LM4040CIM3-5.0

LM4040/4041 Micrel LM4040/4041 Precision Micropower Shunt Voltage Reference General Description Ideal for space critical applications, the LM4040 and LM4041 precision voltage references are available in the subminiature (3mm × 1.3mm) SOT-23 surface-mount package. The LM4040 is the available in fixed reverse breakdown voltages of 2.500V, 4.096V and 5.000V. The LM4041 is available with a fixed 1.225V or an adjustable reverse breakdown voltage. The LM4040 and LM4041’s advanced design eliminates the need for an external stabilizing capacitor while ensuring stability with any capacitive load, making them easy to use. The minimum operating current ranges from 60µA for the LM4041-1.2 to 74µA for the LM4040-5.0. LM4040 versions have a maximum operating current of 15mA. LM4041 versions have a maximum operating current of 12mA. The LM4040 and LM4041 utilizes zener-zap reverse breakdown voltage trim during wafer sort to ensure that the prime parts have an accuracy of better than ± 0.1% (A grade) at 25°C. Bandgap reference temperature drift curvature correction and low dynamic impedance ensure stable reverse breakdown voltage accuracy over a wide range of operating temperatures and currents. Features • • • • Small SOT-23 package No output capacitor required Tolerates capacitive loads Fixed reverse breakdown voltages of 1.225, 2.500V, 4.096V and 5.000V • Adjustable reverse breakdown version • Contact Micrel for parts with extended temperature range. Key Specifications • Output voltage tolerance (A grade, 25°C) .. ± 0.1% (max) • Low output noise (10Hz to 100Hz) LM4040 ................................................ 35µVRMS (typ) LM4041 ................................................ 20µVRMS (typ) • Wide operating current range LM4040 ................................................ 60µA to 15mA LM4041 ................................................ 60µA to 12mA • Industrial temperature range .................. –40°C to +85°C • Low temperature coefficient ................ 100ppm/°C (max) Applications • • • • • • • • Battery-Powered Equipment Data Acquisition Systems Instrumentation Process Control Energy Management Product Testing Automotive Electronics Precision Audio Components Typical Applications VS VS RS VR LM4040 LM4041 I Q + IL IL IQ RS VR VO VO R1 VO = 1.233 (R2/R1 + 1) LM4041 Adjustable R2 Figure 1. LM4040, LM4041 Fixed Shunt Regulator Application Figure 2. LM4041 Adjustable Shunt Regulator Application Micrel, Inc. • 1849 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 944-0970 • http://www.micrel.com January 2000 1 LM4040/4041 LM4040/4041 Micrel Pin Configuration + – 1 3 FB + 1 3– 2 2 Pin 3 must float or be connected to pin 2. Fixed Version SOT-23 (M3) Package Top View Adjustable Version SOT-23 (M3) Package Top View Ordering Information Part Number * LM4040AIM3-2.5 LM4040BIM3-2.5 LM4040CIM3-2.5 LM4040DIM3-2.5 LM4040AIM3-4.1 LM4040BIM3-4.1 LM4040CIM3-4.1 LM4040DIM3-4.1 LM4040AIM3-5.0 LM4040BIM3-5.0 LM4040CIM3-5.0 LM4040DIM3-5.0 Voltage 2.500V 2.500V 2.500V 2.500V 4.096V 4.096V 4.096V 4.096V 5.000V 5.000V 5.000V 5.000V Accuracy, Temp. Coefficient ± 0.1%, 100ppm/°C ± 0.2%, 100ppm/°C ± 0.5%, 100ppm/°C ± 1.0%, 150ppm/°C ± 0.1%, 100ppm/°C ± 0.2%, 100ppm/°C ± 0.5%, 100ppm/°C ± 1.0%, 150ppm/°C ± 0.1%, 100ppm/°C ± 