SR3010

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# SR305 THRU SR3010 3 Amp Schottky Barrier Rectifier 50 to 100 Volts DO-201AD • Features • • • • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Low Forward Voltage Drop andLow Switching Noise High Current Capability and High Surge Current Capability Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 • • • Maximum Ratings Operating Temperature: -55 °C to +125°C Storage Temperature: -55°C to +150°C Maximum Thermal Resistance; 30 °C/W Junction To Ambient Device Marking Maximum Recurrent Peak Reverse Voltage 50V 60V 80V 100V Maximum RMS Voltage Maximum DC Blocking Voltage 50V 60V 80V 100V MCC Catalog Number D SR305 SR306 SR308 SR3010 --------- 35V 42V 56V 70V A Cathode Mark B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage SR305-306 SR308-3010 Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance IF(AV) IFSM 3.0A 80A TA = 85°C 8.3ms, half sine D C VF .72V .85V 1.0mA 30mA 200pF IFM = 3.0A; TJ = 25°C(Note 2) TJ = 25°C TJ = 100°C Measured at 1.0MHz, VR=4.0V DIMENSIONS INCHES MIN .287 .189 .048 1.000 MM MIN 7.30 4.80 1.20 25.40 IR DIM A B C D MAX .374 .208 .052 --- MAX 9.50 5.30 1.30 --- NOTE CJ Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. 2.Pulse test: Pulse width 300 µsec, Duty cycle 1% www.mccsemi.com Revision: A 1 of 3 2011/01/01 SR305 thru SR3010 Figure 1 Typical Forward Characteristics 20 10 6 4 2 SR305-SR306 Amps 1 .6 .4 1 .2 25°C .1 .06 .04 .02 .01 .2 .4 .6 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts .8 1.0 1.2 90 75 60 45 Amps 30 15 5 0 0 SR308-SR3010 Amps 2 4 6 MCC Figure 2 Micro Commercial Components Forward Derating Curve 5 TM 3 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 50 75 100 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C Figure3 Maximum Non-Repetitive Forward Surge Current 125 150 175 1 2 4 6 8 10 Cycles 20 40 60 80 100 Figure 4 Junction Capacitance 100 60 0 40 0 200 pF 10 6 4 0 20 10 .1 .2 .4 1 2 Volts 4 10 20 4 0 100 200 400 100 0 Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles TJ=25° C Junction Capacitance - pF versus www.mccsemi.com Revision: A 2 of 3 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 1.2Kpcs/Reel Ammo Packing: 1.2Kpcs/Ammo Box Bulk: 12Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 3 of 3 2011/01/01