399-43-149-10-003000

INTERCONNECTS SERIES 301, 310, 350, 399 • .100” GRID (.018” DIA.) PINS, STRAIGHT AND RIGHT ANGLE • SINGLE ROW STRIPS • Series 3XX are available with straight and right Number of Pins X .100 angle solder tails .100 • Series 350 & 399...009 use MM #3404 and #5011 pins. See pages 212 & 214 for details .100 Number of Pins X .100" .100 .018 DIA. • Series 301, 310 & 399...003 use MM #0156, #1001 & #1103 receptacles. See pages 165 and 166 for details .142 .110 • Receptacles use Hi-Rel, 4-finger #30 BeCu .142 .018 DIA. contact rated at 3 amps. See page 253 for details .110 FIG. 1 .157 • Insulators are high temperature thermoplastic, .100 suitable for all soldering operations ORDERING INFORMATION Number of Pins X .100" .110 Series 350...006 .100 .050 FIG. 1 Specify number of pins .126 .024 DIA. .018 DIA. .177 Series 399...009 .100 FIG. 2 FIG. 2 .110 2011/65/EU .146 .165 .020 DIA. SPECIFY PLATING CODE XX= .125 Pin Plating FIG. 3 .015-.025 .010 * .018 .093 .110 .100 FIG. 3 .146 .163 FIG. 4 .127 PAGE 46 | INTERCONNECTS For Electrical, Mechanical & Enviromental Data, See page 264 90 40 200 µ” Sn/Pb FIG. 4 Series 399...003 .100 FIG. 5 .144 01-64 Socket with Retention Pins 301-43-1_ _-41-560000 03-64 Right Angle Socket 399-XX-1_ _-10-003000 Specify number of pins Number of Pins 02-64 X .100" .094 .100 .050 .018 DIA. 2011/65/EU .126 SPECIFY PLATING CODE XX= 11 .220 For Electrical, Mechanical & Enviromental Data, See page 264 XX=Plating Code See Below RoHS - 2 200 µ” Sn Solder Tail Socket 310-XX-1_ _-41-001000 Specify number of pins .043 .045 DIA. .110 02-64 Specify number of pins Series 301...056 .290 .020 DIA. 10 10 µ” Au Series 310...001 Number of Pins X .100" .100 Right Angle Pin Header 399-XX-1_ _-10-009000 XX=Plating Code See Below RoHS - 2 .095 01-64 Specify number of pins Number of Pins X .100" .015-.025 .010 * .018 Straight Pin Header 350-XX-1_ _-00-006000 .100 FIG. 5 13 91 93 99 41 43 44 47 Sleeve (Pin) 10 µ” Au 10 µ” Au 200 µ”Sn/Pb 200 µ”Sn/Pb 200 µ”Sn/Pb 200 µ” Sn 200 µ” Sn 200 µ” Sn 200 µ” Sn Contact (Clip) 10 µ” Au 30 µ” Au 10 µ” Au O 41, 91 & 99 Platings Non-Standard 30 µ” Au 100 µ”Sn/Pb 10 µ” Au 30 µ” Au 100 µ” Sn Au Flash Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com