0.2%, 100ppm/°C ± 0.5%, 100ppm/°C ± 1.0%, 150ppm/°C Part Number * LM4041AIM3-1.2 LM4041BIM3-1.2 LM4041CIM3-1.2 LM4041DIM3-1.2 LM4041CIM3-ADJ LM4041DIM3-ADJ Voltage 1.225V 1.225V 1.225V 1.225V 1.24V to 10V 1.24V to 10V Accuracy, Temp. Coefficient ±0.1%, 100ppm/°C ±0.2%, 100ppm/°C ±0.5%, 100ppm/°C ±1.0%, 150ppm/°C ±0.5%, 100ppm/°C ±1.0%, 150ppm/°C SOT-23 Package Markings Example R__ Field 1st Character Code R = Reference Example _2_ Field Code Example __A Field 3rd Character Code A = ± 0.1% B = ± 0.2% C = ±0.5% D = ±1.0% 2nd Character 1 = 1.225V 2 = 2.500V 4 = 4.096V 5 = 5.000V A = Adjustable Example: R2C represents Reference, 2.500V, ± 0.5% (LM4040CIM3-2.5) Note: If 3rd character is omitted, container will indicate tolerance. LM4040/4041 2 January 2000 LM4040/4041 Micrel Functional Diagram LM4040, LM4041 Fixed Functional Diagram LM4041 Adjustable + + VREF FB Absolute Maximum Ratings Reverse Current ......................................................... 20mA Forward Current ......................................................... 10mA Maximum Output Voltage LM4041-Adjustable ................................................... 15V Power Dissipation at TA = 25°C (Note 2) ................ 306mW Storage Temperature ............................... –65°C to +150°C Lead Temperature Vapor phase (60 seconds) .............................. +215°C Infrared (15 seconds) ...................................... +220°C ESD Susceptibility Human Body Model (Note 3) ................................. 2kV Machine Model (Note 3) ...................................... 200V Operating Ratings (Notes 1 and 2) Temperature Range (TMIN ≤ TA ≤ TMAX) .......................... –40°C ≤ TA ≤ +85°C Reverse Current LM4040-2.5 .......................................... 60µA to 15mA LM4040-4.1 .......................................... 68µA to 15mA LM4040-5.0 .......................................... 74µA to 15mA LM4041-1.2 .......................................... 60µA to 12mA LM4041-ADJ ........................................ 60µA to 12mA Output Voltage Range LM4041-ADJ .......................................... 1.24V to 10V January 2000 3 LM4040/4041 LM4040/4041 Micrel LM4040-2.5 Electrical Characteristics Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A, B, C, and D designate initial Reverse Breakdown Voltage tolerance of ± 0.1%, ± 0.2%, ± 0.5%, and ± 1.0 respectively. LM4040AIM3 LM4040BIM3 LM4040CIM3 Symbol Parameter Conditions Typical (Note 4) 2.500 ±2.5 ±19 45 60 65 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 20 15 15 0.3 0.8 1.0 2.5 0.6 8.0 0.3 0.8 35 120 0.8 0.9 0.6 8.0 0.6 8.0 0.8 1.0 0.8 1.0 100 60 65 100 60 65 100 ±5.0 ±21 ±12 ±29 Limits (Note 5) Limits (Note 5) Limits (Note 5) Units (Limit) V mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA IRMIN Minimum Operating Current ∆VR/∆T ∆VR/∆IR 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA LM4040DIM3 Symbol Parameter Conditions Typical (Note 4) 2.500 ±25 ±49 45 65 70 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 20 15 15 0.3 1.0 1.2 2.5 8.0 10.0 0.3 1.1 35 120 150 Limits (Note 5) Units (Limit) V mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA IRMIN Minimum Operating Current ∆VR/∆T ∆VR/∆IR 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA LM4040/4041 