1H7G-TP

1H1G THRU 1H7G Features • Halogen Free Available Upon Request By Adding Suffix "-HF" • Low Leakage Current • Lead Free Finish/RoHS Compliant(Note 1)("P" Suffix Designates Compliant. See Ordering Information) • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 1.0 Amp High Efficient Rectifier 50 to 1000 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance: 95⁰C/W Junction to Ambient MCC Part Number 1H1G 1H2G 1H3G 1H4G 1H5G 1H6G 1H7G Device Marking R-1 Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 1H1G 1H2G 1H3G 1H4G 1H5G 1H6G 1H7G 50V 100V 200V 400V 600V 800V 1000V 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V D A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage 1H1G-1H3G 1H4G 1H5G-1H7G Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance 1H1G-1H4G 1H5G-1H7G Maximum Reverse Recovery Time 1H1G-1H4G 1H5G-1H7G IF(AV) IFSM VF IR CJ 1.0A TA=55⁰C 30A 8.3ms,Half Sine 1.0V 1.3V 1.7V IFM=1.0A; 5.0μA 100μA TJ=25⁰C; 20pF 15pF Measured at 1.0MHz VR=4.0V trr 50ns 75ns B D C TJ=25⁰C TJ=125⁰C IF=0.5A; IR=1.0A; Irr=0.25A DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.116 0.140 2.90 3.50 0.091 0.102 2.30 2.60 0.020 0.024 0.50 0.60 0.787 ----- 20.00 ----- NOTE Note :1. High Temperature Solder Exemption Applied,See EU Directive Annex 7a. Rev.3-1-01012019 1/3 MCCSEMI.COM 1H1G THRU 1H7G Curve Characteristics 1.2 35 1.0 30 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 0.8 0.6 0.4 0.2 0.0 Resistive or Inductive Load 0 25 50 75 100 125 25 20 15 10 5 0 150 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 8.3 ms Single Half Sine-Wave 1 Number of Cycles at 60 Hz Fig. 4 - Typical Reverse Leakage Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics 100 Instantaneous Reverse Leakage Current (μA) 10 Instantaneous Forward Current (A) 100 10 Ambient Temperature (°C) HER101G-HER104G 1 HER106G-HER108G HER105G 0.1 TJ=25°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TJ=125°C 1 TJ=75°C TJ=25°C 0.1 0.01 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Rev.3-1-01012019 10 2/3 MCCSEMI.COM 1H1G THRU 1H7G Ordering Information Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 3Kpcs/AmmoBox Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 3/3 MCCSEMI.COM