supply voltage terminal. SERIAL- OUT R- EXT VDD TRUTH TABLE CLOCK UP UP UP DOWN DOWN LATCH ENABLE SERIAL- IN Dn Dn+1 Dn+2 Dn+3 Dn+3 OUT0 ··· OUT7 ··· OUT15 SERIAL- OUT Dn- 15 Dn- 14 Dn- 13 Dn- 13 Dn- 13 H L H X X L L L L H Dn ··· Dn- 7 ··· Dn- 15 No change Dn+2 ··· Dn- 5 ··· Dn- 13 Dn+2 ··· Dn- 5 ··· Dn- 13 Off Note: OUT0 ~ 15 = on in case of Dn = H level and OUT0 ~ 15 = off in case of Dn = L level. A resistor is connected with R- EXT and GND accompanied with outside, and it is necessary that a correct power supply voltage is supplied. EQUIVALENT CIRCUIT OF INPUTS AND OUTPUTS 1. ENABLE terminal 2. LATCH terminal 3. CLOCK, SERIAL- IN terminal 4. SERIAL- OUT terminal 3 2004-06-24 TB62706BNG/BFG MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC Supply Voltage Input Voltage Output Current Output Voltage Clock Frequency GND Terminal Current Power Dissipation SYMBOL VDD VIN IOUT VOUT fCK IGND PD RATING 0~7.0 - 0.4~VDD + 0.4 90 - 0.5~17.0 15 1440 1.78 (BNG- type : ON PCB, Ta = 25°C ) 1.00 (BFG- type : ON PCB, Ta = 25°C ) BNG : 70 (BN- type : ON PCB) BFG : 120 (BF- type : ON PCB) - 40~85 - 55~150 °C °C °C / W UNIT V V mA V MHz mA W Tharmal Resistance Operating Temperature Storage Temperature Rth (j- a) Topr Tstg Note: BN- type :Ambient temperature delated above 25°C in the proportion of 14.2 mW / °C BF- type : Ambient temperature delated above 25°C in the proportion of 8.3 mW / °C RECOMMENDED OPERATING CONDITION (Ta = - 40~85°C unless otherwise noted) CHARACTERISTIC Supply Voltage Output Voltage SYMBOL VDD VOUT IO Output Current IOH IOL VIH Input Voltage VIL LATCH Pulse Width t w LAT CONDITION – – OUTn, DC 1 circuit SERIAL- OUT SERIAL- OUT – – MIN 4.5 – 5 – – 0.7 VDD - 0.3 100 50 4500 TYP. 5.0 – – – – – – – – – – – – – – – – MAX 5.5 15.0 88 1.0 - 1.0 VDD +0.3 0.3 VDD – – – – – – – 10.0 0.92 0.50 UNIT V V mA V ns ns ns ns ns ns ns MHz W CLOCK Pulse Width ENABLE Pulse Width tw CLK t w EN Set- Up Time for DATA Hold Time for DATA Set- Up Time for LATCH Hold Time for LATCH Clock Frequency Power Dissipation tsetup (D) thold (D) tsetup (L) thold (L) fCLK PD VDD = 4.5~5.5 V 60 20 100 60 Cascade operation Ta = 85°C (BNG- type) Ta = 85°C (BFG- type) – – – 4 2004-06-24 TB62706BNG/BFG ELECTRICAL CHARACTERISTICS (VDD = 5.0 V, Ta = 25°C unless otherwise noted) CHARACTERISTIC "H" Level Input Voltage "L" Level Output Leakage Current Output Voltage SERIAL- OUT VIL IOH VOL VOH IOL1 Output Current 1 IOL2 Current Skew ∆ IOL1 IOL3 IOL4 Current Skew Supply Voltage Regulation Pull- Up Resistor Pull- Down Resistor ∆ IOL2 % / VDD RIN (up) RIN (down) IDD (off) 1 "OFF" Supply Current IDD (off) 2 IDD (off) 3 "ON" IDD (on) 1 IDD (on) 2 – – – – – – – – – – – – – VCE = 0.4 V IO = 40 mA, VCE = 0.4 V VCE = 1.0 V VCE = 0.7 V IO = 75 mA, VCE = 0.7 V REXT = 470 Ω, Ta = - 40~85°C – – REXT = Open, OUT0 ~ 15 = off REXT = 470 Ω, OUT0 ~ 15 = off REXT = 250 Ω, OUT0 ~ 15 = off REXT = 470 Ω, OUT0 ~ 15 = on REXT = 250 Ω, OUT0 ~ 15 = on – – – – – Ta = - 40~85°C VOH = 15.0 V IOL = 1.0 mA IOH = - 1.0 mA VCE = 0.7 V REXT = 470 Ω (Include current matching) REXT = 470 Ω REXT = 250 Ω (Include current matching) REXT = 250 Ω SYMBOL VIH TEST CIRCUIT – CONDITION Ta = - 40~85°C MIN 0.7 VDD GND – – 4.6 34.1 33.7 – 64.2 63.8 – – 150 100 – 3.5 6.5 10.0 18.0 TYP. – – – – – 40.0 39.5 ±1.5 75.5 75.0 ±1.5 1.5 300 200 0.6 5.8 10.7 16.0 28.3 MAX VDD V 0.3 VDD 10 0.4 – 45.9 mA 45.3 ±6.0 86.8 mA 86.2 ±6.0 5.0 600 400 1.2 8.0 15.0 22.0 38.5 mA % %/V Ω Ω % µA V UNIT Output Current 2 5 2004-06-24 TB62706BNG/BFG SWITCHING CHARACTERISTICS (Ta = 25°C unless otherwise noted) CHARACTERISTIC CLK- OUTn Propagation Delay Time (“L” to “H”) LATCH - OUTn ENABLE - OUTn CLK- SOUT CLK- OUTn Propagation Delay Time (“H” to “L”) LATCH - OUTn ENABLE - OUTn CLK- SOUT CLK Pulse Width LATCH L- H Set- up Time H- L L- H Hold Time H- L Maximum CLOCK Rise Time Maximum CLOCK Fall Time Output Rise Time Output Fall Time tw CLK tw LAT tsetup (L) tsetup (C) thold (L) thold (C) tr tf tor tof – – – – – – – – 150 150 0 – – 300 300 15 10 10 600 600 ns µs µs ns ns – – – tpHL – VDD = 5.0 V VCE = 0.4 V VIH = VDD VIL = GND REXT = 470 Ω VL = 3.0 V RL = 65 Ω CL = 10.5 pF – 15 – – – – – 700 30 20 10 25 25 0 1000 70 30 25 50 50 15 ns ns ns ns ns tpLH – SYMBOL TEST CIRCUIT CONDITION MIN – – – 15 – – TYP 1200 1200 1200 30 700 700 MAX 1500 1500 1500 70 1000 1000 ns ns UNIT 6 2004-06-24 TB62706BNG/BFG TEST CIRCUIT DC characteristic AC characteristic PRECAUTIONS for USING Utmost care is necessary in the design of the output line, VCC (VDD) and GND line since IC may be destroyed due to short- circuit between outputs, air contamination fault, or fault by improper grounding. 7 2004-06-24 TB62706BNG/BFG TIMING WAVEFORM 1. CLOCK- SERIAL OUT, OUTn 2. CLOCK- LATCH 3. ENABLE - OUTn 8 2004-06-24 TB62706BNG/BFG 9 2004-06-24 TB62706BNG/BFG Fig.1 10 2004-06-24 TB62706BNG/BFG LED DRIVER TB6270X SERIES APPICATION NOTE [1] [2] Output current (IOUT) IOUT is set by the enternal resistor (R- EXT) as shown in Fig.1. Total supply voltage (VLED) This device can operate 0.4~0.7V (VO). When a higher voltage is input to the device, the excess voltage is consumed inside the device, that leads to power dissipation. In order to minimize power dissipation and loss, we would like to recommend to set the total supply voltage as shown below, VLED (total supply voltage) = VCE (Tr Vsat) + Vf (LED Forward voltage) + VO (IC supply voltage) When the total supply is too high considering the power dissipation of this device, an additional R can decrease the supply voltage (VO). [3] Pattern layout This device owns only one ground pin that means signal ground pin and power ground pin are common. If ground pattern layout contains large inductance and impedance, and the voltage between ground and LATCH, CLOCK terminals exceeds 2.5 V by switching noise in operation, this device may miss- operate. So we would lile you to pay attention to pattern layout to minimize inductance. 11 2004-06-24 TB62706BNG/BFG Package Dimensions Weight: 1.22 g (typ.) 12 2004-06-24 TB62706BNG/BFG Package Dimensions Weight: 0.32 g (typ.) 13 2004-06-24 TB62706BNG/BFG About solderability, following conditions were confirmed • Solderability (1) Use of Sn-63Pb solder Bath · solder bath temperature = 230°C · dipping time = 5 seconds · the number of times = once · use of R-type flux (2) Use of Sn-3.0Ag-0.5Cu solder Bath · solder bath temperature = 245°C · dipping time = 5 seconds · the number of times = once · use of R-type flux RESTRICTIONS ON PRODUCT USE 000707EBA • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The products described in this document are subject to the foreign exchange and foreign trade laws. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. • The information contained herein is subject to change without notice. 14 2004-06-24