MAX1088EKA-T

19-2036; Rev 0; 5/01 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 General Description The MAX1086–MAX1089 are low-cost, micropower, serial output 10-bit analog-to-digital converters (ADCs) available in a tiny 8-pin SOT23. The MAX1086/MAX1088 operate with a single +5V supply. The MAX1087/MAX1089 operate with a single +3V supply. The devices feature a successive-approximation ADC, automatic shutdown, fast wake-up (1.4µs), and a high-speed 3-wire interface. Power consumption is only 0.5mW (VDD = +2.7V) at the maximum sampling rate of 150ksps. Autoshutdown™ (0.1µA) between conversions results in reduced power consumption at slower throughput rates. The MAX1086/MAX1087 provide 2-channel, singleended operation and accept input signals from 0 to VREF. The MAX1088/MAX1089 accept true-differential inputs ranging from 0 to VREF. Data is accessed using an external clock through the 3-wire SPI™, QSPI™, and MICROWIRE™–compatible serial interface. Excellent dynamic performance, low-power, ease of use, and small package size, make these converters ideal for portable battery-powered data acquisition applications, and for other applications that demand low power consumption and minimal space. o Single-Supply Operation +3V(MAX1087/MAX1089) +5V(MAX1086/MAX1088) o AutoShutdown Between Conversions o Low Power 200µA at 150ksps 130µA at 100ksps 65µA at 50ksps 13µA at 10ksps 1.5µA at 1ksps 0.2µA in Shutdown o True-Differential Track/Hold, 150kHz Sampling Rate o Software-Configurable Unipolar/Bipolar Conversion (MAX1088/MAX1089 only) o SPI, QSPI, MICROWIRE–Compatible Interface for DSPs and Processors o Internal Conversion Clock o 8-Pin SOT23 Package Features MAX1086–MAX1089 Applications Low Power Data Acquisition Portable Temperature Monitors Flowmeters Touch Screens PART MAX1086EKA-T MAX1087EKA-T MAX1088EKA-T MAX1089EKA-T Ordering Information TEMP. RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PINPACKAGE 8 SOT23 8 SOT23 8 SOT23 8 SOT23 TOP MARK AAEZ AAEV AAFB AAEX Pin Configuration TOP VIEW VDD 1 AIN1 (AIN+) 2 AIN2 (AIN-) 3 8 7 SCLK DOUT CNVST REF GND 4 MAX1086 MAX1087 MAX1088 MAX1089 SOT23-8 6 5 AutoShutdown is a trademark of Maxim Integrated Products. SPI and QSPI are trademarks of Motorola Inc. MICROWIRE is a trademark of National Semiconductor Corp. ( ) ARE FOR THE MAX1088/MAX1089 ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 MAX1086–MAX1089 ABSOLUTE MAXIMUM RATINGS VDD to GND .............................................................-0.3V to +6V CNVST, SCLK, DOUT to GND......................-0.3V to (VDD+0.3V) REF, AIN1(AIN+), AIN2(AIN-) to GND..........-0.3V to (VDD+0.3V) Maximum Current Into Any Pin ...........................................50mA Continuous Power Dissipation (TA = +70°C) 8-Pin SOT23(derate 9.70mW/°C above TA = +70°C) ....777mW Operating Temperature Ranges.........................-40°C to +85°C Storage Temperature Range .............................-60°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = +2.7V to +3.6V, VREF = +2.5V for MAX1087/MAX1089, or VDD = +4.75V to +5.25V, VREF = +4.096V for MAX1086/MAX1088, 0.1µF capacitor at REF, fSCLK = 8MHz (50% duty cycle), AIN- = GND for MAX1088/MAX1089. TA = TMIN to TMAX, unless otherwise noted. Typical values at TA = +25°C.) PARAMETER DC ACCURACY (Note 1) Resolution Relative Accuracy (Note 2) Differential Nonlinearity Offset Error Gain Error (Note 3) Gain Temperature Coefficient Channel-to-Channel Offset Channel-to-Channel Gain Matching Input Common-Mode Rejection CMR VCM = 0V to VDD; zero scale input INL DNL No missing codes over temperature ±0.5 ±1.0 ±0.8 ±0.1 ±0.1 ±0.1 10 ±1.0 ±1.0 ±1.0 ±2.0 Bits LSB LSB LSB LSB ppm/°C LSB LSB mV SYMBOL CONDITIONS MIN TYP MAX UNITS DYNAMIC SPECIFICATIONS: (fIN (sine-wave) = 10kHz, VIN = 4.096Vp-p for MAX1086/MAX1088 or VIN = 2.5VPP for MAX1087/MAX1089, 150ksps, fSCLK = 8MHZ, AIN- = GND for MAX1088/MAX1089) Signal to Noise Plus Distortion Total Harmonic Distortion (up to the 5th harmonic) Spurious-Free Dynamic Range Full-Power Bandwidth Full-Linear Bandwidth CONVERSION RATE Conversion Time T/H Acquisition Time Aperture Delay Aperture Jitter Maximum Serial Clock Frequency Duty Cycle fSCLK 8 30 70 tCONV tACQ 30 56dB 61 -70 70 1 100 dB dB dB MHz kHz 2 _______________________________________________________________________________________ 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 ELECTRICAL CHARACTERISTICS (continued) (VDD = +2.7V to +3.6V, VREF = +2.5V for MAX1087/MAX1089, or VDD = +4.75V to +5.25V, VREF = +4.096V for MAX1086/MAX1088, 0.1µF capacitor at REF, fSCLK = 8MHz (50% duty cycle), AIN- = GND for MAX1088/MAX1089. TA = TMIN to TMAX, unless otherwise noted. Typical values at TA = +25°C.) PARAMETER ANALOG INPUT Input Voltage Range (Note 4) Input Leakage Current Input Capacitance EXTERNAL REFERENCE INPUT Input Voltage Range VREF VREF = +2.5V at 150ksps Input Current IREF VREF = +4.096V at 150ksps Acquisition/Between conversions DIGITAL INPUTS/OUTPUT (SCLK, CNVST, DOUT) Input Low Voltage Input High Voltage Input Leakage Current Input Capacitance Output Low Voltage Output High Voltage Three-State Leakage Current Three-State Output Capacitance POWER REQUIREMENTS Positive Supply Voltage VDD MAX1086/MAX1088 MAX1087/MAX1089 fSAMPLE =150ksps VDD = +3V fSAMPLE =100ksps fSAMPLE =10ksps fSAMPLE =1ksps Positive Supply Current IDD VDD = +5V fSAMPLE =150ksps fSAMPLE =100ksps fSAMPLE =10ksps fSAMPLE =1ksps Shutdown Positive Supply Rejection PSR VDD = 5V ±5%; full-scale input VDD = +2.7V to +3.6V; full-scale input 4.75 2.7 5.0 3.0 245 150 15 2 320 215 22 2.5 0.2 ±0.1 ±0.1 5 1.0 ±1.2 mV 400 µA 5.25 3.6 350 V VIL VIH IL CIN VOL VOH IL COUT ISINK = 2mA ISINK = 4mA ISOURCE = 1.5mA CNVST = GND CNVST = GND 15 VDD -0.5 ±10 15 0.4 0.8 VDD -1 ±0.1 0.8 V V µA pF V V V µA pF 1.0 16 26 ±0.01 VDD +50mV 30 45 ±1 µA V Unipolar Bipolar Channel not selected or conversion stopped 0 -VREF /2 ±0.01 34 VREF VREF/2 ±1 V µA pF SYMBOL CONDITIONS MIN TYP MAX UNITS MAX1086–MAX1089 _______________________________________________________________________________________ 3 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 MAX1086–MAX1089 TIMING CHARACTERISTICS (Figures 1 and 2) (VDD = +2.7V to +3.6V, VREF = +2.5V for MAX1087/MAX1089, or VDD = +4.75V to +5.25V, VREF = +4.096V for MAX1086/MAX1088, 0.1µF capacitor at REF, fSCLK = 8MHz (50% duty cycle); AIN- = GND for MAX1088/MAX1089. TA = TMIN to TMAX, unless otherwise noted. Typical values at TA = +25°C.) PARAMETERS SCLK Pulse Width High SCLK Pulse Width Low SCLK Fall to DOUT Transition SCLK Rise to DOUT Disable CNVST Rise to DOUT Enable CNVST Fall to MSB Valid CNVST Pulse Width SYMBOL tCH tCL tDOT tDOD tDOE tDOV tCSW CLOAD = 30pF CLOAD = 30pF CLOAD = 30pF CLOAD = 30pF 30 100 CONDITIONS MIN 38 38 60 500 80 3.7 TYP MAX UNITS ns ns ns ns ns µs ns Note 1: Unipolar input. Note 2: Relative accuracy is