CMM9000-QT

1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Features 15 dB Gain 15 dBm P1dB 3x3 QFN Package Single Positive Supply 4-8 V, 70 mA Self Bias DC Blocking Capacitors and RF Choke Inductors Integrated On-Chip RoHS Compliant Circuit Description Mimix Broadband’s 2 stage feedback 1.5 to 6.0 GHz driver amplifier is packaged in an RoHS compliant surface mount 3x3 QFN package. The device is a self-biased, single supply design with 15 dB gain and 15 dBm P1dB between 1 and 6 GHz. This MMIC uses Mimix Broadband’s MESFET process. The device is fully matched, so there is no need for external matching components. Output DC blocking capacitor and RF choke inductors are integrated on-chip. Care must be taken to isolate the input from external DC voltages. Absolute Maximum Ratings Supply Voltage RF Input Power Storage Temperature (Tstg) Junction Temperature Operating Temperature Jc +8 V +15 dBm -55 ºC to +125 ºC 175 ºC -40 ºC to +85ºC 85 ºC/W Electrical Characteristics (T=25ºC,Vdd=6V) Parameter Frequency Range (f ) Gain (S21) Input Return Loss (S11) Output Return Loss (S22) Output P1dB Output IP3 Current Units GHz dB dB dB dBm dBm mA Min. 1.5 9.5 11 20 - Operating this device beyond any of these parameters may cause permanent damage. Typ. 15 -10 -10 15 25 90 Max. 6 120 Min. 6.1 - Typ. 9 -6 -6 14 25 90 Max. 10 120 Typical Parameters (6V, 90 mA) Parameter (Unit) Frequency (GHz) Gain (dB) IP Return Loss (dB) Op Return Loss (dB) P1dB (dBm) OIP3 (dBm) Noise Figure (dB) 1 13 -10 -10 17 26 5.5 2 15 -18 -20 16 25 5.5 Typical 4 6 15 11 -18 -12 -15 -12 15 16 25 25 5.5 5.5 8 9 -6 -9 15 25 5.5 10 9 -8 -20 15 26 6 Page 1 of 11 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Driver Amplifier Measurements 0 CMM9000-QT Input Return Loss (S11) Over Voltage Output Return Loss (dB) 0 CMM9000-QT Output Return Loss (S22) Over Voltage Input Return Loss (dB) -5 -5 -10 S11_4V S11_5V S11_6V S11_7V -10 S22_4V S22_5V S22_6V S22_7V -15 -15 -20 -20 -25 0 2 4 6 8 10 12 14 16 18 20 -25 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 16 14 12 CMM9000-QT Gain (S21) Over Voltage 0 -10 -20 -30 -40 -50 -60 CMM9000-QT Isolation (S12) Over Voltage Gain (dB) 10 8 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 S21_4V S21_5V S21_6V S21_7V Isolation (dB) S12_4V S12_5V S12_6V S12_7V 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Driver Amplifier Measurements (cont.) CMM9000-QT Stability Factor (K) Over Voltage 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 CMM9000-QT Noise Figure (NF) Over Voltage 7 6 5 NF (dB) K_4V K_5V K_6V K_7V 4 3 2 1 0 1 2 3 4 5 6 7 NF_4V NF_5V NF_6V NF_7V K Frequency (GHz) Frequency (GHz) CMM9000-QT Output P1dB Over Voltage 20 18 16 14 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 1 2 3 CMM9000-QT Output IP3 Over Voltage P1dB (dBm) 12 10 8 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 OIP3 (dBm) P1dB_5V P1dB_6V P1dB_7V OIP3_5V OIP3_6V OIP3_7V 4 5 6 7 8 9 10 Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Driver Amplifier Measurements (cont.) 0 CMM9000-QT Input Return Loss (S11) Over Temperature, 4V Output Return Loss (dB) 0 CMM9000-QT Output Return Loss (S22) Over Temperature, 4V Input Return Loss (dB) -5 -5 -10 S11_4V_25°C S11_4V_-35°C S11_4V_80°C -10 S22_4V_25°C S22_4V_-35°C S22_4V_80°C -15 -15 -20 -20 -25 0 2 4 6 8 