699-930-75

PROFESSIONAL LED INDICATORS Ø12.7mm Mounting FEATURES Each product will operate over a wide voltage input range 699 SERIES PACK QUANTITY = 10 PIECES Black anodised aluminium housing Full internal potting to resist shock and vibration Sealed to IP67 True Bi-polar product for low voltage DC applications this range Other voltages including DC options available in SPECIFICATIONS Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS AC/DC Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH λp (nm) TEMP T opr TEMP T stg HIGH INTENSITY 699-501-63 699-521-63 699-532-63 699-930-63 699-997-63 699-501-75 699-521-75 699-532-75 699-930-75 699-997-75 UNITS Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12-28 12-28 12-28 12-28 12-28 110Vac 110Vac 110Vac 110Vac 110Vac Vac/Vdc 6-16 6-16 6-16 6-16 6-16 6 6 6 6 6 mA 11000 16000 23000 7000 14000 11000 16000 23000 7000 14000 mcd 643 591 527 470 *see below 643 591 527 470 *see below nm -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ °C -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 °C Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Refer to page 3. x y 997F-C 0.245 0.229 *Typical emission colour cool white 0.361 0.356 0.264 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 0.385 0.351 0.220 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 066/07 Issue 2 SAMPLES AVAILABLE Page 1 of 2 699 Series Below 50Vac/dc Above 50Vac/dc Mounting Hole Dimensions in mm (Typical) Not to scale Mounting hole to be clean and burr free MATERIALS Body Nut Panel Seal T ermination Lock Washer Fresnel lens Encapsulation Header Aluminium grade 6063 black anodised Stainless Steel grade 303 Viton Copper with silver flash finish Zinc plated steel Polycarbonate PC5430 Nylon6 A82 PUSH-ON CONNECTORS 925-000-00 is brass tin plated. Dimensions in mm (Typical) Not to scale For use with 699 series lamps. TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL NUT MINIMUM MIN/MAX. DISSIPATION 699 825 mW POWER CUTOUT TORQUE 1.0 Nm MOUNTING CENTRES x,y=26.0 mm MOUNTING THICKNESS 2.0-10.0 mm PANEL 12.7 mm DERATING INFORMATION 501 & 521 532, 930 & 997 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 066/07 Issue 2 SAMPLES AVAILABLE Page 2 of 2