the deviation of the analog value at any code from its theoretical value after offset and gain errors have been removed. Note 3: Offset nulled. Note 4: The absolute input range for the analog inputs is from GND to VDD. CNVST ••• tCH tCL SCLK ••• tCSW tDOE DOUT HIGH-Z ••• tDOT tDOD HIGH-Z Figure 1. Detailed Serial-Interface Timing Sequence VDD 6kΩ DOUT 6kΩ GND DOUT CL CL GND a) HIGH -Z TO VOH, VOL TO VOH, AND VOH TO HIGH -Z a) HIGH -Z TO VOL, VOH TO VOL, AND VOL TO HIGH -Z Figure 2. Load Circuits for Enable/Disable Times 4 _______________________________________________________________________________________ 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 Typical Operating Characteristics (VDD = +3.0V, VREF = +2.5V for MAX1087/MAX1089 or VDD = +5.0V, VREF = +4.096V for MAX1086/MAX1088, 0.1µF capacitor at REF, fSCLK = 8MHz, (50% Duty Cycle), AIN- = GND for MAX1088/1089, TA = +25°C, unless otherwise noted.) INTEGRAL NONLINEARITY vs. OUTPUT CODE MAX1086-9 toc01 MAX1086–MAX1089 INTEGRAL NONLINEARITY vs. OUTPUT CODE MAX1086-9 toc02 DIFFERENTIAL NONLINEARITY vs. OUTPUT CODE MAX1087/MAX1089 0.8 0.6 0.4 DNL (LSB) 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 MAX1086-9 toc03 MAX1086-9 toc06 1.0 0.8 0.6 0.4 INL (LSB) MAX1087/MAX1089 1.0 0.8 0.6 0.4 INL (LSB) 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 MAX1086/MAX1088 1.0 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 0 200 400 600 800 1000 1200 OUTPUT CODE 0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200 OUTPUT CODE OUTPUT CODE DIFFERENTIAL NONLINEARITY vs. OUTPUT CODE MAX1086-9 toc04 SUPPLY CURRENT vs. SAMPLING RATE MAX1087/MAX1089 MAX1086-9 toc05 SUPPLY CURRENT vs. SAMPLING RATE 1000 MAX1086/MAX1088 1.0 0.8 0.6 0.4 DNL (LSB) 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 0 200 400 600 MAX1086/MAX1088 1000 SUPPLY CURRENT (µA) 10 SUPPLY CURRENT (µA) 100 100 10 1 1 800 1000 1200 0.1 0.001 1.0 10 1000 0.1 0.001 1.0 10 1000 OUTPUT CODE SAMPLING RATE (ksps) SAMPLING RATE (ksps) SUPPLY CURRENT vs. SUPPLY VOLTAGE 380 SUPPLY CURRENT ( µA) MAX1086-9 toc07 SHUTDOWN CURRENT vs. SUPPLY VOLTAGE 0.45 SHUTDOWN CURRENT (nA) 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 MAX1086-9 toc08 0.50 330 280 230 180 2.7 3.2 3.7 4.2 4.7 5.2 VDD (V) 0 2.7 3.2 3.7 4.2 4.7 5.2 VDD (V) _______________________________________________________________________________________ 5 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 MAX1086–MAX1089 Typical Operating Characteristics (continued) (VDD = 3.0V, VREF = 2.5V for MAX1087/MAX1089 or VDD = 5.0V, VREF = +4.096V for MAX1086MAX1088, 0.1µF capacitor at REF, fSCLK = 8MHz, (50% Duty Cycle), AIN- = GND for MAX1088/89, TA = +25°C, unless otherwise noted.) SUPPLY CURRENT vs. TEMPERATURE 380 SUPPLY CURRENT (µA) MAX1086-9 toc09 SHUTDOWN CURRENT vs. TEMPERATURE MAX1086-9 toc10 OFFSET ERROR vs. TEMPERATURE 0.80 0.60 OFFSET ERROR (LSB) 0.40 0.20 0.00 -0.20 -0.40 0.60 -0.80 MAX1086-9 toc11 300 250 SHUTDOWN CURRENT (nA) 200 150 100 50 0 1.00 330 280 230 180 -40 -20 0 20 40 60 80 TEMPERATURE (°C) -1.00 -40 -20 0 20 40 60 80 -40 -20 0 20 40 60 80 TEMPERATURE (°C) TEMPERATURE (°C) OFFSET ERROR vs. SUPPLY VOLTAGE MAX1086-9 toc12 GAIN ERROR vs. TEMPERATURE 0.8 0.6 GAIN ERROR (LSB) 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 MAX1086-9 toc13 1.0 0.8 0.6 OFFSET ERROR (LSB) 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 2.7 3.2 3.7 4.2 VDD (V) 4.7 5.2 1.0 -40 -20 0 20 