APT43M60B2 APT43M60L
600V, 45A, 0.15Ω Max
N-Channel MOSFET
Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability.
T-Max®
TO-264
APT43M60B2
APT43M60L
D
Single die MOSFET
G S
FEATURES
• Fast switching with low EMI/RFI • Low RDS(on) • Ultra low Crss for improved noise immunity • Low gate charge • Avalanche energy rated • RoHS compliant
TYPICAL APPLICATIONS
• PFC and other boost converter • Buck converter • Two switch forward (asymmetrical bridge) • Single switch forward • Flyback • Inverters
Absolute Maximum Ratings
Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25°C Continuous Drain Current @ TC = 100°C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive
1
Ratings 45 28 160 ±30 1200 21
Unit
A
V mJ A
Thermal and Mechanical Characteristics
Symbol PD RθJC RθCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25°C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) 0.22 Package Weight 6.2 10 Torque Mounting Torque ( TO-264 Package), 4-40 or M3 screw 1.1 MicrosemiWebsite-http://www.microsemi.com N·m -55 0.11 150 °C 300 oz g in·lbf
04-2009 050-8070 Rev D
Min
Typ
Max 780 0.16
Unit W °C/W
Static Characteristics
Symbol
VBR(DSS) ΔVBR(DSS)/ΔTJ RDS(on) VGS(th) ΔVGS(th)/ΔTJ IDSS IGSS
TJ = 25°C unless otherwise specified
Test Conditions
VGS = 0V, ID = 250µA Reference to 25°C, ID = 250µA VGS = 10V, ID = 21A VGS = VDS, ID = 2.5mA VDS = 600V VGS = 0V TJ = 25°C TJ = 125°C
APT43M60B2_L
Typ 0.57 0.13 4 -10 Max Unit V V/°C Ω V mV/°C µA nA
Parameter
Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance
3
Min 600
Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current
3
0.15 5 100 500 ±100
VGS = ±30V
Dynamic Characteristics
Symbol
gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf
4
TJ = 25°C unless otherwise specified
Test Conditions VDS = 50V, ID = 21A
VGS = 0V, VDS = 25V f = 1MHz
Parameter
Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related
Min
Typ 42 8590 90 800 420
Max
Unit S
pF
VGS = 0V, VDS = 0V to 400V
5
Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time
VGS = 0 to 10V, ID = 21A, VDS = 300V Resistive Switching VDD = 400V, ID = 21A RG = 4.7Ω 6 , VGG = 15V
220 215 45 90 48 55 145 44
nC
ns
Source-Drain Diode Characteristics
Symbol
IS ISM VSD trr Qrr dv/dt
Parameter
Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Peak Recovery dv/dt
Test Conditions
MOSFET symbol showing the integral reverse p-n junction diode (body diode)
Min
D
Typ
Max 45
Unit
G S
A 160 1 700 15.2 8 V ns µC V/ns
ISD = 21A, TJ = 25°C, VGS = 0V ISD = 21A 3 diSD/dt = 100A/µs, TJ = 25°C ISD ≤ 21A, di/dt ≤1000A/µs, VDD = 400V, TJ = 125°C
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 5.44mH, RG = 4.7Ω, IAS = 21A. 3 Pulse test: Pulse Width < 380µs, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -8.32E-8/VDS^2 + 3.49E-8/VDS + 1.30E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein. Rev D 050-8070
04-2009
APT43M60B2_L
160
V
GS
70
= 10V T = 125°C
140 ID, DRAIN CURRENT (A) 120 100
TJ = -55°C
J
V
GS
= 7&8V
60 ID, DRIAN CURRENT (A) 50 40 30 20 10 0
5.5V 6V
TJ = 25°C
80 60 40 20 0
TJ = 150°C TJ = 125°C
5V 4.5V
0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics
0
5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
3.0
NORMALIZED TO VGS = 10V @ 21A
160
VDS> ID(ON) x RDS(ON) MAX.
2.5 ID, DRAIN CURRENT (A)
140 120 100
250µSEC. PULSE TEST @