4 January 2000 LM4040/4041 Micrel LM4040-4.1 Electrical Characteristics Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A, B, C, and D designate initial Reverse Breakdown Voltage tolerance of ± 0.1%, ± 0.2%, ± 0.5%, and ± 1.0% respectively. LM4040AIM3 Symbol Parameter Conditions Typical (Note 4) 4.096 ±4.1 ±31 50 68 73 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 30 20 20 0.5 0.9 1.2 3.5 7.0 10.0 0.5 1.0 80 120 1.0 7.0 10.0 0.9 1.2 100 68 73 100 ±8.2 ±35 Limits (Note 5) LM4040BIM3 Limits (Note 5) Units (Limit) V mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA IRMIN Minimum Operating Current ∆VR/∆T ∆VR/∆IR 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA LM4040CIM3 Symbol Parameter Conditions Typical (Note 4) 4.096 ±20 ±47 50 68 73 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 30 20 20 0.5 0.9 1.2 3.0 7.0 10.0 0.5 1.0 80 120 100 Limits (Note 5) LM4040DIM3 Limits (Note 5) ±41 ±81 73 78 150 Units (Limits) V mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA IRMIN Minimum Operating Current ∆VR/∆T ∆VR/∆IR 1.2 1.5 9.0 13.0 1.3 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA January 2000 5 LM4040/4041 LM4040/4041 Micrel LM4040-5.0 Electrical Characteristics Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A, B, C, and D designate initial Reverse Breakdown Voltage tolerance of ± 0.1%, ± 0.2%, ± 0.5%, and ± 1.0% respectively. LM4040AIM3 Symbol Parameter Conditions Typical (Note 4) 5.000 ±5.0 ±38 54 74 80 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 30 20 20 0.5 1.0 1.4 3.5 8.0 12.0 0.5 1.1 80 120 1.1 8.0 12.0 1.0 1.4 100 74 80 100 Limits (Note 5) LM4040BIM3 Limits (Note 5) ±10 Units (Limit) V VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA ±43 mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm IRMIN Minimum Operating Current ∆VR/∆T ∆VR/∆IR 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA LM4040CIM3 Symbol Parameter Conditions Typical (Note 4) 5.000 ±25 ±58 54 74 80 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 30 20 20 0.5 1.0 1.3 3.5 8.0 12.0 0.5 1.1 80 120 100 Limits (Note 5) LM4040DIM3 Limits (Note 5) ±50 ±99 79 85 150 Units (Limits) V mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA IRMIN Minimum Operating Current ∆VR/∆T ∆VR/∆IR 1.3 1.8 10.0 15.0 1.5 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA LM4040/4041 6 January 2000 LM4040/4041 Micrel LM4040 Typical Characteristics Temperature Drift for Different Average Temperature Coefficient +0.5 IR = 150µA +0.4 +0.3 +0.2 12ppm/°C +0.1 0 -0.1 -0.2 -22ppm/°C -0.3 -51ppm/°C -0.4 -0.5 -40 -20 0 20 40 60 80 100 TEMPERATURE (°C) 1k Output Impedance vs. Frequency TJ = 25 °C, ∆ IR = 0.1 IR Output Impedance vs. Frequency 1k IR= 1mA TJ = 25 °C, ∆IR = IR CL= 0 VR = 5V 2.5V 1 CL= 1µF TANTALUM IR = IRMIN + 100 µA VR CHANGE (%) IMPEDANCE (Ω) VR = 5V 10 2.5V CL = 0 CL = 1µF TANTALUM IMPEDANCE (Ω) 100 100 10 1 XCL 0.1 100 1k 10k 100k FREQUENCY (Hz) 1M 0.1 100 1k 10k 100k 1M FREQUENCY (Hz) Reverse Characteristics and Minimum Operating Current 2.5V 4.1V 5V 120 10.0 • Noise Voltage vs. Frequency IR = 200µA TJ = 25°C REVERSE CURRENT (µA) 100 80 60 40 20 0 0 Noise (µV/ √Hz ) ed nte ara Gu uffix ix IN D S , Suff I RM ,C ,B •A 5.0 2.0 1.0 0.5 0.2 0.1 1 • • ical Typ 5V 2.5V TJ = 25°C 2 4 6 8 10 10 100 1k 10k 