HFCN-1080+

LTCC High Pass Filter 50Ω HFCN-1080+ 1140 to 4240 MHz The Big Deal • Small size 3.2mm x 1.6mm • Pass band (1140-4240 MHz) • Low Insertion Loss (2.0 dB typical) • Sharp rejection peaks close to stop band CASE STYLE: FV1206 Product Overview The HFCN-1080+ LTCC High Pass Filter is constructed with 12 layers in order to achieve a miniature size and high repeatability of performance. Wrap-around terminations minimize variations in performance due to parasitics. Covering 1140-4240 MHz, these units offer low insertion loss and good rejection. Key Features Feature Advantages Small Size (3.20mm x1.6 mm) Allows for high layout density of circuit boards, while minimizing affects of parasitics. Rejection peaks at harmonic frequencies Provides good rejection of signals at harmonic frequencies, for improved system performance. Wrap around termination Provides excellent solderability and easy visual inspection capability. LTCC construction Provides a rugged package that is well suited for tough environments including high humidity and high temperature extremes. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 2 Ceramic High Pass Filter 50Ω HFCN-1080+ 1140 to 4240 MHz CASE STYLE: FV1206 Features Maximum Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input* 7W max. at 25°C * Passband rating, derate linearly to 3W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. • low cost • small size • 7 sections • temperature stable • excellent power handling, 7W • hermetically sealed +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Pin Connections RF IN 1 RF OUT 3 Reel Size 7” • sub-harmonic rejection • transmitters/receivers • lab use Electrical Specifications(1,2) at 25°C GROUND 2,4 Parameter Outline Drawing (ON TOP) and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 3000 Rejection Loss Stop Band Pass Band (ON TOP) Freq. Cut-Off VSWR Insertion Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit DC-F1 F1-F2 DC-600 DC-700 40 20 — — — — dB dB F3 1080 — 3.0 — dB DC-F2 F4-F7 F5-F6 DC-780 1140-4240 1250-3730 — — — 20 — — — 2.0 1.4 :1 dB dB F4-F7 1140-4240 — 2.0 — :1 (1) In Application where DC voltage is present at either input or output ports, coupling capacitors are required. (2) Measured on Mini-Circuits Characterization Test Board TB-270. ATTENUATION (dB) Typical Frequency Response PCB Land Pattern Electrical Schematic R F IN 40 R F OUT 20 3 2 1.3 DC F1 F2 F3 F4 F5 F6 F7 FREQUENCY Typical Performance Data at 25°C Suggested Layout, Tolerance to be within ±.002 A .126 3.20 H .087 2.21 Frequency (MHz) Outline Dimensions ( inch mm ) B .063 1.60 C .037 0.94 D .020 0.51 E .032 0.81 F .009 0.23 G .169 4.29 J .024 0.61 K .122 3.10 L .024 0.61 M .087 2.21 N .012 0.30 P wt .071 grams 1.80 .020 Demo Board MCL P/N: TB-270 Suggested PCB Layout (PL-137) Insertion Loss (dB) 10.0 600.0 700.0 780.0 1080.0 1140.0 1190.0 3010.0 4240.0 4600.0 94.10 49.17 37.65 29.42 3.02 0.00 66.82 48.26 36.20 2.68 1.49 1.08 0.35 1.18 1.64 1.46 1.13 1.05 2.33 2.88 HFCN-1080+ INSERTION LOSS 100 HFCN-1080+ VSWR 1000 80 100 60 VSWR INSERTION LOSS (dB) VSWR (:1) 40 10 20 0 0 1000 2000 3000 4000 5000 FREQUENCY (MHz) 1 0 1000 2000 3000 4000 5000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151107 HFCN-1080+ ED-14070/1 AD/CP/AM 150729 Page 2 of 2