SG55464YDESC

SG55451B/SG55461/SG55471 SG75451B/SG75461/SG75471 DUAL PERIPHERAL POSITIVE-AND DRIVER DESCRIPTION The SG5541B/SG55461/SG55471 (SG75451B/SG75461/SG75471) series of dual peripheral Positive-AND drivers are a family of versatile devices designed for use in systems that employ TTL or DTL logic. This family of drivers are direct replacements for the Texas Instruments SN55451B/61/71 (SN75451B/61/71)series. Diode-clamped inputs simplify circuit design. Typical applications include high-speed logic buffers, power drivers, relay drivers, MOS drivers, line drivers, and memory drivers. The SG55451B/SG55461/SG55471 drivers are characterized for operation over the full military ambient temperature range of -55°C to 125°C and the SG75451B/SG75461/SG75471 drivers are chracterized for operation from 0°C to 70°C. FEATURES • • • • • • 300mA output current capability High-voltage output No output latch-up at 20V High speed switching TTL or DTL compatible diode-clamped inputs Standard supply voltages HIGH RELIABILITY FEATURES - SG55451B/SG55461/SG55471 ♦ Available to MIL-STD-883 ♦ Scheduled for MIL-M-38510 QPL listing ♦ LMI level "S"processing available EQUIVALENT CIRCUIT SCHEMATIC (each driver) BLOCK DIAGRAM Positive Logic: Y = AB FUNCTION TABLE (each gate) A L L H H B L H L H Y L (on-state) L (on-state) L (on-state) H (off-state) H = High Level, L = Low Level 5/92 Rev 1.1 2/94 Copyright © 1994 1 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. SG55451B/61/71 SERIES ABSOLUTE MAXIMUM RATINGS (Note 1) Supply Voltage (VCC) ............................................................ 7V Input Voltage ..................................................................... 5.5V Interemitter Voltage ........................................................... 5.5V Off-state Output Voltage X5451B Series ................................................................ 30V X5461 Series .................................................................. 35V X5471 Series .................................................................. 70V Note 1. Exceeding these ratings could cause damage to the device. Output Current ............................................................. 400mA Continuous Total Dissipation at (or below) 25°C Free-Air Temperature ..................................... 800mW Operating Junction Temperature Hermetic (Y, L Packages) .......................................... 150°C Storage Temperature Range .......................... -65°C to 150°C Lead Temperature (1/16 inch from case for soldering 60 sec.) ................................................. 300°C THERMAL DATA Y Package: Thermal Resistance-Junction to Case, θ JC .................. 50°C/W Thermal Resistance-Junction to Ambient, θ JA ............ 130°C/W L Package: Thermal Resistance-Junction to Case, θ JC .................. 35°C/W Thermal Resistance-Junction to Ambient, θ JA ............ 120°C/W Note A. Junction Temperature Calculation: TJ = TA + (PD x θ JA). Note B. The above numbers for θJC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The θJA numbers are meant to be guidelines for the thermal performance of the device/pcboard system. All of the above assume no ambient airflow. RECOMMENDED OPERATING CONDITIONS (Notes 2 & 3) Supply Voltage (VCC) SG55451B, SG55461, SG55471 ....................... 4.5V to 5.5V SG75451B, SG75461, SG75471 ................... 