10 12 14 16 18 20 -25 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 0 2 4 CMM9000-QT Gain (S21) Over Temperature, 4V 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 CMM9000-QT Isolation (S12) Over Temperature, 4V S21_4V_25°C S21_4V_-35°C S21_4V_80°C Isolation (dB) Gain (dB) S12_4V_25°C S12_4V_-35°C S12_4V_80°C 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 2 CMM9000-QT Stability Factor (K) Over Temperature, 4V 7 6 CMM9000-QT Noise Figure (NF) Over Temperature, 4V K_4V_25°C K_4V_-35°C K_4V_80°C Noise Figure (dB) 5 4 3 2 1 0 NF_4V_25°C NF_4V_-35°C NF_4V_80°C K 4 6 8 10 12 14 16 18 20 1 2 3 4 5 6 7 Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Driver Amplifier Measurements (cont.) 0 CMM9000-QT Input Return Loss (S11) Over Temperature, 5V Output Return Loss (dB) 0 CMM9000-QT Output Return Loss (S22) Over Temperature, 5V Input Return Loss (dB) -5 -5 -10 S11_5V_25°C S11_5V_-35°C S11_5V_80°C -10 S22_5V_25°C S22_5V_-35°C S22_5V_80°C -15 -15 -20 -20 -25 0 2 4 6 8 10 12 14 16 18 20 -25 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 0 2 4 CMM9000-QT Gain (S21) Over Temperature, 5V 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 CMM9000-QT Isolation (S12) Over Temperature, 5V S21_5V_25°C S21_5V_-35°C S21_5V_80°C Isolation (dB) Gain (dB) S12_5V_25°C S12_5V_-35°C S12_5V_80°C 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 2 CMM9000-QT Stability Factor (K) Over Temperature, 5V 7 6 CMM9000-QT Noise Figure (NF) Over Temperature, 5V K_5V_25°C K_5V_-35°C K_5V_80°C Noise Figure (dB) 5 4 3 2 1 0 NF_5V_25°C NF_5V_-35°C NF_5V_80°C K 4 6 8 10 12 14 16 18 20 1 2 3 4 5 6 7 Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Driver Amplifier Measurements (cont.) 0 CMM9000-QT Input Return Loss (S11) Over Temperature, 6V Output Return Loss (dB) 0 CMM9000-QT Output Return Loss (S22) Over Temperature, 6V Input Return Loss (dB) -5 -5 -10 S11_6V_25°C S11_6V_-35°C S11_6V_80°C -10 S22_6V_25°C S22_6V_-35°C S22_6V_80°C -15 -15 -20 -20 -25 0 2 4 6 8 10 12 14 16 18 20 -25 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 0 2 4 CMM9000-QT Gain (S21) Over Temperature, 6V 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 CMM9000-QT Isolation (S12) Over Temperature, 6V S21_=6V_25°C S21_6V_-35°C S21_6V_80°C Isolation (dB) Gain (dB) S12_6V_25°C S12_6V_-35°C S12_6V_80°C 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 2 CMM9000-QT Stability Factor (K) Over Temperature, 6V 7 6 CMM9000-QT Noise Figure (NF) Over Temperature, 6V K_6V_25°C K_6V_-35°C K_6V_80°C Noise Figure (dB) 5 4 3 2 1 0 NF_6V_25°C NF_6V_-35°C NF_6V_80°C K 4 6 8 10 12 14 16 18 20 1 2 3 4 5 6 7 Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Driver Amplifier Measurements (cont.) 0 CMM9000-QT Input Return Loss (S11) Over Temperature, 7V Output Return Loss (dB) 0 CMM9000-QT Output Return Loss (S22) Over Temperature, 7V Input Return Loss (dB) -5 -5 -10 S11_7V_25°C S11_7V_-35°C S11_7V_80°C -10 S22_7V_25°C S22_7V_-35°C S22_7V_80°C -15 -15 -20 -20 -25 0 2 4 6 8 10 12 14 16 18 20 -25 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 0 2 4 CMM9000-QT Gain (S21) Over Temperature, 7V 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 CMM9000-QT Isolation (S12) Over Temperature, 7V S21_7V_25°C S21_7V_-35°C S21_7V_80°C Isolation (dB) Gain (dB) S12_7V_25°C S12_7V_-35°C S12_7V_80°C 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 2 CMM9000-QT Stability Factor (K) Over Temperature, 7V 7 6 CMM9000-QT Noise Figure (NF) Over Temperature, 7V Noise Figure (dB) 5 4 3 2 1 0 NF_7V_25°C NF_7V_-35°C NF_7V_80°C K_7V_25°C K_7V_-35°C K_7V_80°C K 4 6 8 10 12 14 16 18 20 1 2 3 4 5 6 7 Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Driver Amplifier Measurements (cont.) CMM9000-QT Output P1dB Over Temperature, 6V 20 18 16 14 30 28 26 24 CMM9000-QT Output OIP3 Over Temperature, 6V P1dB (dBm) 12 10 8 6 4 2 0 0 2 4 6 8 10 OIP3 (dBm) P1dB_6V_25°C P1dB_6V_-35°C P1dB_6V_80°C 22 20 18 16 14 12 10 0 2 4 6 8 10 OIP3_6V_25°C OIP3_6V_-35°C OIP3_6V_80°C Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 8 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Evaluation Board Layout Package Pin-out Table Pin Designator 1,2,4,5,6,7,8,9, 11,12,14,15,16 3 10 13 Description NC RF Input RF Output Vd C1 = 1000pF C2 = 1µF We recommend to ground all non-connected pins and to have as many via holes as possible under the ground paddle. Evaluation Board Schematic The input requires DC blocking capacitor if DC voltage is present on the input RF line. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 9 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Package Outline and Assembly Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 10 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.5-6.0 GHz GaAs MMIC Packaged Driver Amplifier March 2010 - Rev 13-Mar-10 CMM9000-QT Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: • Do not ingest. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these byproducts are dangerous to the human body if inhaled, ingested, or swallowed. • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Typical Reflow Profiles Reflow Profile Ramp Up Rate Activation Time and Temperature Time Above Melting Point Max Peak Temperature Time Within 5 ºC of Peak Ramp Down Rate SnPb 3-4 ºC/sec 60-120 sec @ 140-160 ºC 60-150 sec 240 ºC 10-20 sec 4-6 ºC/sec Pb Free 3-4 ºC/sec 60-180 sec @ 170-200 ºC 60-150 sec 265 ºC 10-20 sec 4-6 ºC/sec Factory Automation and Identification Mimix Designator -QT Package Type QFN (3x3mm) Number of leads offered 16 W Tape Width 12mm P1 Component Pitch 8mm P0 Hole Pitch 4mm Reel Diameter 329mm (13in) Units per Reel 2000 Component Orientation: Parts are to be oriented with the PIN 1 closest to the tape's round sprocket holes on the tape’s trailing edge. Note: Tape and Reel packaging is ordered with a -000T suffix. Package is available in 500 unit reels through designated sales channels. Minimum order quantities should be discussed with your local sales representative. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information Part Number for Ordering CMM9000-QT-0G00 CMM9000-QT-0G0T PB-CMM9000-QT-0000 Description Matte Tin plated RoHS compliant 3x3 16L QFN surface mount package in bulk quantity Matte Tin plated RoHS compliant 3x3 16L QFN surface mount package in tape and reel CMM9000-QT evaluation board Appropriate precautions in handling, packaging and testing devices must be observed. C a u t i o n : E S D S e n s i t i ve Proper ESD procedures should be followed when handling this device. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 11 of 11 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.