SLVU2.8-TP

MCC Micro Commercial Components TM Micro Commercial Components 20736 Marilla Street Chatsworth Chatsworth, CA 91311 Phone: (818) 701-4933 Fax: (818) 701-4939 SLVU2.8 Features • • • • • • For sensitive ESD protection Stand-off Voltage:2.8V Low leakage Low clamping voltage 500W peak pulse power (tp=8/20us) Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) 2.8Volts ESD Protection Devices SOT-23 A D • • • • Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Operating Junction Temperature: -55°C to +125°C StorageTemperature: -55°C to +125oC Symbol Air Contact Limits f15 f8 24 500 unit KV A W G Maximum Ratings C B Parameter IEC61000-4-2(ESD) IEC61000-4-5(lightning) Peak Pulse Power F E H J Pd K Pin Configuration-Top View DIM A B C D E F G H J K INCHES MIN .110 .083 .047 .035 .070 .018 .0005 .035 .003 .015 MAX .120 .104 .055 .041 .081 .024 .0039 .044 .007 .020 MM MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE .031 .800 .035 .900 .079 2.000 inches mm .037 .950 .037 .950 www.mccsemi.com Revision: A 1 of 4 2011/10/10 MCC Micro Commercial Components TM ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) UNIDIRECTIONAL (Circuit tied to Pins 1 and 3 or 2 and 3) Symbol IPP VC VRWM IR VBR IT IF VF Ppk C Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Forward Current Forward Voltage @ IF Peak Power Dissipation Capacitance @VR=0 and f =1MHz ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10mA for all types) IR ( VRWM (V) Device Max @ VRWM Max @ IT(Note 2) Min Typ mA A) VBR (V) IT @IPP =1 A V VC Vc @IPP=5A V C (pF) Ppk + (W) Pin 1 to 3 Max Typ SLVU2.8 2.8 1.0 3.0 4.0 1.0 5 8 500 13 VBR is measured with a pulse test current IT at ambient temperature of 25°C. Revision: A www.mccsemi.com 2 of 4 2011/10/10 MCC Micro Commercial Components TM TYPICAL CHARACTERISTICS Typical Characteristics 10 110 100 % Of Rated Power 1 10 Pulse Duration – tp (uS) 100 1000 1 80 60 40 20 0.1 0.01 0.1 0 0 25 50 75 100 125 150 Ambient Temperature - TA (°C) Fig1.Non-Repetitive Peak Pulse Power vs. Pulse time Fig2. Power Derating Curve 110 IPP – Peak Pulse Current - % of IPP 100 80 60 tf=8μs Test Waveform Parameters tf=8us td=20us 40 20 tP =20μs(IPP /2) 0 0 5 10 15 20 25 30 t - Time -μs Fig 3.Pulse Waveform Revision: A www.mccsemi.com 3 of 4 2011/10/10 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/10/10