100k REVERSE VOLTAGE (V) FREQUENCY (Hz) RS VIN 1Hz rate VR LM4040 Test Circuit LM4040-2.5 VIN (V) RS = 30k VIN (V) 10 0 LM4040-5.0 RS = 30k 5 0 IJ = 25°C TJ = 25°C 6 6 VR (V) 2 0 0 20 40 60 RESPONSE TIME (µs) 80 VR (V) 4 4 2 0 0 100 200 300 400 RESPONSE TIME (µs) January 2000 7 LM4040/4041 LM4040/4041 Micrel LM4041-1.2 Electrical Characteristics Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25°C. The grades A, B, C, and D designate initial Reverse Breakdown Voltage tolerance of ± 0.1%, ± 0.2%, ± 0.5%, and ± 1.0%, respectively. LM4041AIM3 LM4041BIM3 LM4041CIM3 Symbol Parameter Conditions Typical (Note 4) 1.225 ±1.2 ±9.2 45 60 65 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 20 15 15 0.7 1.5 2.0 4.0 6.0 8.0 0.5 1.5 20 120 1.5 1.5 6.0 8.0 6.0 8.0 1.5 2.0 1.5 2.0 60 65 60 65 Limits (Note 5) Limits (Note 5) ±2.4 Limits (Note 5) ±6 Units (Limit) V VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA ±10.4 ±14 mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm IRMIN Minimum Operating Current ∆VR/∆T ±100 ±100 ±100 ∆VR/∆IR 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA LM4041DIM3 Symbol Parameter Conditions Typical (Note 4) 1.225 ±12 ±24 45 65 70 Average Reverse Breakdown Voltage Temperature Coefficient Reverse Breakdown Voltage Change with Operating Current Change IR = 10mA IR = 1mA IR = 100µA IRMIN ≤ IR 1mA 20 15 15 0.3 2.0 2.5 2.5 8.0 10.0 0.3 2.0 35 120 Limits (Note 5) LM4041EIM3 Limits (Note 5) ±25 ±36 65 70 Units (Limit) V mV (max) mV (max) µA µA (max) µA (max) ppm/°C ppm/°C (max) ppm/°C (max) mV mV (max) mV (max) mV mV (max) mV (max) Ω Ω (max) µVRMS ppm VR Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IR = 100µA IR = 100µA IRMIN Minimum Operating Current ∆VR/∆T ±150 ±150 ∆VR/∆IR 2.0 2.5 8.0 10.0 2.0 1mA ≤ IR 15mA ZR eN ∆VR Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long Term Stability IR = 1mA, f = 120Hz IAC = 0.1 IR IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA LM4040/4041 8 January 2000 LM4040/4041 Micrel LM4041-Adjustable Electrical Characteristics Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TJ = 25°C unless otherwise specified (SOT-23, see Note 7), IRMIN ≤ IR < 12mA, VREF ≤ VOUT ≤ 10V. The grades C and D designate initial Reverse Breakdown Voltage tolerance of ± 0.5% and ± 1%, respectively for VOUT = 5V. LM4041CIM3 Symbol Parameter Conditions Typical (Note 4) 1.233 ±6.2 ±14 45 60 65 Reference Voltage Change with Operating Current Change IRMIN ≤ IR 1mA SOT-23: VOUT ≥ 1.6V (Note 7) 1mA ≤ IR 15mA SOT-23: VOUT ≥ 1.6V (Note 7) ∆VREF /∆VO IFB Reference Voltage Change with Output Voltage Change Feedback Current IR = 1mA 0.7 1.5 2.0 2 4 6 –1.3 –2.0 –2.5 60 100 120 Average Reference Voltage Temperature Coefficient (Note 8) Dynamic Output Impedance VOUT = 5V IR = 10mA IR = 1mA IR = 100µA IR = 1mA, f = 120Hz IAC = 0.1 IR VOUT = VREF VOUT = 10V IR = 100µA 10Hz ≤ f ≤ 10kHz t = 1000hrs T = 25°C ±0.1°C IR = 100µA 20 15 15 150 200 –2.5 –3.0 6 8 2.0 2.5 65 70 ±12 Limits (Note 5) LM4041DIM3 Limits (Note 5) Units (Limit) V mV (max) mV (max) µA µA (max) µA (max) mV mV (max) mV (max) mV mV (max) mV (max) mV/V mV/V (max) mV/V (max) nA nA (max) nA (max) ppm/°C ppm/°C (max) ppm/°C (max) VREF Reference Breakdown Voltage Reference Breakdown Voltage Tolerance (Note 8) IR = 100µA VOUT = 5V IR = 100µA ±24 IRMIN Minimum Operating Current ∆VREF /∆IR ∆VREF /∆T ±100 ±150 ZOUT 0.3 2 20 120 Ω Ω (max) µVRMS ppm eN ∆VREF Wideband Noise Reference Voltage Long Term Stability January 2000 9 LM4040/4041 LM4040/4041 Micrel LM4040 and LM4041 Electrical Characteristic Notes Note 1. Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specification and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by TJMAX (maximum junction temperature), θJA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDMAX = (TJMAX – TA)/θJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040 and LM4041, TJMAX = 125°C, and the typical thermal resistance (θJA), when board mounted, is 326°C/W for the SOT-23 package. The human body model is a 100pF capacitor discharged through a 1.5kΩ resistor into each pin. The machine model is a 200pF capacitor discharged directly into each pin. Typicals are at TJ = 25°C and represent most likely parametric norm. Limits are 100% production tested at 25°C. Limits over temperature are guaranteed through correlation using Statistical Quality Control (SQL) methods. The boldface (over temperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance ± [(∆VR/∆T)(65°C)(VR)]. ∆VR/∆T is the VR temperature coefficient, 65°C is the temperature range from –40°C to the reference point of 25°C, and VR is the reverse breakdown voltage. The total over temperature tolerance for the different grades follows: A-grade: ± 0.75% = ± 0.1% ±100ppm/°C × 65°C B-grade: ± 0.85% = ± 0.2% ±100ppm/°C × 65°C C-grade: ± 1.15% = ±0.5% ± 100ppm/°C × 65°C D-grade: ± 1.98% = ±1.0% ± 150ppm/°C × 65°C Example: The A-grade LM4040-2.5 has an over temperature Reverse Breakdown Voltage tolerance of ± 2.5 × 0.75% = ± 19mV. Note 7. Note 8. When VOUT ≤ 1.6V, the LM4041-ADJ must operate at reduced IR. This is caused by the series resistance of the die attach between the die (–) output and the package (–) output pin. See the Output Saturation curve in the Typical Performance Characteristics section. Reference voltage and temperature coefficient will change with output voltage. See Typical Performance Characteristics curves. Note 2. Note 3. Note 4. Note 5. Note 6. LM4041 Typical Characteristics Temperature Drift for Different Average Temperature Coefficient +0.5 IR = 150µA +0.4 LM4041-1.2 +0.3 +0.2 12ppm/°C +0.1 0 -0.1 -0.2 -22ppm/°C -0.3 -51ppm/°C -0.4 -0.5 -40 -20 0 20 40 60 80 100 TEMPERATURE (°C) 1k Output Impedence vs. Frequency TJ = 25° C ∆IR = 0.1IR LM4041-1.2 1000 800 600 400 200 XC 100 1k 10k 100k FREQUENCY (Hz) 1M 0 1 Voltage Impedance IR = 200µA TJ = 25°C LM4041-1.2 LM4041-ADJ: VOUT = VREF VR CHANGE (%) IMPEDANCE (Ω) CL= 0 10 IR = 150µA 1 I = 1mA R 0.1 CL= 1µF TANTALUM NOISE (nV/ √Hz ) 100 10 100 1k 10k 100k FREQUENCY (Hz) Reverse Characteristics and Minimum Operating Current 100 100 Reverse Characteristics and Minimum Operating Current REVERSE CURRENT (µA) REVERSE CURRENT (µA) RS 30k 80 60 40 20 0 Typical TJ = 25°C LM4041-1.2 0 0.4 0.8 1.2 1.6 2.0 80 60 40 20 0 Typical TJ = 25°C LM4041-1.2 0 0.4 0.8 1.2 1.6 2.0 VIN 1Hz rate V LM4041-1.2 R Test Circuit REVERSE VOLTAGE (V) REVERSE VOLTAGE (V) LM4040/4041 10 January 2000 LM4040/4041 Micrel LM4041 Typical Characteristics Reference Voltage vs. Output Voltage and Temperature 1.244 REFERENCE VOLTAGE (V) Reference Voltage vs. Temperature and Output Voltage 1.244 REFERENCE VOLTAGE (V) Feedback Current vs. Output Voltage and Temperature 100 80 FEEDBACK (nA) 25°C 1.240 1.236 -40°C 1.232 1.228 1.224 1.220 0 85°C LM4041-ADJ 1.240 1.236 1.232 1.228 1.224 LM4041-ADJ IR = 1mA VOUT = VREF LM4041-ADJ TJ = 85°C 60 40 20 0 0 2 4 6 8 OUTPUT VOLTAGE (V) 10 TJ = 25°C, -40°C -40°C 85°C VOUT = 5V VOUT = 10V 2 4 6 8 OUTPUT VOLTAGE (V) 10 1.220 -40 -20 0 20 40 60 80 100 TEMPERATURE (°C) Output Saturation 1.7 Output Impedence vs. Frequency * 1K Output Impedence vs. Frequency * 1K LM4041-ADJ TJ = 25 °C IR = 1mA ∆IR = 0.1 IR OUTPUT SATURATION (V) LM4041-ADJ 1.6 VADJ = VREF + 5µV IMPEDANCE (Ω) 1.5 1.4 1.3 1.2 1.1 1.0 0 2 4 6 8 10 12 25°C -40°C 85°C IMPEDANCE (Ω) 100 LM4041-ADJ TJ = 25 °C IR = 1mA ∆IR = 0.1IR CL = 0 VOUT = 10V CL = 0 100 VOUT = 10V 10 5V 2.5V 1.23V 10 CL=1µF XC 5V 2.5V 1.23V CL=1µF 1 1 XC 0 100 1k 10k 100k 1M 0 100 1k 10k 100k 1M OUTPUT CURRENT (mA) FREQUENCY (Hz) FREQUENCY (Hz) Reverse Characteristics † 0 100 REVERSE CURRENT (µA) FB STEPS (V) 2 4 6 8 IR 80 60 40 20 0 (+) LM4041-ADJ FB V OUT ( – ) 2V / step V CL IR + – 120k FB TJ = 25°C LM4041-ADJ 0 2 4 6 8 10 OUTPUT VOLTAGE (V) † Reverse Characteristics Test Circuit * Output Impedance vs. Freq. Test Circuit Large Signal Response ‡ -40°C 10 LM4041-ADJ TJ = -40°C OUTPUT 25°C 85°C INPUT -40°C + 15V 5.1k INPUT 100k FB (+) LM4041 - ADJ VOUT (-) VOLTAGE (V) 8 6 4 2 0 0 10 20 30 40 RESPONSE TIME (µs) ‡ Large Signal Response Test Circuit January 2000 11 LM4040/4041 LM4040/4041 Micrel Adjustable Regulator The LM4041-ADJ’s output voltage can be adjusted to any value in the range of 1.24V through 10V. It is a function of the internal reference voltage (VREF) and the ratio of the external feedback resistors as shown in Figure 2. The output is found using the equation (1) VO = VREF´ [ (R2/R1) + 1 ] where VO is the desired output voltage. The actual value of the internal VREF is a function of VO. The “corrected” VREF is determined by (2) VREF´ = VO (∆VREF / ∆VO) + VY where VO is the desired output voltage. ∆VREF / ∆VO is found in the Electrical Characteristics and is typically –1.3mV/V and VY is equal to 1.233V. Replace the value of VREF´ in equation (1) with the value found using equation (2). Note that actual output voltage can deviate from that predicted using the typical ∆VREF / ∆VO in equation (2); for Cgrade parts, the worst-case ∆VREF / ∆VO is –2.5mV/V and VY = 1.248V. The following example shows the difference in output voltage resulting from the typical and worst case values of ∆VREF / ∆VO: Let VO = +9V. Using the typical values of ∆VREF /∆VO , VREF is 1.223V. Choosing a value of R1 = 10kΩ, R2 = 63.272kΩ. Using the worst case ∆VREF / ∆VO for the C-grade and Dgrade parts, the output voltage is actually 8.965V and 8.946V respectively. This results in possible errors as large as 0.39% for the C-grade parts and 0.59% for the D-grade parts. Once again, resistor values found using the typical value of ∆VREF / ∆VO will work in most cases, requiring no further adjustment. Applications Information The LM4040 and LM4041 have been designed for stable operation without the need of an external capacitor connected between the (+) and (–) pins. If a bypass capacitor is used, the references remain