40 60 80 TEMPERATURE (°C) GAIN ERROR vs. SUPPLY VOLTAGE MAX1086-9 toc14 FFT PLOT (SINAD) 0.00 -20.00 AMPLITUDE (dB) -40.00 -60.00 -80.00 MAX1086-9 toc15 1.0 0.8 0.6 GAIN ERROR (LSB) 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 2.7 3.2 3.7 4.2 4.7 5.2 VDD (V) 20.00 -100.00 -120.00 -140.00 0 15 30 45 60 FREQUENCY (kHz) 6 _______________________________________________________________________________________ 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 Pin Description NAME PIN MAX1086 MAX1087 VDD AIN1 AIN2 GND REF MAX1088 MAX1089 VDD AIN+ AINGND REF FUNCTION MAX1086–MAX1089 1 2 3 4 5 Positive Supply Voltage. +2.7V to +3.6V (MAX1087/MAX1089); +4.75V to +5.25V (MAX1086/MAX1088). Bypass with a 0.1µF capacitor to GND. Analog Input Channel 1 (MAX1086/MAX1087) or Positive Analog Input (MAX1088/MAX1089) Analog Input Channel 2 (MAX1086/MAX1087) or Negative Analog Input (MAX1088/MAX1089) Ground External Reference Voltage Input. Sets the analog voltage range. Bypass with a 0.1µF capacitor to GND. Conversion Start. A rising edge powers-up the IC and places it in track mode. At the falling edge of CNVST, the device enters hold mode and begins conversion. CNVST also selects the input channel (MAX1086/MAX1087) or input polarity (MAX1088/MAX1089). Serial Data Output. DOUT transitions the falling edge of SCLK. DOUT goes low at the start of a conversion and presents the MSB at the completion of a conversion. DOUT goes highimpedance once data has been fully clocked out. Serial Clock Input. Clocks out data at DOUT MSB first. 6 CNVST CNVST 7 8 DOUT SCLK DOUT SCLK Detailed Description The MAX1086–MAX1089 analog-to-digital converters (ADCs) use a successive-approximation conversion (SAR) technique and an on-chip track-and-hold (T/H) structure to convert an analog signal into a 10-bit digital result. The serial interface provides easy interfacing to microprocessors (µPs). Figure 3 shows the simplified internal structure for the MAX1086/MAX1087 (2–channels, single-ended) and the MAX1088/MAX1089 (1–channel, true-differential). True-Differential Analog Input Track/Hold The equivalent circuit of Figure 4 shows the MAX1086–MAX1089’s input architecture which is composed of a T/H, input multiplexer, comparator, and switched-capacitor DAC. The T/H enters its tracking mode on the rising edge of CNVST. The positive input capacitor is connected to AIN1 or AIN2 (MAX1086/ MAX1087) or AIN+ (MAX1088/MAX1089). The negative input capacitor is connected to GND (MAX1086/ MAX1087) or AIN- (MAX1088/MAX1089). The T/H enters its hold mode on the falling edge of CNVST and the difference between the sampled positive and negative input voltages is converted. The time required for the T/H to acquire an input signal is determined by how quickly its input capacitance is charged. If the input signal’s source impedance is high, the acquisition time lengthens, and CNVST must be held high for a longer period of time. The acquisition time, tACQ, is the maximum time needed for the signal to be acquired, plus the power-up time. It is calculated by the following equation: tACQ = 7 x (RS + RIN) x 24pF + tPWR 7 MAX1086–MAX1089 CNVST SCLK OSCILLATOR INPUT SHIFT REGISTER CONTROL AIN1 (AIN+) AIN2 (AIN-) REF T/H 10-BIT SAR ADC DOUT ( ) ARE FOR MAX1088/MAX1089 Figure 3. Simplified Functional Diagram _______________________________________________________________________________________ 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 