4.75V to 5.25V Operating Ambient Temperature Range SG55451B, SG55461, SG55471 ................... -55°C to 125°C SG75451B, SG75461, SG75471 ........................ 0°C to 70 °C Note 2. Range over which device is functional. Note 3. The substrate (pin 8) must always be at the most-negative device voltage for proper operation. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG55451B/461/471 with -55°C ≤ TA ≤ 125 °C, and SG75451B/461/471 with 0°C ≤ TA ≤ 70 °C. Typical values are tested at V CC = 5V, and T A = 25°C. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter High-level Input Voltage (VIH) Low-level Input Voltage (VIL) Input Clamp Voltage (VIK) High-level Output Current (IOH) Test Conditions Low-level Output Voltage (VOL) Input Current at Max VIN (IIN) High-level Input Current (IIH ) Low-level Input Current (IIL) Supply Current, Outputs High Supply Current, Outputs Low VCC = MIN, IIN = -12mA VCC = MIN, VIH = 2V, VOH = 30V SGX5451B VOH = 35V SGX5461 VOH = 70V SGX5471 VCC = MIN, VIL = 0.8V, IOL = 100mA VCC = MIN, VIL = 0.8V, IOL = 300mA VCC = MAX, VIN = 5.5V VCC = MAX, VIN = 2.4V VCC = MAX, VIN = 0.4V VCC = MAX, VIN = 5V VCC = MAX, VIN = 0V SGX5451B SGX5461 SGX5471 SG55451B SG75451B SG55461 SG75461 Units SG55471 SG75471 Min. Typ. Max. Min. Typ. Max. V 2 2 V 0.8 0.8 -1.2 -1.5 V -1.2 -1.5 300 100 µA 0.25 0.5 0.5 0.8 1.0 60 -1.0 -1.6 8 11 52 56 56 65 76 76 0.25 0.5 -1.0 8 52 56 56 0.4 0.7 1.0 60 -1.6 11 65 76 76 V V mA µA mA mA mA mA mA 5/92 Rev 1.1 2/94 Copyright © 1994 2 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. SG55451B/61/71 SERIES SWITCHING CHARACTERISTICS Parameter Propagation Delay Time, Lowto-High Level Output Propagation Delay Time, Highto-Low Level Output Transition Time, Low-to-High Output Transition Time, High-to-Low Level Output High-Level Output Voltage After Switching (Note 1) (VCC = 5V, TA = 25° C) Test Conditions SG55451B SG55461 SG55471 SG75451B SG75461 SG75471 Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 25 30 110 30 110 ns 18 18 25 8 12 25 8 10 80 25 25 25 8 10 80 25 25 ns ns ns IC = 200mA, CL = 15pF, RL ≈ 50Ω 5 7 IC = 300mA, VS = 20V SGX5451B VS = 30V SGX5461 VS = 55V SGX5471 VS-6.5 VS-10 VS-18 mV mV mV Note 1. These parameters, although guaranteed, are not tested in production. CONNECTION DIAGRAMS & ORDERING INFORMATION Package 8-PIN CERAMIC DIP Y - PACKAGE (See Notes Below) Part No. Ambient Temperature Range -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C 0°C to 70° C 0°C to 70° C 0°C to 70° C -55°C -55°C -55°C -55°C -55°C -55°C to to to to to to 125°C 125°C 125°C 125°C 125°C 125°C Connection Diagram SG55451BY/883B SG55451BY SG55461Y/883B SG55461Y SG55471Y/883B SG55471Y SG75451BY SG75461Y SG75471Y SG55451BL/883B SG55451BL SG55461L/883B SG55461L SG55471L/883B SG55471L 1A 1B 1Y GND 1 2 3 4 8 7 6 5 VCC 2B 2A 2Y 20-PIN CERAMIC LEADLESS CHIP CARRIER L- PACKAGE 1. N.C. 2. 1A 3. N.C. 4. N.C. 5. 1B 6. N.C. 7. 1Y 8. N.C. 9. N.C. 10. GND 3 2 1 20 19 4 5 6 7 8 18 17 16 15 14 9 10 11 12 13 11. N.C. 12. 2Y 13. N.C. 14. N.C. 15. 2A 16. N.C. 17. 2B 18. N.C. 19. N.C. 20. VCC Note 1. Contact factory for JAN and DESC product availability. 2. All parts are viewed from the top. 3. Product is also available in flat pack. Consult factory for price and delivery. 5/92 Rev 1.1 2/94 Copyright © 1994 3 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc.