672-294-22

PROFESSIONAL LED INDICATORS Ø25.4mm Mounting FEATURES Black anodised aluminium housing RIA 12 approved versions available Sealed to IP67 Internal reverse protection diode fitted as standard in all voltage models. Large LED indication AC Version available upon request 672 SERIES PACK QUANTITY = 1 PIECE Ordering Information & Typical Technical Characteristics (Ta = 25°C) PART NUMBER COLOUR LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr SPECIFICATION LUMINOUS WAVE INTENSITY LENGTH lv@20mA (mcd) λp (nm) OPERATING TEMP Topr STORAGE TEMP Tstg Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. STANDARD INTENSITY 672-291-22 672-290-22 Yellow Red Red Colour Diffused 24 Colour Diffused 24 19 19 20 30 200 590 625 -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85 -40 ~ +85 -40 ~ +85 Yes Yes Yes 672-292-22 672-290-75 Green Colour Diffused 24 672-292-75 672-291-75 Green Red Yellow Colour Diffused 110vac/dc 10 Colour Diffused 24 19 Colour Diffused 110vac/dc 19 Colour Diffused 110vac/dc 19 19 20 30 565 672-289-22 HIGH INTENSITY 400 19 820 890 820 890 200 565 590 625 -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 Yes Yes Yes Yes 672-293-22 672-289-75 672-295-22 672-294-22 Yellow Cool White Yellow Cool White Blue Blue Colour Diffused 24 672-293-75 Red Colour Diffused 110vac/dc 10 Colour Diffused 24 Colour Diffused 24 19 660 19 19 590 UNITS 672-295-75 672-294-75 Colour Diffused 110vac/dc 10 400 19 660 see below 468 -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ Colour Diffused 110vac/dc 10 Vdc Colour Diffused 110vac/dc 10 mA 590 -40 ~ +85^ -40 ~ +85 -40 ~ +85 -40 ~ +85 mcd see below nm 468 -40 ~ +85^ °C -40 ~ +85^ -40 ~ +85^ -40 ~ +85 Yes Yes Yes °C -40 ~ +85 -40 ~ +85 -40 ~ +85 Yes Yes Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 049/06 Issue 2 SAMPLES AVAILABLE Page 1 of 2 How to Order: shown - Refer to page 2. The -75 products will operate at 110Vac or 110DC. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a 295 *Typical emission colour cool white batch. x 0.248 0.391 0.380 0.280 y 0.286 0.436 0.381 0.284 672 Series Mounting Hole Dimensions in mm (Typical) Not to scale Anode termination indicated by colour dot. Mounting hole to be clean and burr free. MATERIALS Body Nut Panel Seal Termination Tags Lens Encapsulation Lock Washer Black Anodised Aluminium Aluminium Neoprene Tin Plated Brass Epoxy PC5430 resin Spring Washer PUSH-ON CONNECTORS 926-000-00 is brass tin plated, vinyl insulation. For use with 672 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 672 MAXIMUM POWER DISSIPATION PANEL CUTOUT 25.4 NUT MOUNTING TORQUE MINIMUM MOUNTING CENTRES MIN/MAX. PANEL THICKNESS UNITS mW 2500 Vdc mm 1.2 Nm x,y = 41.0 mm 2.0-10.0 DERATING INFORMATION 289, 290, 291, 293, 294 & 295 292 website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 049/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2