S2M-LTP

S2A-L THRU S2M-L Features • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates Compliant. See Ordering Information) • High Current Capability • Low Forward Voltage Drop • For Surface Mount Applications • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 • Halogen Free Available Upon Request By Adding Suffix "-HF" 2.0 Amp Glass Passivated Silicon Rectifier 50 to 1000 Volts Maximum Ratings • Operating Junction Temperature Range: -65⁰C to +150⁰C • Storage Temperature Range: -65⁰C to +150⁰C • Typical Thermal Resistance: 20°C/W Junction to Lead MCC Part Number Device Marking Maximum Recurrent Peak Reverse Voltage S2A-L S2B-L S2D-L S2G-L S2J-L S2K-L S2M-L S2A S2B S2D S2G S2J S2K S2M 50V 100V 200V 400V 600V 800V 1000V SMB (DO-214AA) H Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V J Cathode Mark A E Average Forward Current IF(AV) 2.0A TL=100⁰C Peak Forward Surge Current IFSM 50A 8.3ms,Half Sine VF 1.15V Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage IR Typical Junction Capacitance CJ 5μA 125μA 20pF IFM=2.0A; TJ=25⁰C* TJ=25⁰C; TJ=125⁰C Measured at 1.0MHz VR=4.0V D F B G DIM Electrical Characteristics @ 25°C Unless Otherwise Specified C A B C D E F G H J DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.075 0.087 1.91 2.21 0.002 0.008 0.05 0.20 0.006 0.012 0.15 0.31 0.030 0.060 0.76 1.52 0.065 0.091 1.65 2.32 0.200 0.220 5.08 5.59 0.160 0.191 4.06 4.85 0.130 0.155 3.30 3.94 NOTE Suggested Solder Pad Layout 1.80mm 2.30mm *Pulse Test: Pulse Width 300 μsec, Duty Cycle 2% Note:1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. 2.50mm Rev.3-2-10242019 1/3 MCCSEMI.COM S2A-L THRU S2M-L Curve Characteristics 60 2.0 50 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 2.4 1.6 1.2 0.8 0.4 Resistive or Inductive Load 0.0 0 20 40 60 80 100 120 140 30 20 10 8.3 ms Single Half Sine-Wave 1 100 10 Lead Temperature (°C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics 100 Instantaneous Reverse Leakage Current (μA) 100 Instantaneous Forward Current (A) 40 0 160 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 10 TJ=25°C 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TJ=75°C 1 TJ=25°C 0.1 0.01 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Rev.3-2-10242019 TJ=125°C 10 2/3 MCCSEMI.COM S2A-L THRU S2M-L Ordering Information Device Packing S2A-LTP~S2M-LTP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. S2A-LTP-HF~S2M-LTP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-10242019 3/3 MCCSEMI.COM