2KBP10G

SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER 2KBP005G THRU 2KBP10G FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 20 Ampere KBPG 0.125× 45 (3.2) O Plastic package has UL flammability Glassification 94V-0 Glass passivated chip junction High case dielectric strength of 1500VRMS High surge current capability High temperature soldering guaranteed: 260℃/10 seconds, 0.375”(9.5mm) lead length 0.600(15.24) 0.560(14.22) 0.500(12.70) 0.460(11.68) 0.460(11.68) 0.420(10.67) + 0.60 (15.2) MIN. ~ 0.50 (12.7) MIN MECHANICAL DATA • • • • Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any Weight: 0.069 ounce, 1.95 gram 0.034(0.86) 0.028(0.71) DIA. 0.200(5.08) 0.180(4.57) 0.060 0.160(4.1) (1.52) 0.140(3.6) 0.105(2.67) 0.085(2.16) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% 2KBP 2KBP SYMBOLS 005G 01G Maximum Reverse Peak Repetitive Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Output At TC=65℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 2.0A TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Typical Junction Capacitance per leg (Note 1) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range 2KBP 02G 200 140 200 2KBP 04G 400 280 400 2.0 60 15 1.1 2KBP 06G 600 420 600 2KBP 08G 800 560 800 2KBP 10G 1000 700 1000 UNIT Volts Volts Volts Amps Amps A2s Volts μA pF ℃/W ℃ ℃ I(AV) IFSM I2 t VF IR CJ RΘJC TJ , TSTG 5.0 250 20 28 (-55 to +150) (-55 to +150) Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0 V 2.Unit mounted on P.C. board with 0.47’×0.47” (12×12mm) copper pads,375”(9.5mm) lead lengh E-mail: sales@cnmic.com Web Site: www.cnmic.com SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER 2KBP005G THRU 2KBP10G VOLTAGE RANGE CURRENT 50 to 1000 Volts 2.0 Ampere RATINGS AND CHARACTERISTIC CURVES 2KBP005G THRU 2KBP10G FIG. 1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 3.0 70 60 50 40 30 20 10 0 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER ELEMENT AVERAGE FORWARD OUTPUT, CURRENT,(A) PEA K FORWA RD SURGE, CURRENT,(A) 2.0 8.3ms Single Half Sine-Wave (JEDEC Method )Tj =T j max 1.0 Single Phase Half wave 60Hz Resistive or Inductive Load 0.375"(9.5MM) Lead Length 1 CYCLE 1 2 4 6 8 10 20 40 60 80 100 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ℃ FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS FORWARD CURRENT, (A) 20 10 10 NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 1.0 INSTANTANEOUS FREVERSE CURRENT, (μ A ) 1.0 Tj =100℃ 0.1 Tj =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 0.01 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 Tj =25℃ 0.01 JUNCTION CAPACITANCE,(pF) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( %) 10 Tj =25℃ f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVRESE VOLTAGE,(V ) E-mail: sales@cnmic.com Web Site: www.cnmic.com