62300-3000

FEATURES AND SPECIFICATIONS The Molex Hawk termination machine is designed for use with two different Molex product lines with only a minor tooling change. This machine will assemble 2.54mm (.100”) Pitch SL™ Flat Flexible Cable connectors to Flat Flexible Cable, Flexible Printed Circuitry and membrane switch tails, along with 2.54mm (.100”) Pitch SL IDT ribbon cable assemblies with a production rate of up to 750 per hour, depending on the operator’s skill. This machine has the ability to produce 950 assemblies per hour with the addition of a magazine tube loader, (contact Molex for more information on this option). The Hawk will handle 2 to 25 circuits, (circuit size of 2 must be and circuit size of 3 should be processed in chains of 2 or more to avoid feed jams), and has the option of a carrier breakoff for both product lines. This machine is designed for mid-volume, semi-automatic applications with cable lengths greater than 1”. Features and Benefits n Can be used with flat flexible cable or pre-notched ribbon cable. This allows for production flexibility and lowers overall cost. n Automatic loading of connectors from tube packaging, which will reduce operator handling and increase production output. n Operator interface keypad for data entry, such as setting batch size or displaying an operator fault message, to help ensure proper operation. n Automatic carrier strip breakoff available, which can be factory ordered or field installed and will reduce operator’s handling of product. n Meets OSHA safety requirements and is totally enclosed for operator safety. n Available in 220 volts and has been CE certified for use in Europe Electrical Voltage: 110/220 VAC, 50/60 Hz, 1.0A Foot switch activated Mechanical Dimensions: Height—494.00mm (19.50”) (without feet) Width—945.00mm (37.25”) Depth—914.00mm (36.00”) Weight: Unpacked—48.10 kg (103 lbs.) Pneumatics: Pressure—5 BAR (80 psig) min. Consumption—14L/min. (.5 SCFM) Processing Capability: 750 connectors per hour, depending on operator’s skill. Up to 950 connectors per hour with special order magazine tube loader. Consult factory for more information. Flat Flexible Cable and IDT Ribbon Cable Hawk Machine 70430 Ribbon Cable 70431 70400 70475 ORDERING INFORMATION Order No. 62300-2900 62300-3000 62300-5200 62300-5300 62300-5100 62300-5000 Description FFC Terminator Ribbon Cable Terminator FFC Terminator with Breakoff Ribbon Cable Terminator with Breakoff FFC Tooling Required for Changeover from Ribbon Cable Ribbon Cable Tooling Required for Changeover from FFC For Use With 70430, 70431, 40556 70400, 70475 70430, 70431, 40556 70400, 70475 70430, 70431, 40556 70400, 70475 Voltage/Hz 110/220V AC 50/60 Hz 110/220V AC 50/60 Hz 110/220V AC 50/60 Hz 110/220V AC 50/60 Hz 110/220V AC 50/60 Hz 110/220V AC 50/60 Hz Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Order No. DHL-0001 Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.com Far East South Headquarters Jurong, Singapore 65-6-268-6868 fesinfo@molex.com Visit our website at www.molex.com Printed in USA/100/JI/JI/2006.05 European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 ©2006, Molex