684-325-04

PROFESSIONAL LED INDICATORS Ø6.35mm Mounting FEATURES Black anodised aluminium housing 684 SERIES PACK QUANTITY = 10 PIECES Unique rear mounting indicator Sealed to IP67 Suitable for high vibration applications SPECIFICATION Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS DC (Vdc) Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH λp (nm) TEMP T opr TEMP T stg STANDARD INTENSITY 684-312-04 Green Water Clear 2.2 20 120 565 -40 ~ +85^ -40 ~ +85 Yes HIGH INTENSITY 684-301-04 684-325-04 684-324-04 684-934-04 684-998-04 UNITS Red Yellow Green Blue Cool White Water Clear Water Clear Water Clear Water Clear Water Clear 1.9 2.1 3.4 3.6 3.6 Vdc 20 20 20 20 20 mA 900 4300 7800 2300 4600 mcd 660 590 525 470 see below nm -40 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ °C -40 ~ +85 -40 ~ +120 -40 ~ +100 -40 ~ +100 -40 ~ +100 °C Yes Yes Yes Yes Yes ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 998 *Typical emission colour cool white 0.283 0.330 0.330 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. x y 0.296 0.276 0.305 0.339 0.318 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • webstore: www.leds.co.uk • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 SAMPLES AVAILABLE Page 1 of 3 684 Series MOUNTING HOLE Dimensions in mm (Typical) Not to scale Anode termination indicated by long pin. Mountng Hole to be clean and burr free. MATERIALS Body Nut Panel Seal Lens Encapsulation Lock Washer Black Anodised Aluminium Black Anodised Aluminium Nitrile Epoxy PC5430 resin Spring Steel PUSH-ON CONNECTORS 909-000-00 is gold plated 910-000-00 is tin plated For use with 684 series lamps Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM DISSIPATION POWER MAXIMUM VOLTAGE REVERSE PANEL CUTOUT NUT MOUNTING MINIMUM MOUNTING MIN/MAX. THICKNESS PANEL 684 75 3 6.35 mm 0.6 TORQUE x,y = 12.0 mm CENTRES 2.0-4.0 mm mW Vdc Nm OPTIONAL FLYING LEAD TERMINATIONS ORDER SUFFIX 15 CODE SUPPLY WIRE WIRE NO/DIAMETER CONDUCTORS OF DIAMETER INSULATION OVER COMMENTS VOLTAGE COLOUR LENGTH DC Products Red-anode / Black-cathode 150mm Customised available 19 DC Products Red-anode / Black-cathode 1000mm 19/0.15mm 1.2mm lengths website: www.marl.co.uk • email: sales@marl.co.uk • webstore: www.leds.co.uk • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 Page 2 of 3 DERATING INFORMATION 301 325 324, 934 & 998 312 website: www.marl.co.uk • email: sales@marl.co.uk • webstore: www.leds.co.uk • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 Page 3 of 3