1N5407

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# 1N5400 THRU 1N5408 3 Amp Rectifier 50 - 1000 Volts Features • • Low Current Leakage and Low Forward Voltage Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • • • Maximum Ratings Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C Maximum Thermal Resistance; 30 °C/W Junction To Lead Device Marking Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 500V 600V 800V 1000V Maximum RMS Voltage Maximum DC Blocking Voltage 50V 100V 200V 400V 500V 600V 800V 1000V DO-201AD MCC Catalog Number D 1N5400 1N5401 1N5402 1N5404 1N5405 1N5406 1N5407 1N5408 1N5400 1N5401 1N5402 1N5404 1N5405 1N5406 1N5407 1N5408 35V 70V 140V 280V 350V 420V 560V 700V A Cathode Mark B D Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance IF(AV) IFSM 3.0A 200A Ta = 105°C 8.3ms, half sine C DIMENSIONS VF 1.0V 5.0µA 100µA 40pF IF= 3.0A; Ta = 25°C Ta= 25°C Ta= 150°C Measured at 1.0MHz, VR=4.0V IR DIM A B C D INCHES MIN MAX .287 .374 .189 .208 .048 .052 1.000 --- MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --NOTE CJ Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: A www.mccsemi.com 1 of 4 2011/01/01 1N5400 thru 1N5408 Figure 1 Typical Forward Characteristics MCC TM Micro Commercial Components Figure 2 Forward Derating Curve Tj = 25ºC 200 IF INSTANTANEOUS FORWARD CURRENT (A) , 100 3.0 2.5 Pulse test: Pulse width 300 µsec, Duty cycle 2% 2 10 1.5 Amps 1.0 1.0 .5 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0.2 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts 0 0 50 75 100 °C 125 150 175 Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C Figure 3 Junction Capacitance 100 60 40 20 pF 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 TJ=25°C Junction Capacitance - pFversus Reverse Voltage - Volts Revision: A www.mccsemi.com 2 of 4 2011/01/01 1N5400 thru 1N5408 Figure 4 Typical Reverse Characteristics 100 MCC TM Figure 5 Peak Forward Surge Current 300 250 200 Micro Commercial Components TJ = 150 C O 10 µ Amps 1.0 TJ = 100 C O 150 Amps 100 50 0 1 4 6 8 10 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles 20 40 60 80 100 TJ = 25 C O 0.1 0 .01 20 40 60 80 100 120 140 2 Volts Instantaneous Reverse Leakage Current - MicroAmperes ersus v Percent Of Rated Peak Reverse Voltage - Volts Revision: A www.mccsemi.com 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 1.2Kpcs/Reel Ammo Packing: 1.2Kpcs/Ammo Box Bulk: 12Kpcs/Carton ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01