695-930-20-15

PROFESSIONAL LED INDICATORS Ø12.7mm Mounting FEATURES Natural Anodised Aluminium Low profile styling, sunlight readable LEDs Sealed to IP67 Flying lead terminations available Suitable for high vibration applications Internal reverse protection diode fitted as standard in all voltage models. 695 SERIES PACK QUANTITY = 10 PIECES Ordering Information & Typical Technical Characteristics (Ta = 25°C) PART NUMBER COLOUR LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr SPECIFICATION LUMINOUS WAVE INTENSITY LENGTH lv@20mA (mcd) λp (nm) OPERATING TEMP Topr STORAGE TEMP Tstg Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. HIGH INTENSITY 695-521-21 695-501-21 Yellow Red Smoked Smoked Smoked 12 12 12 20 20 20 11000 16000 591 643 -40 ~ +95^ -40 ~ +95^ -40 ~ +100 -40 ~ +100 Yes Yes 695-930-21 695-501-23 695-532-21 695-997-21 Blue Red Green Cool White Smoked Smoked Smoked 12 UNITS 695-997-23 695-930-23 695-532-23 695-521-23 Cool White Blue Green Yellow Smoked Smoked Smoked Smoked 24-28 Vdc 24-28 24-28 24-28 24-28 12 20 20 7000 23000 20 20 20 20 20 mA 14000 mcd 7000 23000 16000 11000 14000 470 643 527 *see below -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 Yes Yes Yes Yes *see below -40 ~ +95^ nm °C 470 527 591 -40 ~ +95^ -40 ~ +95^ °C -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 Yes Yes Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 002/08 Issue 2 SAMPLES AVAILABLE Page 1 of 3 695 Series + On rear of header denotes anode Mounting Hole Mounting hole to be clean and burr free Dimensions in mm (Typical) Not to scale Body Nut Panel Seal MATERIALS PUSH-ON CONNECTORS Natural anodised aluminium Natural anodised aluminium Viton Brass to BS2874 CZ108 copper flash undercoat with silver flash finish Polycarbonate PC5430 resin Nylon 6 A82 925-000-00 is brass tin plated. For use with 695 series lamps. Dimensions in mm (Typical) Not to scale Termination Lock Washer Fresnel lens Header Spring Steel Encapsulation TECHNICAL CHARACTERISTICS SERIES 695 MAXIMUM POWER DISSIPATION mw MAXIMUM REVERSE VOLTAGE 1000 Vdc PANEL CUTOUT 12.7 mm NUT MOUNTING TORQUE 1.0 Nm MINIMUM MOUNTING CENTRES 19.5 mm MIN/MAX. PANEL THICKNESS mm 2.0-10.0 825 OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX 15 15 19 19 SUPPLY VOLTAGE DC Products AC Products DC Products AC Products WIRE COLOUR WIRE LENGTH NO/DIAMETER OF CONDUCTORS DIAMETER OVER INSULATION COMMENTS Red-anode / Black-cathode 150mm Brown-live / Blue-neutral 150mm 19/0.15mm 1.2mm Customised lengths available Red-anode / Black-cathode 1000mm Brown-live / Blue-neutral 1000mm website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 002/08 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 501 & 521 532, 930 & 997 PART NO. 695-501-20-15 COLOUR Red (Vdc) Vopr 5/6Vdc 24Vdc VOLTAGE DC PART NO. 695-521-72 COLOUR Yellow Green (Vdc) Vopr 24Vac 48Vac VOLTAGE DC 695-501-22-52 695-501-25-50 695-501-25-51 695-501-42 695-501-58 695-501-74 695-501-72 Red Red Red 110Vdc 695-521-74 695-501-25-52 Red 110Vdc 15Vdc 70Vdc 48Vac 24Vac 695-532-25-50 695-532-58 Yellow Green Red Red Red 110Vdc 695-532-25-52 110Vdc 70Vdc 695-509-75 695-509-22 695-521-25-50 695-521-58 695-521-22-51 695-521-25-52 695-521-58-19 Yellow Yellow Yellow Red Yellow Yellow 110Vac 110Vdc 70Vdc 24Vdc 24Vdc 695-930-25-50 695-930-76 695-930-20-15 695-906-75 695-532-58-19 695-930-52-50 Blue Blue Blue Yellow Green Green 110Vdc Blue 110Vdc 230Vac 5Vdc 5/6Vdc 110Vac 70Vdc 695-997-72 UNITS Yellow Yellow 110Vdc 70Vdc 695-997-74 White UNITS 695-997-76 White 24Vac White 48Vac 230Vac The products listed above illustrate all of the options available to order. These products may have custom contact sales for further information. modifications that alter their operation beyond the generic information contained within this datasheet. Please website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 002/08 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3