SMB10J85CA-TP

SMB10J5.0(C)A THRU SMB10J120(C)A E480232 Features • • Glass Passivated Chip 1000W Peak Pulse Power Capability with a 10/1000 us Waveform, Repetitive Rate(dutycycle):0.01% Low Inductance For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.e.SMB10J5.0CA for 5% Tolerance Halogen Free. “Green” Device (Note 1) Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note 2) ("P" Suffix Designates RoHS Compliant. See Ordering Information) • • • • • • • 1000 Watt TVS 5.0 to 120 Volts SMB (DO-214AA) (LEAD FRAME) Mechanical Data • Terminals: Solderable Per MIL-STD-750, Method 2026 • Polarity: Color Band Denotes Positive End (cathode) Except Bidirectiona H Maximum Ratings • • J Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Peak Pulse Power Surge Current on 10/1000μs Waveform D IPP See the Table Note 3 A C E B F G Peak Pulse Power Dissipation PPP 1000W Note 3 DIM Power Dissipationon infinite heat sink PD 5.0W TL = 75°C Peak forward surge current IFSM 100A Note 4 Maximum instantaneous forward voltage at 25A for unidirectional only VF 3.5V/5.0V A B C D E F G H J DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.075 0.087 1.91 2.21 0.002 0.008 0.05 0.20 0.006 0.012 0.15 0.31 0.030 0.060 0.76 1.52 0.065 0.091 1.65 2.32 0.200 0.220 5.08 5.59 0.160 0.191 4.06 4.85 0.130 0.155 3.30 3.94 NOTE Note 5 Suggested Solder Pad Layout Notes: 1.Halogen free "Green"products are defined as those which contain