PROFESSIONAL LED INDICATORS Ø8.1mm Mounting
FEATURES
Each product will operate over a wide voltage input range
698 SERIES
PACK QUANTITY = 10 PIECES
Black anodised aluminium housing Full internal potting to resist shock and vibration Sealed to IP67 True Bi-polar product for low voltage DC applications
this range
Other voltages including DC options available in
SPECIFICATIONS
Ordering Information & Typical T echnical Characteristics (T a = 25°C)
Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE
LENS
AC/DC Vopr
DC (mA) lopr
INTENSITY
lv@20mA (mcd)
LENGTH λp (nm)
TEMP T opr
TEMP T stg
HIGH INTENSITY
698-501-63 698-521-63 698-532-63 698-930-63 698-997-63 698-501-75 698-521-75 698-532-75 698-930-75 698-997-75 UNITS Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White Smoked Smoked Smoked Smoked Smoked Smoked Smoked Smoked Smoked Smoked 12-28 12-28 12-28 12-28 12-28 110Vac 110Vac 110Vac 110Vac 110Vac Vac/Vdc 6-16 6-16 6-16 6-16 6-16 6 6 6 6 6 mA 11000 16000 23000 7000 14000 11000 16000 23000 7000 14000 mcd 643 591 527 470 *see below 643 591 527 470 *see below nm -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ °C -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 °C Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Refer to page 3.
x y
997F-C
0.245 0.229
*Typical emission colour cool white 0.361 0.356 0.264
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch.
0.385
0.351
0.220
How to Order:
website: www.marl.co.uk • email: sales@marl.co.uk • •
T elephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
relating to either products or service. for products or service.
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2007 : DS 063/07
Issue 2
SAMPLES AVAILABLE
Page 1 of
2
698 Series
Mounting Hole
Dimensions in mm (Typical) Not to scale
Mounting hole to be clean and burr free
MATERIALS
Body Nut Panel Seal T ermination Lock Washer Fresnel lens Encapsulation Header Aluminium grade 6063 black anodised Stainless Steel grade 303 Viton Copper with silver flash finish Zinc plated steel Polycarbonate PC5430 Nylon6 A82
PUSH-ON CONNECTORS
925-000-00 is brass tin plated.
Dimensions in mm (Typical) Not to scale
For use with 698 series lamps.
TECHNICAL CHARACTERISTICS
SERIES MAXIMUM PANEL NUT MINIMUM MIN/MAX.
DISSIPATION 698 825 mW
POWER
CUTOUT
TORQUE 0.65 Nm
MOUNTING
CENTRES x,y=14.5 mm
MOUNTING
THICKNESS 1.5-13.0 mm
PANEL
8.1 mm
DERATING INFORMATION
501 & 521 532, 930 & 997
How to Order:
website: www.marl.co.uk • email: sales@marl.co.uk • •
T elephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
relating to either products or service. for products or service.
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply
Approved Manufacturer
BS EN ISO 9001:2000
© MARL INTERNATIONAL LTD 2007 : DS 063/07
Issue 2
SAMPLES AVAILABLE
Page 2 of
2
很抱歉,暂时无法提供与“698-930-63”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+214.89995
- 15+204.35073
- 50+198.95636
- 100+196.22794
- 250+193.48910