0430450469

TEST SUMMARY Micro-Fit (3.0) Dual Row Connector System (Wire to Wire & Wire to Board) 1.0 SCOPE This Test Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector series terminated with 20-30 AWG wire using crimp technology. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND PART NUMBER(S) Micro-Fit (3.0) Receptacle : 43025 Micro-Fit (3.0) Female Crimp Terminal : 43030 Micro-Fit (3.0) Plug : 43020 Micro-Fit (3.0) Male Crimp Terminal : 43031 Micro-Fit (3.0) Right Angle & Vertical Headers : 43045 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS See the appropriate sales drawings for information on dimensions, materials, plating, and markings. 2.3 PRODUCT SPECIFICATION TITLE AND DOCUMENT NUMBER Product Specification ; Micro-Fit (3.0) Document Number : PS-43045 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS 3.1 TESTING PROCEDURES AND SEQUENCES EIA-364-1000.01 3.2 OTHER DOCUMENTS AND SPECIFICATIONS none 4.0 QUALIFICATION Laboratory conditions and sample selection are in accordance with EIA-364. REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 1 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY 5.0 PERFORMANCE RESULTS 5.1 ELECTRICAL PERFORMANCE RESULTS WIRE TO WIRE CONFIGURATION ITEM DESCRIPTION 1A CONTACT RESISTANCE (LOW LEVEL) TREATMENT REQUIREMENT MEAN MINIMUM MAXIMUM Initial ** 10 milliohms MAXIMUM 19.95 mΩ 19.74 mΩ 20.40 mΩ After Durability ∆ mΩ 20 milliohms MAXIMUM -0.23 mΩ -0.03 mΩ 0.67 mΩ After Temperture Life ∆ mΩ 20 milliohms MAXIMUM 0.38 mΩ 0.08 mΩ 1.01 mΩ After Reseating ∆ mΩ 20 milliohms MAXIMUM 0.25 mΩ -0.53 mΩ 1.32 mΩ NOTE : ** APPROXIMATELY 16.6 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE OF THE 13 INCHES OF WIRE USED IN SAMPLE PREPARATION. WIRE TO BOARD CONFIGURATION ITEM DESCRIPTION 1B CONTACT RESISTANCE (LOW LEVEL) TREATMENT REQUIREMENT MEAN MINIMUM MAXIMUM Initial 10 milliohms MAXIMUM 4.75 mΩ 4.55 mΩ 4.98 mΩ After Durability ∆ mΩ 20 milliohms MAXIMUM -0.23 mΩ -0.03 mΩ 0.67 mΩ After Temperture Life ∆ mΩ 20 milliohms MAXIMUM 0.38 mΩ 0.08 mΩ 1.01 mΩ After Reseating ∆ mΩ 20 milliohms MAXIMUM 0.25 mΩ -0.53 mΩ 1.32 mΩ NOTE : SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 2 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY 5.1 ELECTRICAL PERFORMANCE RESULTS (continued) WIRE TO WIRE CONFIGURATION ITEM DESCRIPTION 2A Contact Resistance (Low Level) TREATMENT REQUIREMENT Initial ** After Durability ∆ mΩ 10 milliohms MAXIMUM 20.01 mΩ 19.59 mΩ 23.29 mΩ 20 milliohms MAXIMUM 0.19 mΩ -0.02 mΩ 0.64 mΩ After Thermal Shock ∆ mΩ 20 milliohms MAXIMUM 0.34 mΩ 0.08 mΩ 0.74 mΩ After Cyclic Humidity ∆ mΩ 20 milliohms MAXIMUM 0.62 mΩ 0.14 mΩ 1.77 mΩ 20 milliohms MAXIMUM 0.61 mΩ 0.11 mΩ 3.09 mΩ After Reseating ∆ mΩ MEAN MINIMUM MAXIMUM NOTE : ** APPROXIMATELY 16.6 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE OF THE 13 INCHES OF WIRE USED IN SAMPLE PREPARATION. WIRE TO BOARD CONFIGURATION ITEM DESCRIPTION 2B Contact Resistance (Low Level) TREATMENT REQUIREMENT MEAN Initial 10 milliohms MAXIMUM 4.75 mΩ 4.55 mΩ 4.98 mΩ After Durability ∆ mΩ 20 milliohms MAXIMUM 0.42 mΩ -0.02 mΩ 2.03 mΩ After Thermal Shock ∆ mΩ 20 milliohms MAXIMUM 1.56 mΩ 0.25 mΩ 5.71 mΩ After Cyclic Humidity ∆ mΩ 20 milliohms MAXIMUM 1.28 mΩ 0.15 mΩ 4.60 mΩ 20 milliohms