HER106S

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# HER101S THRU HER108S 1.0 Amp High Efficient Rectifiers 50 to 1000 Volts A-405 • • • • • • Features • • • Maximum Ratings High Surge Current Capability High Reliability Low Forward Voltage Drop Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Operating Temperature: -55 °C to +125°C Storage Temperature: -55°C to +150°C For capcitive load, derate current by 20% MCC Device Maximum Maximum Catalog Marking Recurrent RMS Number Peak Reverse Voltage Voltage HER101S HER101S 50V 35V HER102S HER102S 100V 70V HER103S HER103S 200V 140V HER104S HER104S 300V 210V HER105S HER105S 400V 280V HER106S HER106S 600V 420V HER107S HER107S 800V 560V HER108S HER108S 1000V 700V Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage HER101S-104S HER105S HER106S -108S Reverse Current At Rated DC Blocking Voltage (Maximum DC) Maximum Reverse Recovery Time HER101S-105S HER106S-108S Typical Junction Capacitance HER101S-105S HER106S-108S IF(AV) IFSM 1.0 A 30A Maximum DC Blocking Voltage 50V 100V 200V 300V 400V 600V 800V 1000V D Electrical Characteristics @ 25°C Unless Otherwise Specified TA = 55°C 8.3ms, half sine A Cathode Mark B D C VF IR 1.0V 1.3V 1.7V 5.0µA 100µA IFM = 1.0A; TA = 25°C TA = 25°C TA = 100°C DIM A B C D INCHES MIN .166 .080 .021 1.000 DIMENSIONS MM MIN 4.10 2.00 .53 25.40 Trr 50ns 75ns 20pF 15pF IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V MAX .205 .107 .025 --- MAX 5.20 2.70 .64 --- NOTE CJ Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. Revision: A www.mccsemi.com 1 of 3 2011/01/01 HER101S THRU HER108S RATINGS AND CHARACTERISTIC CURVES FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM AVERAGE FORWARD CURRENT. (A) 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A DUT (-) PULSE GENERATOR (NOTE 2) OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr MCC Micro Commercial Components FIG.2- MAXIMUM AVERAGE FORWARD CURRENT DERATING 2.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length TM (+) 50Vdc (approx) (-) 1.0 1W NON INDUCTIVE NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm 0 0 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE. ( C) FIG.3- TYPICAL REVERSE CHARACTERISTICS 1000 FIG.4- TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) 100 Tj=100 0C 1.0 10 Tj=25 0C 0.1 1 0.01 0.1 0 20 40 60 80 100 120 140 0.001 .2 .4 .6 HE R1 01S ~H ER 104 HE S R1 05 HE S R1 06 S~ HE R1 08 S .8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 FIG.6- TYPICAL JUNCTION CAPACITANCE PEAK FORWARD SURGE CURRENT. (A) 30 25 20 15 10 0 1 2 5 10 JUNCTION CAPACITANCE.(pF) 35 8.3ms Single Half Sine Wave JEDEC Method 60 50 40 30 20 10 HER 101 S~H ER1 HE 05S R10 6S~ HE R10 8S 20 50 100 0 .1 .5 1 2 5 10 20 50 100 200 500 1000 NUMBER OF CYCLES AT 60Hz REVERSE VOLTAGE. (V) www.mccsemi.com Revision: A 2 of 3 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-BP Packing Tape&Reel: 5Kpcs/Reel Bulk: 50Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 3 of 3 2011/01/01