KSK-1A71-6-2020

MEDER electronic CHARACTERISTICS • • • • Glass length of 16.5 mm and diameter of 2.8 mm Normally open 1 Form A contact Carry current up to 1 A 300 VAC breakdown voltage KSK-1A71/6-... All dimensions in mm [inches] DIMENSIONS 16.5 [0.650] ø0.5 [0.019] ø2.8 [0.110] 22.05 [0.868] 44.1 [1.736] CONTACT DATA All Data at 20 oC Contact Ratings Switching Power * Switching Voltage Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance cross Contacts Breakdown Voltage Release Time incl. Bounce Release Time Capacitance Test Coil ** Standard AT range Switch Model → Contact Form → Conditions Any combination of V and A not to exceed their individual max.’s DC AC DC or peak AC DC or peak AC at 0.5 V & 10 mA measured w/ 0.5 V & 50 mA, 1.5 ms after closure 100 Volts applied > 60 sec. 40 % overdrive measured with/ no coil excitation at 10 kHz across contact KSK-1A71/6-... Form A Min. Typ. Max. 10 320 230 0.4 1.0 100 200 1 300 0.8 0.05 0.3 KMS-01 15 60 AT Units W VDC VAC A A mΩ mΩ GΩ VAC ms ms pF Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sine wave for 11 ms 10 - 2000 Hz max. 10 oC / minute allowance max. 10 oC / minute allowance 5 sec. dwell -20 -55 50 20 130 130 260 g g o C C C o o Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch. * For life expectancy see our test section on Page 112. ** See our test section on Page 116. ORDER INFORMATION Series KSK Options Contact Form 1A Switch Model 71/6 AT Range (between) xxxx 20 -70 Part Number Example - KSK - 1A71/6 - 2030 2030 is the pull in AT range (Any AT can be ordered between 20 & 30 in a minimum range of +/-2 AT) www.meder.com 103