FR1004-TP

MCC TM Micro Commercial Components FR1001 THRU FR1007
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Halogen free available upon request by adding suffix "-HF" High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 300A Peak Low Reverse Leakage Current and Diffused Junction Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 • • • • • • 10 Amp Rectifier 50 to 1000 Volts R-6 Maximum Ratings • • Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C MCC Catalog Number FR1001 FR1002 FR1003 FR1004 FR1005 FR1006 FR1007 Device Marking Maximum Reccurrent Peak Reverse Voltage 50V FR1001 FR1002 100V 200V FR1003 400V FR1004 FR1005 600V 800V FR1006 1000V FR1007 Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V D A Cathode B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time FR1001-FR1004 FR1005 FR1006-FR1007 IF(AV) 10 A TA = 55°C IFSM 300A 8.3ms, half sine VF 1.3V IFM = 10A; TA = 25°C IR 10µA 50µA TA = 25°C TA = 100°C Trr 150ns 250ns 500ns I F=0.5A, IR=1.0A, I rr=0.25A D C DIMENSIONS DIM A B C D INCHES MIN .340 .340 .048 1.000 MAX .360 .360 .052 --- MM MIN 8.60 8.60 1.20 25.40 MAX 9.10 9.10 1.30 --- NOTE Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: A www.mccsemi.com 1 of 4 2013/04/18 MCC TM FR100 1 thru FR1007 Micro Commercial Components Figure 1 Typical Forward Characteristics 20 Figure 2 Forward Derating Curve 10 12 6 4 10 2 25°C Amps 8 1 .6 6 Amps .4 4 .2 2 .1 Single Phase, Half Wave 60Hz Resistive or Inductive Load .06 0 .04 0 50 75 125 150 175 °C .02 .01 100 .8 1.0 1.2 1.4 1.6 1.8 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25°C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pFversus Reverse Voltage - Volts Revision: A www.mccsemi.com 2 of 4 2013/04/18 MCC TM FR1001 thru FR1007 Micro Commercial Components Figure 4 Peak Forward Surge Current 300 250 200 150 Amps 100 50 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 Pulse Generator Note 2 25Vdc 1Ω Oscilloscope Note 1 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Revision: A -0.25 www.mccsemi.com 3 of 4 2013/04/18 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 500pcs/Reel Part Number-AP Ammo Packing: 450pcs/Ammo Box Part Number-BP Bulk: 4.8Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2013/04/18 3