315-521-22

PANEL INDICATOR LEDs - Ø6.35mm Mounting FEATURES 315 SERIES Low profile lens styling Flying lead terminations and low current versions available PACK QUANTITY = 20 PIECES Sealed to IP40 Supplied complete with mounting hardware Product illustrated 315-532-21 SPECIFICATIONS Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR LENS Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE Vopr CURRENT lopr LUMINOUS lv@20mA WAVE λp OPERATING T opr STORAGE T stg DC DC INTENSITY LENGTH TEMP TEMP STANDARD INTENSITY 315-505-21 315-506-21 315-511-21 315-512-21 Red Orange Yellow Green Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 12 20 20 21 20 60 160 40 120 627 607 590 565 -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 Yes Yes Yes Yes HIGH INTENSITY 315-501-21 315-521-21 315-532-21 315-930-21 315-997-21 315-501-23 315-521-23 315-532-23 315-930-23 315-997-23 UNITS Red Yellow Green Blue Cold White Red Yellow Green Blue Cold White Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 Vdc 20 20 20 20 20 20 20 20 20 20 mA 2700 6100 11600 3460 7800 2700 6100 11600 3460 7800 mcd 660 595 525 470 *see below 660 595 525 470 *see below nm -40 ~ +85^ -40 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ -40 ~ +85^ -40 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ 0 -40 ~ +85 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +85 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 0 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes C C x y 997 0.296 0.276 *Typical emission colour cold white 0.283 0.330 0.330 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 0.305 0.360 0.318 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. shown. Refer to page 3. Appropriate LED numbers How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS077/07 Issue 1 SAMPLES AVAILABLE Page 1 of 4 315 Series 2.0 22.0 9.0 0.7Sq Ø6.35 4.2 Ø8.4 Ø6.3 MOUNTING HOLE Dimensions in mm (Typical) Not to scale Anode termination indicated by long tag. MATERIALS Body Panel Washer T ermination Pins Retaining Clip Fresnel lens Header Nylon 6 Neoprene Tin on Nickel Plated Phosphor Bronze Spring steel Polycarbonate PTFE PUSH-ON CONNECTORS 909-000-00 is gold plated 910-000-00 is tin plated for use with 315 series. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low contact. and gas tight electrical resistance Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES POWER MAXIMUM REVERSE MAXIMUM CUTOUT 6.35 mm PANEL MOUNTING MINIMUM PANEL MIN/MAX. 315 UNITS 500 DISSIPATION 3 VOLTAGE CENTRES 13.0 mm THICKNESS 9.0 mW Vdc mm OPTIONAL FLYING LEAD TERMINATIONS ORDER SUFFIX 13 13 17 17 CODE SUPPLY VOLTAGE WIRE COLOUR WIRE LENGTH NO/DIAMETER CONDUCTORS OF DIAMETER INSULATION OVER COMMENTS DC Products AC Products DC Products AC Products Red-anode / Black-cathode Brown-live / Blue-neutral Red-anode / Black-cathode Brown-live / Blue-neutral 150mm 150mm 1000mm 1000mm Customised available 7/0.2mm 1.2mm lengths PROTECTION DIODE SUFFIX 01 ORDER CODE CIRCUIT COMMENTS Available on all indicators except Bi-Colour devices and when diode test is specified. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 077/07 Issue 1 SAMPLES AVAILABLE Page 2 of 4 Diode Test Facility ORDER CODE SUFFIX 03 05 09 04 TERMINATION CIRCUIT COMMENTS 3 PINS 150mm of flying leads colours as shown 1000mm of flying leads colours as shown 3 PINS TEST POSITIVE Not available LED with Bi-colour 06 10 150mm of flying leads colours as shown 1000mm of flying leads colours as shown TEST NEGATIVE Test Positive Cathode Test Negative Cathode Anode Anode T est Identification Mark T est Identification Mark De-rating Information 505, 511, 532, 930 & 997 512 & 506 521 501 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 077/07 Issue 1 SAMPLES AVAILABLE Page 3 of 4 ALSO AVAILABLE Part numbers also available in the 315 Series: PART NO. COLOUR VOLTAGE (Vdc) Vopr PART NO. COLOUR VOLTAGE (Vdc) Vopr 315-501-04 315-501-20-13 315-501-22 315-501-71 315-501-72 315-501-73 315-501-79 315-502-22 315-502-72 315-502-75 315-503-20-50 315-503-21 315-503-22 315-503-22-02 315-505-04 315-505-22 315-505-22-03 315-505-72 315-506-22 315-509-24-03 315-509-25 315-511-04 315-511-22 315-511-72 UNITS Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Orange Yellow Yellow Yellow Yellow Yellow 20mA 5/6Vdc 24Vdc 12Vac 24Vac 28Vac 30Vac 24Vdc 24Vac 110Vac 5/6Vdc 12Vdc 24Vdc 24Vdc 20mA 24Vdc 24Vdc 24Vac 24Vdc 48Vdc 110Vdc 20mA 24Vdc 24Vac 315-512-04 315-512-20 315-512-22 315-512-22-03 315-512-72 315-512-75 315-512-76-15 315-512-76-19 315-521-04 315-521-22 315-521-71 315-532-04 315-532-20-13 315-532-22 315-532-72 315-930-04 315-930-22 315-930-25 315-997-04 315-997-21-50 315-997-22 315-997-72 315-997-73 315-997-79 UNITS Green Green Green Green Green Green Green Green Yellow Yellow Yellow Green Green Green Green Blue Blue Blue White White White White White White 20mA 5/6Vdc 24Vdc 24Vdc 24Vac 110Vac 230Vac 230Vac 20mA 24Vdc 12Vac 20mA 5/6Vdc 24Vdc 24Vac 20mA 24Vdc 110Vdc 20mA 12Vdc 24Vdc 24Vac 28Vac 30Vac The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 077/07 Issue 1 SAMPLES AVAILABLE Page 4 of 4