TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
N-CHANNEL MOSFET
Qualified per MIL-PRF-19500/592 DEVICES LEVELS
2N7227
2N7227U
JAN JANTX JANTXV
ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted) Parameters / Test Conditions Drain – Source Voltage Gate – Source Voltage Continuous Drain Current TC = +25°C Continuous Drain Current TC = +100°C Max. Power Dissipation TC = +25°C Drain to Source On State Resistance Operating & Storage Temperature Symbol VDS VGS ID1 ID2 Ptl Rds(on) Top, Tstg Value 400 ± 20 14.0 9.0 150 (1) 0.315 (2) -55 to +150 Unit Vdc Vdc Adc Adc W Ω °C TO-254AA
Note: (1) Derated Linearly by 1.2 W/°C for TC > +25°C (2) VGS = 10Vdc, ID = 9A ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) Parameters / Test Conditions Drain-Source Breakdown Voltage VGS = 0V, ID = 1mAdc Gate-Source Voltage (Threshold) VDS ≥ VGS, ID = 0.25mA VDS ≥ VGS, ID = 0.25mA, Tj = +125°C VDS ≥ VGS, ID = 0.25mA, Tj = -55°C Gate Current VGS = ±20V, VDS = 0V VGS = ±20V, VDS = 0V, Tj = +125°C Drain Current VGS = 0V, VDS = 320V VGS = 0V, VDS = 320V, Tj = +125°C Static Drain-Source On-State Resistance VGS = 10V, ID = 9.0A pulsed VGS = 10V, ID = 14.0A pulsed Tj = +125°C VGS = 10V, ID = 9.0A pulsed Diode Forward Voltage VGS = 0V, ID = 14A pulsed Symbol V(BR)DSS VGS(th)1 VGS(th)2 VGS(th)3 IGSS1 IGSS2 IDSS1 IDSS2 rDS(on)1 rDS(on)2 rDS(on)3 VSD Min. 400 2.0 1.0 4.0 5.0 ±100 ±200 25 0.25 0.315 0.415 0.68 1.7 nAdc µAdc mAdc Ω Ω Ω Vdc U-PKG (U3) TO-276AB Max. Unit Vdc
Vdc
T4-LDS-0050 Rev. 2 (101154)
Page 1 of 4
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
DYNAMIC CHARACTERISTICS Parameters / Test Conditions Gate Charge: On-State Gate Charge Gate to Source Charge Gate to Drain Charge SWITCHING CHARACTERISTICS Parameters / Test Conditions Switching time tests: Turn-on delay time Rinse time Turn-off delay time Fall time Diode Reverse Recovery Time Symbol ID = 14A, VGS = 10Vdc, Gate drive impedance = 7.5Ω, VDD = 200Vdc di/dt ≤ 100A/µs, VDD ≤ 30V, IF = 14A td(on) tr td(off) tf trr Min. Max. 35 190 170 130 1200 Unit Symbol VGS = 10V, ID = 14A VDS = 50V Qg(on) Qgs Qgd Min. Max. 110 18 65 Unit nC
ns
ns
T4-LDS-0050 Rev. 2 (101154)
Page 2 of 4
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
PACKAGE DIMENSIONS
Dimensions
Ltr.
BL CH LD LL LO LS MHD MHO TL TT TW Term 1 Term 2 Term 3
Inches Min Max .535 .545 .249 .035 .510 .260 .045 .570
Millimeters Min Max 13.59 13.84 6.32 0.89 12.95 6.60 1.14 14.48
Note
.150 BSC .150 BSC .139 .665 .790 .040 .535 .149 .685 .800 .050 .545 Drain Source Gate
3.81 BSC 3.81 BSC 3.53 16.89 20.07 1.02 13.59 3.78 17.40 20.32 1.27 13.84 3, 4 3, 4
NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Glass meniscus included in dimension D and E. 4. All terminals are isolated from the case. 5. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 1. Physical dimensions for TO-254AA
T4-LDS-0050 Rev. 2 (101154)
Page 3 of 4
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
PACKAGE DIMENSIONS
Dimensions
Ltr.
BL BW CH LH LL1 LL2 LS1 LS2 LW1 LW2 Q1 Q2 Term 1 Term 2 Term 3
Inches Min Max .620 .630 .445 .010 .410 .152 .455 .142 .020 .420 .162
Millimeters Min Max 15.75 16.00 11.30 0.26 10.41 3.86 11.56 3.60 0.50 10.67 4.11
.210 BSC .105 BSC .370 .135 .030 .035 Drain Source Gate .380 .145
5.33 BSC 2.67 BSC 9.40 3.43 0.76 0.89 9.65 3.68
NOTES: 1. 2. 3. 4. Dimensions are in inches. Millimeters are given for information only. The lid shall be electrically isolated from the drain, gate and source. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 2. Dimensions and configuration of surface mount package outline (TO-276AB) 2N7224U, 2N7225U, 2N7227U, and 2N7228U.
T4-LDS-0050 Rev. 2 (101154)
Page 4 of 4