UM7100

UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES DESCRIPTION The UM7000 and UM7100 series offer moderately high power handling in combination with reasonably low levels of both series resistance and capacitance. The UM7200 series offers the lowest series resistance, but the highest capacitance of the group. The differences in specified performance, for each of the series, results from different I-region thickness. The three series have broad applicability in many RF and microwave switch and attenuator circuits. Additionally, the UM7100 in leaded versions is usually the most cost-effective diode choice in high volume usage. KEY FEATURES W WW . Microsemi . C OM Voltage ratings to 1000V (UM7000) Average power dissipation to 10 W Series resistance as low as 0.25 Ω Carrier lifetime greater than 2.5 µs Non cavity design Thermally matched configuration IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com Low capacitance at 0 V bias Low conductance at 0 V bias ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Package A B&E C D SM All Condition O 25 C Pin Temperature PD 10 W 5.5 W 1.5 W 10 W 7.5 W 8W UM7000 UM7100 UM7200 θ 15 OC/W 27.5 OC/W 15 OC/W 20 OC/W 17 OC/W 60 kW 35 kW 20 kW Compatible with automatic insertion equipment ½ in. total length to 25 OC Contact Free Air O 25 C Stud Temperature O 25 C Stud Temperature O 25 C End Cap Temperature APPLICATIONS/BENEFITS Isolated stud package available Surface mount package available 1 us pulse (Single) VOLTAGE RATINGS Reverse Voltage @ 10 uA 100 200 400 600 800 1000 UM7001 UM7002 UM7006 UM7010 UM7101 UM7102 UM7104 UM7108 UM7201 UM7202 UM7204 - UM7000 SERIES UM7000 SERIES Style “B” Style “SM” Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 1 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) W WW . Microsemi . C OM Parameter Reverse Current (Max) Series Resistance(Max) Capacitance (Max) Parallel Resistance(Min) Carrier Lifetime(Min) I-Region Width (Min) Symbol IR RS CT RP Conditions At rated voltage If = 100 mA, F= 100 MHz VR = 100 V, F = 1 MHZ VR = 100 V, F = 100 MHz IF = 10 mA - UM7000 10 1.0 0.9 200k 2.5 150 UM7100 10 0.6 1.2 150k 2.0 80 UM7200 10 0.25 2.2 70k 1.5 40 Units uA Ohm pF Ohms us um τ W UM7000 TYPICAL 3 CAPACITANCE (pF) 2 1 MHz 5 MHz 1 10 MHz => 100 MHz ELECTRICALS ELECTRICALS 0 100 101 102 103 Vr (V) Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 2 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES UM7100 TYPICAL 3 1 MHz W WW . Microsemi . C OM CAPACITANCE (pF) 5 MHz 2 10 MHz 1 =>100 MHz 0 100 101 102 103 Vr (V) UM7200 TYPICAL 3 1 MHz 10 MHz 100 MHz 2 =>100 MHz CAPACITANCE (pF) 1 ELECTRICALS ELECTRICALS 0 100 101 102 103 Vr (V) Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 3 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES UM7000 TYPICAL 103 100 MHz W WW . Microsemi . C OM 102 Rp (kOhms) 0.5 GHz 1.0 GHz 101 3.0 GHz 100 100 101 102 103 Vr (V) UM7100 TYPICAL 3 10 100 MHz 102 0.5 GHz Rp (kOhms) 1.0 GHz ELECTRICALS ELECTRICALS 101 3.0 GHz 100 100 101 102 103 Vr (V) Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 4 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES UM7200 TYPICAL 102 100 MHz 0.5 GHz W WW . Microsemi . C OM 101 1.0 GHz Rp (kOhms) 100 3.0 GHz 10-1 100 101 102 103 Vr (V) Rs versus If TYPICAL 105 104 UM7000 10 3 Rs (Ohms) UM7100 10 2 UM7200 10 1 ELECTRICALS ELECTRICALS 10 0 10 -1 10-3 10-2 10-1 100 101 102 103 If (mA) Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 5 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES If versus Vf TYPICAL 10 0 UM7200 UM7100 UM7000 W WW . Microsemi . C OM 10-1 If (mA) 10 -2 10-3 10-4 10-5 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Vf (V) POWER RATING STUD MOUNTED DIODES TYPICAL 12 MAX POWER DISSIPATION (W) 10 "C" PACKAGE 8 6 ELECTRICALS ELECTRICALS "D" PACKAGE 4 2 0 0 25 50 75 100 125 150 175 STUD TEMPERATURE (C) Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 6 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES W WW . Microsemi . C OM PULSE THERMAL IMPEDANCE VERSUS WIDTH TYPICAL PULSE THERMAL IMPEDANCE (C/W) 102 THETA = 15 C/W MAX. 101 100 UM7200 ---------UM7100 ELECTRICALS ELECTRICALS UM7000 10-1 10-2 10-6 10-5 10-4 10-3 10-2 10-1 100 PULSE WIDTH (SEC) Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 7 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES W WW . Microsemi . C OM STYLE “A” STYLE “B” STYLE “C” STYLE “CR” MECHANICAL MECHANICAL MECHANICAL Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 8 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES W WW . Microsemi . C OM STYLE “D” STYLE “DR” STYLE “E” STYLE “SM” MECHANICAL MECHANICAL Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 9 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES W WW . Microsemi . C OM UM7000/UM7100/UM7200 STYLE “SM” FOOTPRINT NOTES: 1. These dimensions will match the terminals and provide for additional solder fillets at the outboard ends at least as wide as the terminals themselves, assuming accuracy of placement within 0.005” 2. If the mounting method chosen requires use of an adhesive separate from the solder compound, a round (or square) spot of cement as shown should be centrally located. MECHANICAL MECHANICAL Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 10 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES NOTES: W WW . Microsemi . C OM NOTES NOTES Copyright  2005 Rev. 0, 2005-09-08 Microsemi Page 11