652-102-75

PROFESSIONAL LED INDICATORS Ø12.7mm Mounting FEATURES 652 SERIES PACK QUANTITY = 10 PIECES Each product will operate over a wide voltage input range Black anodised aluminium housing 180° viewing angle Full internal potting to resist shock and vibration Sealed to IP67 True Bi-polar product SPECIFICATIONS Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS DC (Vdc) Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH λp (nm) TEMP T opr TEMP T stg HIGH INTENSITY 652-105-63 652-102-63 652-111-63 652-114-63 652-105-75 652-102-75 652-111-75 652-114-75 UNITS Red Red (GaAlAs) Yellow Green Red Red (GaAlAs) Yellow Green Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12-28 12-28 12-28 12-28 110Vac 110Vac 110Vac 110Vac Vac/Vdc 6-16 6-16 6-16 6-16 6 6 6 6 mA 100 450 50 60 100 450 50 60 mcd 627 660 590 565 627 660 590 565 nm -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ °C -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 °C Yes Yes Yes Yes Yes Yes Yes Yes 105,102,111 & 114 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 069/07 Issue 2 SAMPLES AVAILABLE Page 1 of 2 652 Series 20mA to 48Vac/dc All other voltages Mounting Hole Dimensions in mm (Typical) Not to scale Mounting hole to be clean and burr free MATERIALS Body Nut Panel Seal T ermination Lock Washer Fresnel lens Encapsulation Header Aluminium grade 6063 black anodised Stainless Steel grade 303 Viton Copper with silver flash finish Zinc plated steel Polycarbonate PC5430 Nylon6 A82 PUSH-ON CONNECTORS 925-000-00 is brass tin plated. Dimensions in mm (Typical) Not to scale For use with 652 series lamps. TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL NUT MINIMUM MIN/MAX. DISSIPATION 652 825 mW POWER CUTOUT TORQUE 1.0 Nm MOUNTING CENTRES x,y=19.5 mm MOUNTING THICKNESS 1.5-8.0 mm PANEL 12.7 mm How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 069/07 Issue 2 SAMPLES AVAILABLE Page 2 of 2