SF13G-AP

SF11G THRU SF18G Features • Super Fast Switching Speed • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 • Halogen Free Available Upon Request By Adding Suffix "-HF" Maximum Ratings • • • • 1.0 Amp Glass Passivated Super Fast Recovery Rectifier 50 to 600 Volts Operating Junction Temperature Range: -55⁰C to +150⁰C Storage Temperature Range: -55⁰C to +150⁰C Typical Thermal Resistance: 80°C/W Junction to Ambient Typical Thermal Resistance: 20°C/W Junction to Lead MCC Part Number SF11G SF12G SF13G SF14G SF15G SF16G SF18G Device Marking DO-41 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage 50V 100V 150V 200V 300V 400V 600V 35V 70V 105V 140V 210V 280V 420V 50V 100V 150V 200V 300V 400V 600V SF11G SF12G SF13G SF14G SF15G SF16G SF18G D A Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 1.0A See Fig.1 Peak Forward Surge Current IFSM 30A 8.3ms,Half Sine VF 0.95V 1.3V 1.7V Maximum Instantaneous Forward Voltage SF11G-SF14G SF15G-SF16G SF18G Maximum DC Reverse Current At Rated DC Blocking Voltage IR Maximum Reverse Recovery Time trr Typical Junction Capacitance SF11G-SF14G SF15G-SF18G CJ C TJ=25⁰C; 100μA TJ=125⁰C 20pF 10pF B D IFM=1.0A; 5.0μA 35ns Cathode Mark IF=0.5A; IR=1.0A; IRR=0.25A Measured at 1.0MHz VR=4.0V DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.71 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ Note:1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. Rev.3-3-12012020 1/3 MCCSEMI.COM SF11G THRU SF18G Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 1.2 35 TL 0.8 TA 0.6 0.4 0.2 0.0 Resistive or Inductive Load 0 25 50 30 Peak Forward Surge Current (A) Average Forward Current (A) 1.0 75 100 125 25 20 15 10 8.3 ms Single Half Sine-Wave 5 0 150 1 Number of Cycles at 60 Hz Fig. 4 - Typical Reverse Leakage Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics 100 Instantaneous Reverse Leakage Current (μA) 50 Instantaneous Forward Current (A) 20 10 100 10 Temperature (°C) SF11G-SF14G 5 2 SF18G 1 SF15G-SF16G 0.5 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.5 1.0 1.5 2.0 2.5 3.0 TJ=125°C TJ=75°C 1 TJ=25°C 0.1 0.01 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Rev.3-3-12012020 10 2/3 MCCSEMI.COM SF11G THRU SF18G Ordering Information Device Packing (Part Number)-TP Tape&Reel: 5Kpcs/Reel (Part Number)-AP Ammo Packing: 5Kpcs/Ammo Box (Part Number)-BP Bulk:1Kpcs/Box,50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-3-12012020 3/3 MCCSEMI.COM