LX9507

A MICROSEMI
 COMPANY LX9507 Input Cable Assembly P R O D UC TI O N DATA S HEET
 The LX9507 is an input-connector cable assembly that is used to connect Linfinity’s standard line of backlight inverter products. The connector housing is interconnectable and compatible with PC boards mounted with the Molex* 53261 series 8-pin SMT header. The housing and pins are crimp-terminated to 6-inch (152.4mm) lengths of UL1061 AWG#26 wire. This cable assembly is designed to save users the job of obtaining housing, pin, wire, and crimp-tools in addition to the assembly of an evaluation board.  
Used for Interconnection of W W W . Microsemi . COM Backlight Inverter Connector (Molex 53261) to Power, Ground, and Control Signal
Generous 6-inch (152.4mm) Lead Length to accommodate Most Applications
Leads Color-Coded for Quick and Accurate Termination
Wire is 300 Volt Rated to 80°C, PVC Insulated and is Stranded in a 7X #34 Configuration IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com 
  1 2 3 4 5 6 7 8
  6.0 00in. ±0.250 152.4 0m m ±6.35
         1 2 3 4 5 6 7 8 Molex* 51021 Series Molex* 50079 Series UL 1061, 26 AWG, Red Wire UL 1061, 26 AWG, Black Wire UL 1061, 26 AWG, Orange Wire UL 1061, 26 AWG, Green Wire UL 1061, 26 AWG, White Wire UL 1061, 26 AWG, Violet Wire 1 2 3 4 5 6 7 8 Red Red Black Black Orange Green LX9507 LX9507 White Violet * Molex is a Registered Trademark of Molex, Inc.  
 LX9507 Copyright © 2000 Rev. 0.2,2000-09-22 Microsemi Linfinity Microelectronics Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1