SMBJ5369B-TP

MCC TM Micro Commercial Components Features x x x x x • • SMBJ5338B THRU SMBJ5388B
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Low Profile Package for Surface Mountiong(Flat Handling Surface for Accurate Placement) Zener Voltage 5.1V to 200V High Surge Current Capability For Available Tolerances-see Note 1 Available on Tape and Reel (see E1A std RS-481) Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Halogen free available upon request by adding suffix "-HF" 5 Watt Surface Mount Silicon Zener Diode 5.1 to 200 Volts DO-214AA (SMB) (Lead Frame) Mechanical Data H x Standard JEDEC Outlines as Shown x Marking: See page 2 x Maximum Temperature for Soldering: 260к for 10 Seconds • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 J Electrical Characteristics @ 25qC Unless Otherwise Specified Forward Voltage at 1.0A Current Steady State Power Dissipation Operating and Storage Temperatures Thermal Resistance A VF 1.2Volts P(AV) 5Watts See Note 2 TJ, TSTG -55к to +150к R șJL 15к/W E R șJA 90к/W Note: 1.High Tempertaure Solder Exemptions Applied,see EU Directive Annex 7. 2. Lead temperature at 75к = TL at mounting plane. Derate linearly above 75к to zero power at 150 к 3. Ambient temperature at 15к = TA at mounting plane. Derate linearly above 15к to zero power at 150 к C D B G DIMENSIONS DIM A B C D E G H J INCHES MIN .075 .077 .002 ----.030 .200 .160 .130 MM MIN 1.91 1.96 .05 ----.76 5.08 4.06 3.30 MAX .095 .083 .008 .02 .060 .220 .187 .155 MAX 2.41 2.10 .20 .51 1.52 5.59 4.75 3.94 NOTE SUGGESTED SOLDER PAD LAYOUT 0.090" 0.085” 0.070” Revision: J www.mccsemi.com 1 of 5 2014/09/09 MCC SMBJ5338B thru SMBJ5388B TM Micro Commercial Components ELECTRICAL CHARACTERISTICS @25ć MAXIMUM SURGE CURRENT IZSM MAXIMUM VOLTAGE REGULATION OHMS A VOLTS 400 14.4 0.39 TEST CURRENT IZ MAXIMUM DYNAMIC IMPEDANCE ZZT MAXIMUM REVERSE CURRENT IR VOLTS mA OHMS SMBJ5338B 5.1 240 1.5 µA 1 SMBJ5339B 5.6 220 1 1 2 865 400 13.4 0.25 SMBJ5340B 6 200 1 1 3 790 300 12.7 0.19 SMBJ5341B 6.2 200 1 1 3 765 200 12.4 0.1 SMBJ5342B 6.8 175 1 10 5.2 700 200 11.5 0.15 SMBJ5343B 7.5 175 1.5 10 5.7 630 200 10.7 0.15 SMBJ5344B 8.2 150 1.5 10 6.2 580 200 10 0.2 SMBJ5345B 8.7 150 2 10 6.6 545 200 9.5 0.2 SMBJ5346B 9.1 150 2 7.5 6.9 520 150 9.2 0.22 SMBJ5347B 10 125 2 5 7.6 475 125 8.6 0.22 SMBJ5348B 11 125 2.5 5 8.4 430 125 8 0.25 SMBJ5349B 12 100 2.5 2 9.1 395 125 7.5 0.25 SMBJ5350B 13 100 2.5 1 9.9 365 100 7 0.25 SMBJ5351B 14 100 2.5 1 10.6 340 75 6.7 0.25 SMBJ5352B 15 75 2.5 1 11.5 315 75 6.3 0.25 SMBJ5353B 16 75 2.5 1 12.2 295 75 6 0.3 SMBJ5354B 17 70 2.5 0.5 12.9 280 75 5.8 0.35 SMBJ5355B 18 65 2.5 0.5 13.7 264 75 5.5 0.4 SMBJ5356B 19 65 3 0.5 14.4 250 75 5.3 0.4 SMBJ5357B 20 65 3 0.5 15.2 237 75 5.1 0.4 SMBJ5358B 22 50 3.5 0.5 16.7 216 75 4.7 0.45 SMBJ5359B 24 50 3.5 0.5 18.2 198 100 4.4 0.55 SMBJ5360B 25 50 4 0.5 19 190 110 4.3 0.55 SMBJ5361B 27 50 5 0.5 20.6 176 120 4.1 0.6 SMBJ5362B 28 50 6 0.5 21.2 170 130 3.9 0.6 SMBJ5363B 30 40 8 0.5 22.8 158 140 3.7 0.6 SMBJ5364B 33 40 10 0.5 25.1 144 150 3.5 0.6 SMBJ5365B 36 30 11 0.5 27.4 132 160 3.3 0.65 SMBJ5366B 39 30 14 0.5 29.7 122 170 3.1 0.65 SMBJ5367B 43 30 20 0.5 32.7 110 190 2.8 0.7 SMBJ5368B 47 25 25 0.5 35.8 100 210 2.7 0.8 SMBJ5369B 51 25 27 0.5 38.8 93 230 2.5 0.9 