stable. Schottky Diode LM4040-x.x and LM4041-1.2 in the SOT-23 package have a parasitic Schottky diode between pin 2 (–) and pin 3 (die attach interface connect). Pin 3 of the SOT-23 package must float or be connected to pin 1. LM4041-ADJs use pin 3 as the (–) output. Conventional Shunt Regulator In a conventional shunt regulator application (see Figure 1), an external series resistor (RS) is connected between the supply voltage and the LM4040-x.x or LM4041-1.2 reference. RS determines the current that flows through the load (IL) and the reference (IQ). Since load current and supply voltage may vary, RS should be small enough to supply at least the minimum acceptable IQ to the reference even when the supply voltage is at its minimum and the load current is at its maximum value. When the supply voltage is at its maximum and IL is at its minimum, RS should be large enough so that the current flowing through the LM4040-x.x is less than 15mA, and the current flowing through the LM4041-1.2 or LM4041-ADJ is less than 12mA. RS is determined by the supply voltage (VS), the load and operating current, (IL and IQ), and the reference’s reverse breakdown voltage (VR). Rs = (Vs – VR) / (IL + IQ) + FB 120k LM4041-ADJ D1 D1 R1 λ + FB R1 120k R2 1M – λ R2 1M LM4041– ADJ < –12V R3 LED ON 200 –5V > –12V R3 LED ON 330 –5V Figure 3. Voltage Level Detector Figure 4. Voltage Level Detector LM4040/4041 12 January 2000 LM4040/4041 VIN I R2 50µA R1 VOUT D1 1N914 D2 1N914 + LM4041-ADJ – FB R3 240k LM4041-ADJ + FB Micrel VIN I R1 R2 510k – FB + R3 510k VOUT D2 1N457 LM4041-ADJ R4 240k – D1 1N457 Figure 5. Fast Positive Clamp 2.4V + ∆VD1 Figure 6. Bidirectional Clamp ±2.4V VIN I R1 VOUT R2 390k R3 500k FB R4 390k D1 1N457 FB – + D2 1N457 LM4041-ADJ LM4041-ADJ + – I VIN R1 VOUT R2 330k FB R3 1M D2 1N457 + LM4041-ADJ – FB – + LM4041-ADJ D1 1N457 R4 330k Figure 7. Bidirectional Adjustable Clamp ±18V to ±2.4V 0 to 20mA Figure 8. Bidirectional Adjustable Clamp ±2.4 to ±6V + 5V R1 390Ω ± 2% D1* + FB λ LM4041-ADJ – 1 2 3 6 5 4 N.C. CMOS R2 470k 1N4002 D2 N.C. I THRESHOLD = 4N28 1.24V 5µA + = 3.2mA R1 4N28 GAIN Figure 9. Floating Current Detector January 2000 13 LM4040/4041 LM4040/4041 Micrel +15V + LM4041-ADJ – R1 FB 2N2905 R2 120k 2N 3964 1µA < IOUT = 100mA 1.24V I OUT = R1 Figure 10. Current Source 0 to 20 mA R1 332Ω ±1% D2 1N4002 +5V + FB 1N914 2N2222 LM4041-ADJ – R3 100k 1 6 5 4 4N28 R4 10M R2 22k D1* λ 2 CMOS 3 N.C. 1.24V = 3.7mA ± 2% I THRESHOLD = R1 Figure 11. Precision Floating Current Detector * D1 can be any LED, VF = 1.5V to 2.2V at 3mA. D1 may act as an indicator. D1 will be on if ITHRESHOLD falls below the threshold current, except with I = O. LM4040/4041 14 January 2000 LM4040/4041 Micrel Package Information C L C L 1.40 (0.055) 2.50 (0.098) 1.19 (0.047) 2.10 (0.083) 2.36 (0.093) 2.28 (0.090) 3.05 (0.120) 2.67 (0.105) DIMENSIONS: MM (INCH) 1.15 (0.045) 0.76 (0.030) 8° 0° 0.15 (0.006) 0.076 (0.0030) 0.445 (0.0175) TYP 3 PLACES 0.10 (0.004) 0.013 (0.0005) 0.41 (0.016) 0.13 (0.005) SOT-23 (M3) January 2000 15 LM4040/4041 LM4040/4041 Micrel MICREL INC. TEL 1849 FORTUNE DRIVE SAN JOSE, CA 95131 FAX USA + 1 (408) 944-0800 + 1 (408) 944-0970 WEB http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. © 2000 Micrel Incorporated LM4040/4041 16 January 2000