FR506

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# FR501 THRU FR507 5 Amp Fast Recovery Rectifier 50 to 1000 Volts DO-201AD • • • • Features Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Low Forward Voltage Drop and High Current Capability Fast Switching Speed For High Efficiency Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) • Maximum Ratings • • MCC Catalog Number FR501 FR502 FR503 FR504 FR505 FR506 FR507 Device Marking Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V IF(AV) IFSM 5A 200A Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V D FR501 FR502 FR503 FR504 FR505 FR506 FR507 A Cathode Mark B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time FR501-504 FR505 FR506-507 Typical Junction Capacitance TA = 55°C 8.3ms, half sine IFM = 5.0A; TA = 25°C D C VF 1.35V 10µA 150µA DIMENSIONS IR TA = 25°C TA = 55°C DIM A B C D INCHES MIN .287 .189 .048 1.000 MAX .374 .208 .052 --- MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --- NOTE Trr CJ 150ns 250ns 500ns 65pF IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: A 1 of 4 2011/01/01 FR501 thru FR507 Figure 1 Typical Forward Characteristics 20 10 6 4 5.0 2 Amps 1 .6 .4 .2 .1 .06 .04 .02 .01 .4 .6 .8 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts 1.0 12 1.4 0 1.0 Amps 2.0 25°C 6.0 Figure 2 Forward Derating Curve MCC TM Micro Commercial Components 4.0 3.0 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 50 75 100 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C 125 150 175 Figure 3 Junction Capacitance 100 60 40 20 pF 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 TJ=25°C Junction Capacitance - pFversus Reverse Voltage - Volts www.mccsemi.com Revision: A 2 of 4 2011/01/01 FR501 thru FR507 Figure 4 Peak Forward Surge Current 300 250 200 150 Amps 100 50 0 1 4 6 8 10 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles 20 40 60 80 100 MCC TM Micro Commercial Components 2 Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 25Vdc Pulse Generator Note 2 1Ω Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.mccsemi.com Revision: A 3 of 4 2011/01/01 MCC TM Micro Commercial Components Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 1.2Kpcs/Reel Ammo Packing: 1.2Kpcs/Ammo Box Bulk: 12Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01