SMBJ5370B 56 20 35 0.5 42.6 86 280 2.3 1 SMBJ5371B 60 20 40 0.5 45.5 79 350 2.2 1.2 SMBJ5372B 62 20 42 0.5 47.1 76 400 2.1 1.35 SMBJ5373B 68 20 44 0.5 51.7 70 500 2 1.5 SMBJ5374B 75 20 45 0.5 56 63 620 1.9 1.6 SMBJ5375B 82 15 65 0.5 62.2 58 720 1.8 1.8 SMBJ5376B 87 15 75 0.5 66 54.5 760 1.7 2 SMBJ5377B 91 15 75 0.5 69.2 52.5 760 1.6 2.2 SMBJ5378B 100 12 90 0.5 76 47.5 800 1.5 2.3 SMBJ5379B 110 12 125 0.5 83.6 43 1000 1.4 2.5 SMBJ5380B 120 10 170 0.5 91.2 39.5 1150 1.3 2.5 SMBJ5381B 130 10 190 0.5 98.8 36.6 1250 1.2 2.5 SMBJ5382B 140 8.0 230 0.5 106 34 1500 1.2 2.5 SMBJ5383B 150 8.0 330 0.5 114 31.6 1500 1.1 3 SMBJ5384B 160 8.0 350 0.5 122 29.4 1650 1.1 3 SMBJ5385B 170 8.0 380 0.5 129 28 1750 1.0 3 SMBJ5386B 180 5.0 430 0.5 137 26.4 1750 1.0 4 SMBJ5387B 190 5.0 450 0.5 144 25 1850 0.9 5 SMBJ5388B 200 5.0 480 0.5 152 23.6 1850 0.9 5 MCC PART NUMBER Revision: J REGULATOR VOLTAGE VZ MAXIMUM REGULATOR CURRENT IZM MAXIMUM DYNAMIC KNEE IMPEDANCE ZZK@1.0mA VOLTS mA 1 930 TEST VOLTAGE VR www.mccsemi.com 2 of 5 2014/09/09 MCC SMBJ5338B thru SMBJ5388B TM Micro Commercial Components Marking Code Info. MCC 369B Cathode Band Logo Type No. For Example: 339B for SMBJ5339B 369B for SMBJ5369B Note 1 Devices listed have a ± 5% tolerance on nominal V Z. _ Suffix C denotes a +2% Note 2 Nominal Zener Voltage (V Z) is tested with a 40 +/-10 milliseconds pulse current at 25°C to avoid self-heat affection. Note 5 The Maximum Zener Current (I ZM) shown is for ± 5% tolerance devices. I ZM for ± 10% and ± 20% devices can be calculated using the formula: IZM = P V ZM Where “V ZM” is V Z at the high end of the voltage tolerance specified and “P” is the rated power of the device. Note 3 Note 4 The Zener impedance (Z ZT or ZZK is derived from the 60 HZ ac voltage, which results when an ac current having a rms value equal to 10% of the dc zener current (I ZT or IZK) is superimposed on I ZT or IZK respectively. Note 6 The Surge Current (I ZM) is specified as the maximum peak of a nonrecurring sine wave of 8.3 milliseconds duration. Note 7 Voltage Regulation ( ∆VZ) is the difference between the voltage measured at 10% and 50% I ZM). The Maximum Reverse (leakage) Current is specified for devices with ± 20% and ± 10% voltage tolerances on nominal V Z in another column. Revision: J www.mccsemi.com 3 of 5 2014/09/09 MCC TM RATING AND CHARACTERISTICS CURVES Micro Commercial Components PD, MAXIUMU POWER DISSIPATION (WATTS) SMBJ5338B THRU SMBJ5388B 7 5 θVZ , TEMPERATURE COEFFICIENT (mV/°C) @ I ZT 6 TL 4 3 2 1 TA 0 0 20 40 60 80 100 300 200 100 RANGE 50 30 20 10 5 0 20 40 60 80 100 120 140 160 180 200 220 VZ, ZENER VOLTAGE @IZT (VOLTS) 120 TL,LEAD TEMPERATURE TA, AMBIENT TEMPERATURE Fig. 1-POWER TEMPERATURE DERATING CURVE Fig. 2-TEMPERATURE COEFFICIENT-RANGE FOR UNITS 6 TO 51 VOLTS T = 25 IZ, ZENER CURRENT (mA) IZ, ZENER CURRENT (mA) 1000 TC = 25 1000 100 10 1 0.1 1 2 3 4 5 6 7 8 9 T = 25 100 10 1 10 0.1 VZ, ZENER VOLTAGE (VOLTS) 10 20 30 40 50 60 70 80 VZ, ZENER VOLTAGE (VOLTS) Fig. 3-ZENER VOLTAGE VERSUS ZENER CURRENT VZ = 6.8 THRU 10 VOLTS Revision: J Fig. 4-ZENER VOLTAGE VERSUS ZENER CURRENT VZ = 11 THRU 51 VOLTS www.mccsemi.com 4 of 5 2014/09/09 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: J www.mccsemi.com 5 of 5 2014/09/09