MAX1086–MAX1089 AIN2 AIN1(AIN+) REF GND CIN+ HOLD CINGND(AIN-) HOLD *( ) APPLIES TO MAX1088/1089 VDD/2 TRACK RINRIN+ HOLD DAC DOUT after 3.7µs. Data can then be clocked out using SCLK. If all 12 bits of data are not clocked out before CNVST is driven high, AIN2 will be selected for the next conversion. COMPARATOR + Selecting Unipolar or Bipolar Conversions (MAX1088/MAX1089) Initiate true-differential conversions with the MAX1088/MAX1089 ’ s unipolar and bipolar modes, using the CNVST pin. AIN+ and AIN- are sampled at the falling edge of CNVST. In unipolar mode, AIN+ can exceed AIN- by up to V REF . The output format is straight binary. In bipolar mode, either input can exceed the other by up to VREF/2. The output format is two’s complement. Note: In both modes, AIN+ and AIN- must not exceed VDD by more than 50mV or be lower than GND by more than 50mV. If unipolar mode is desired (Figure 5a), drive CNVST high to power-up the ADC and place the T/H in track mode with AIN+ and AIN- connected to the input capacitors. Hold CNVST high for tACQ to fully acquire the signal. Drive CNVST low to place the T/H in hold mode. The ADC will then perform a conversion and shutdown automatically. The MSB is available at DOUT after 3.7µs. Data can then be clocked out using SCLK. Be sure to clock out all 12 bits (the 10-bit result plus two sub-bits) of data before driving CNVST high for the next conversion. If all 12 bits of data are not clocked out before CNVST is driven high, bipolar mode will be selected for the next conversion. If bipolar mode is desired (Figure 5b), drive CNVST high for at least 30ns. Next, drive it low for at least 30ns and then high again. This will place the T/H in track mode with AIN+ and AIN- connected to the input capacitors. Now hold CNVST high for t ACQ to fully acquire the signal. Drive CNVST low to place the T/H in hold mode. The ADC will then perform a conversion and shutdown automatically. The MSB is available at DOUT after 3.7µs. Data can then be clocked out using SCLK. If all 12 bits of data are not clocked out before CNVST is driven high, bipolar mode will be selected for the next conversion. Figure 4. Equivalent Input Circuit where RIN = 1.5kΩ, RS is the source impedance of the input signal, and tPWR = 1µs is the power-up time of the device. Note: tACQ is never less than 1.4µs and any source impedance below 300Ω does not significantly affect the ADC‘s AC performance. A high impedance source can be accommodated either by lengthening tACQ or by placing a 1µF capacitor between the positive and negative analog inputs. Selecting AIN1 or AIN2 (MAX1086/MAX1087) Select between the MAX1086/MAX1087’s two positive input channels using the CNVST pin. If AIN1 is desired (Figure 5a), drive CNVST high to power-up the ADC and place the T/H in track mode with AIN1 connected to the positive input capacitor. Hold CNVST high for tACQ to fully acquire the signal. Drive CNVST low to place the T/H in hold mode. The ADC will then perform a conversion and shutdown automatically. The MSB is available at DOUT after 3.7µs. Data can then be clocked out using SCLK. Be sure to clock out all 12 bits of data (the 10-bit result plus two sub-bits) before driving CNVST high for the next conversion. If all 12 bits of data are not clocked out before CNVST is driven high, AIN2 will be selected for the next conversion. If AIN2 is desired (Figure 5b), drive CNVST high for at least 