411-532-22-03

PANEL INDICATOR LEDs - Ø8.0mm Mounting FEATURES PACK QUANTITY = 20 PIECES 411 SERIES Front panel replaceability Must be used in conjunction with 907-000-00 panel socket. See datasheet DS084/04 Domed fresnel lens for wide angle viewing Sealed to IP40 Product illustrated 411-532-22 in the 907-000-00 panel mounting socket SPECIFICATIONS Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR LENS Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE Vopr CURRENT lopr LUMINOUS lv@20mA WAVE λp OPERATING T opr STORAGE T stg DC DC INTENSITY LENGTH TEMP TEMP HIGH INTENSITY 411-501-21 411-521-21 411-532-21 411-930-21 411-997-21 411-501-23 411-521-23 411-532-23 411-930-23 411-997-23 UNITS 997F-C *Typical emission colour cold white 0.361 0.356 0.264 Red Yellow Green Blue Cold White Red Yellow Green Blue Cold White Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 Vdc 20 20 20 20 20 17.5 17.5 17.5 17.5 17.5 mA 11000 16000 23000 7000 14000 11000 16000 23000 7000 14000 mcd 643 591 527 470 *see below 643 591 527 470 *see below nm -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ 0 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 0 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes C C Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. x y 0.245 0.229 0.385 0.351 0.220 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. shown. Refer to page 3. Appropriate LED numbers How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS081/07 Issue 1 SAMPLES AVAILABLE Page 1 of 4 411 SERIES 6.9 22.0 5.1 0.7 Sq Ø8.4 Ø7.0 Ø6.3 Key Dimensions in mm (Typical) Not to scale 4.2 Key denotes cathode MATERIALS Body T ermination Pins Fresnel lens Header Rear Retainer Mounting Hardware Nylon 6 Tin on Nickel Plated Phosphor Bronze Polycarbonate Nylon 6 Spring Steel Use with socket 907-000-00. Use wth socket 908-000-00 when diode test facility is specified TECHNICAL CHARACTERISTICS SERIES POWER MAXIMUM REVERSE MAXIMUM CUTOUT 8.0 mm PANEL MOUNTING MINIMUM PANEL MIN/MAX. 411 UNITS 500 DISSIPATION 3 VOLTAGE 17.0 mm CENTRES 13.0 mm THICKNESS mW Vdc PANEL SOCKETS & CONNECTORS 909-000-00 is gold plated 910-000-00 is tin plated for use with 907 and 908 series panel sockets. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low resistance and gas tight electrical contact. Dimensions in mm (Typical) Not to scale Rear Retainer 8.0 Lens Body T ermination Washer Panel Socket MOUNTING HOLE SERIES 411 SOCKET 907 Mounting hole to be clean and burr free How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 SAMPLES AVAILABLE Page 2 of 4 Optional Reverse Protection Diode ORDER CODE SUFFIX 01 CIRCUIT COMMENTS Available on all indicators except Bi-Colour devices and when diode test is specified. Optional Diode Test Facility SUFFIX 03 09 04 05 ORDER CODE TERMINATION CIRCUIT COMMENTS 3 PIN 908-000-00 Socket 1000mm of flying leads colours as shown (attached to 908-000-00) 3 PIN 908-000-00 Socket 150mm of flying leads colours as shown (attached to 908-000-00) TEST POSITIVE Not available LED with Bi-colour 10 06 1000mm of flying leads colours as shown (attached to 908-000-00) 150mm of flying leads colours as shown (attached to 908-000-00) TEST NEGATIVE Test Positive Cathode Test Negative Cathode Anode Anode T est Identification Mark T est Identification Mark De-rating Information 501 532, 930 & 997 521 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 SAMPLES AVAILABLE Page 3 of 4 411 Series Part numbers also available in the 411 Series: PART NO. COLOUR VOLTAGE (Vdc) Vopr 411-000-22-50 411-501-04 411-501-04-03 411-501-22 411-501-22-03 411-501-22-04 411-501-24 411-501-24-03 411-501-24-04 411-501-75 411-501-75-03 411-501-76 411-503-20 411-503-20-03 411-503-21 411-503-21-04 411-503-22 411-503-22-03 411-503-22-04 411-503-22-05 411-503-22-50 411-503-22-51 411-503-23 411-503-24-03 411-503-76 411-506-20-03 411-506-22 411-506-22-03 411-506-22-04 411-506-22-51 411-506-23 411-506-75 411-506-76-15 411-509-20 411-509-21 411-509-21-50 411-509-22 UNITS Red/Yellow Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Orange Orange Orange Orange Orange Orange Orange Orange Yellow Yellow Yellow Yellow 24Vdc 20mA 20mA 24Vdc 24Vdc 24Vdc 48Vdc 48Vdc 48Vdc 110Vac 110Vac 230Vac 5/6Vdc 5/6Vdc 12Vdc 12Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24-28Vdc 48Vdc 230Vac 5/6Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24-28Vdc 110Vac 230Vac 5/6Vdc 12Vdc 12Vdc 24Vdc 411-509-22-03 411-509-22-04 411-509-22-05 411-509-22-52 411-509-23 411-512-20 411-512-21 411-512-21-04 411-512-22 411-512-22-03 411-512-22-04 411-512-22-05 411-512-22-51 411-512-24-03 411-519-22 411-519-22-03 411-519-22-50 411-521-22 411-521-22-03 411-521-22-04 411-521-24-04 411-521-76-13 411-532-04 411-532-22 411-532-22-03 411-532-22-04 411-532-24-03 411-532-76 411-532-76-13 411-532-76-15 411-930-22 411-930-22-03 411-930-22-50 411-997-22 411-997-22-03 411-997-43 411-997-76 UNITS Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Green Green Green Green Blue Blue Blue Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Green Green Green Blue Blue Blue White White White White PART NO. COLOUR VOLTAGE (Vdc) Vopr 24Vdc 24Vdc 24Vdc 24Vdc 24-28Vdc 5/6Vdc 12Vdc 12Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 48Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 48Vdc 230Vac 20mA 24Vdc 24Vdc 24Vdc 48Vdc 230Vac 230Vac 230Vac 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 18Vdc 230Vac The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 SAMPLES AVAILABLE Page 4 of 4