LPR502

PRESS FIT AUTOMOTIVE RECTIFIER (LUCAS) LPR501 THRU LPR506 TECHNICAL SPECIFICATION： FEATURES • • • • VOLTAGE RANGE CURRENT 100 to 600 Volts 50.0 Amperes LC-1 0.050± 0.002 (Φ 1.28±0.05) Low Leakage Low forward voltage drop High current capability High forward surge current capacity 0.333 8.45MAX Positive Negative 0.872± 0.01 21.00± 0.26 1.02± 0.01 26.00± 0.26 MECHANICAL DATA • • • • • • 0.133-0.149 (3.40-3.80) 0.39(9.95) Technology: Glass passivated chip with vacuum soldered Case: Copper case Polarity: As marked of case bottom Lead: Plated lead , solderable per MIL-STD-202E method 208C Mounting: Press Fit Weight: 0.23 ounces, 6.58 grams 0.397-0.399 10.09-10.15 Epoxy Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS LPR501 100 70 100 LPR502 200 140 200 LPR503 300 210 300 50 LPR504 400 280 400 LPR506 600 420 600 UNIT Volts Volts Volts Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=105℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Rating for fusing (t＜8.3ms) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage Typical Thermal Resistance Operating and Storage Temperature Range TA=100℃ VRRM VRMS VDC I(AV) IFSM I2t VF IR RθJC TJ,TSTG 600 1494 1.05 5.0 450 0.8 (-65 to +175) Amps A2S Volts UA ℃/W ℃ Notes: 1. Enough heatsink must be considered in application. E-mail: sales@cnmic.com Web Site: www.cnmic.com PRESS FIT AUTOMOTIVE RECTIFIER (LUCAS) LPR501 THRU LPR506 VOLTAGE RANGE CURRENT 100 to 600 Volts 50.0 Amperes RATINGS AND CHARACTERISTIC CURVES LPR501 THRULPR506 F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE AVERAGE FORWARD CURRENT, (A) F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 50 40 30 Single Phase 20 10 0 0 25 50 75 100 125 150 175 Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 600 8.3ms Single Half Sine-Wave 500 400 300 200 100 1 Cycle (JEDEC Method) Tj=Tj max AMBIENT TEMPERATURE, (℃) 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60 Hz F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) 80 INSTANTANEOUS FORWARD CURRENT, (A) 100 50 SQUARE WAVE DC 30 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 1.0 0 0 20 30 40 50 60 AVERAGE FORWARD CURRENT, (A) 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com