30ns. Next, drive it low for at least 30ns, and then high again. This will power-up the ADC and place the T/H in track mode with AIN2 connected to the positive input capacitor. Now hold CNVST high for tACQ to fully acquire the signal. Drive CNVST low to place the T/H in hold mode. The ADC will then perform a conversion and shutdown automatically. The MSB is available at Input Bandwidth The ADCs input tracking circuitry has a 1MHz smallsignal bandwidth, so it is possible to digitize highspeed transient events and measure periodic signals with bandwidths exceeding the ADC’s sampling rate by using undersampling techniques. To avoid high frequency signals being aliased into the frequency band of interest, anti-alias filtering is recommended. 8 _______________________________________________________________________________________ 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 MAX1086–MAX1089 tCONV tACQ CNVST SCLK 1 4 8 12 DOUT HIGH-Z B9 MSB B8 B7 B6 B5 B4 B3 B2 B1 B0 LSB S1 S0 HIGH-Z SAMPLING INSTANT Figure 5a. Single Conversion AIN1 vs. GND (MAX1086/MAX1087), unipolar mode AIN+ vs. AIN- (MAX1088/MAX1089) tCONV tACQ CNVST SCLK 1 4 8 12 DOUT HIGH-Z B9 MSB B8 B7 B6 B5 B4 B3 B2 B1 B0 LSB S1 S0 HIGH-Z SAMPLING INSTANT Figure 5b. Single Conversion AIN2 vs. GND (MAX1086/MAX1087), bipolar mode AIN+ vs. AIN- (MAX1088/MAX1089) Analog Input Protection Internal protection diodes which clamp the analog input to VDD and GND allow the analog input pins to swing from GND - 0.3V to VDD + 0.3V without damage. Both inputs must not exceed VDD by more than 50mV or be lower than GND by more than 50mV for accurate conversions. If an off-channel analog input voltage exceeds the supplies, limit the input current to 2mA. Internal Clock The MAX1086–MAX1089 operate from an internal oscillator, which is accurate within 10% of the 4MHz specified clock rate. This results in a worse case conversion time of 3.7µs. The internal clock releases the system microprocessor from running the SAR conversion clock and allows the conversion results to be read back at the processor’s convenience, at any clock rate from 0 to 8MHz. _______________________________________________________________________________________ 9 150ksps, 10-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 MAX1086–MAX1089 Output Data Format Figures 5a and 5b illustrate the conversion timing for the MAX1086–MAX1089. The 10-bit conversion result is output in MSB first format, followed by two sub-bits (S1 and S0). Data on DOUT transitions on the falling edge of SCLK. All 12-bits must be clocked out before CNVST transitions again. For the MAX1088/MAX1089, data is straight binary for unipolar mode and two’s complement for bipolar mode. For the MAX1086/MAX1087, data is always straight binary. Transfer Function Figure 6 shows the unipolar transfer function for the MAX1086–MAX1089. Figure 7 shows the bipolar transfer function for the MAX1088/MAX1089. Code transitions occur halfway between successive-integer LSB values. Connection to Standard Interfaces The MAX1086–MAX1089 feature a serial interface that is fully compatible with SPI, QSPI, and MICROWIRE. If a serial interface is available, establish the CPU’s serial interface as a master, so that the CPU generates the serial clock for the ADCs. Select a clock frequency up to 8MHz. Applications Information Automatic Shutdown Mode With CNVST low, the MAX1086–MAX1089 defaults to an AutoShutdown state (