MAXIMUM 2.19 mΩ 0.23 mΩ 8.04 mΩ After Reseating ∆ mΩ MINIMUM MAXIMUM NOTE : SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 3 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY 5.1 ELECTRICAL PERFORMANCE RESULTS (continued) WIRE TO BOARD CONFIGURATION – 2 CIRCUIT VERSION ITEM DESCRIPTION 3A Contact Resistance (Low Level) TREATMENT REQUIREMENT Initial ** After Durability ∆ mΩ 10 milliohms MAXIMUM 10.26 mΩ 10.17 mΩ 10.46 mΩ 20 milliohms MAXIMUM 0.75 mΩ 0.16 mΩ 1.57 mΩ 20 milliohms MAXIMUM 1.88 mΩ 0.58 mΩ 3.77 mΩ 20 milliohms MAXIMUM 1.28 mΩ 0.15 mΩ 4.60 mΩ After Temperature Life Pre-Conditioned ∆ mΩ After Vibration ∆ mΩ No Discontinuity MEAN MINIMUM MAXIMUM Discontinuity < 1 microsecond NOTE : ** APPROXIMATELY 7.8 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE OF THE 6 INCHES OF WIRE USED IN SAMPLE PREPARATION. WIRE TO BOARD CONFIGURATION –12 CIRCUIT VERSION ITEM DESCRIPTION 3B Contact Resistance (Low Level) TREATMENT REQUIREMENT MEAN Initial ** After Durability ∆ mΩ 10 milliohms MAXIMUM 10.24 mΩ 9.85 mΩ 10.52 mΩ 20 milliohms MAXIMUM 0.41 mΩ 0.14 mΩ 2.13 mΩ 20 milliohms MAXIMUM 0.81 mΩ 0.16 mΩ 3.68 mΩ 20 milliohms MAXIMUM 1.14 mΩ 0.25 mΩ 3.56 mΩ After Temperature Life Pre-Conditioned ∆ mΩ After Vibration ∆ mΩ No Discontinuity MINIMUM MAXIMUM Discontinuity < 1 microsecond NOTES : ** APPROXIMATELY 7.8 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE OF THE 6 INCHES OF WIRE USED IN SAMPLE PREPARATION. SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 4 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY 5.1 ELECTRICAL PERFORMANCE RESULTS (continued) WIRE TO WIRE CONFIGURATION ITEM DESCRIPTION TREATMENT REQUIREMENT Initial ** After Durability ∆ mΩ 10 milliohms MAXIMUM 20.07 mΩ 19.95 mΩ 20.50 mΩ 20 milliohms MAXIMUM 0.31 mΩ -0.02 mΩ 0.72 mΩ 20 milliohms MAXIMUM 0.34 mΩ 0.07 mΩ 0.97 mΩ Thermal Cycling 167 Hours ∆ mΩ 20 milliohms MAXIMUM 0.42 mΩ 0.10 mΩ 2.01 mΩ Thermal Cycling 334 Hours ∆ mΩ 20 milliohms MAXIMUM 0.41 mΩ -0.06 mΩ 1.03 mΩ Thermal Cycling 500 Hours ∆ mΩ 20 milliohms MAXIMUM 0.64 mΩ 0.03 mΩ 2.79 mΩ After Reseating ∆ mΩ 20 milliohms MAXIMUM 0.54 mΩ 0.14 mΩ 2.45 mΩ After Temperature Life Pre-Conditioned ∆ mΩ 4A Contact Resistance (Low Level) MEAN MINIMUM MAXIMUM NOTES : ** APPROXIMATELY 16.6 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE OF THE 13 INCHES OF WIRE USED IN SAMPLE PREPARATION. SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 5 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY 5.1 ELECTRICAL PERFORMANCE RESULTS (continued) WIRE TO BOARD CONFIGURATION ITEM DESCRIPTION TREATMENT REQUIREMENT MEAN Initial 10 milliohms MAXIMUM 4.78 mΩ 4.56 mΩ 5.53 mΩ After Durability ∆ mΩ 20 milliohms MAXIMUM 0.48 mΩ 0.06 mΩ 2.35 mΩ 20 milliohms MAXIMUM 1.07 mΩ 0.13 mΩ 5.80 mΩ Thermal Cycling 167 Hours ∆ mΩ 20 milliohms MAXIMUM 1.38 mΩ 0.30 mΩ 4.68 mΩ Thermal Cycling 334 Hours ∆ mΩ 20 milliohms MAXIMUM 1.63 mΩ 0.31 mΩ 5.17 mΩ Thermal Cycling 500 Hours ∆ mΩ 20 milliohms MAXIMUM 3.04 mΩ 0.69 mΩ 8.51 mΩ After Reseating ∆ mΩ 20 milliohms MAXIMUM 3.48 mΩ 0.41 mΩ 8.94 mΩ After Temperature Life Pre-Conditioned ∆ mΩ 4B Contact Resistance (Low Level) MINIMUM MAXIMUM NOTE : SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION 5.1 ELECTRICAL PERFORMANCE RESULTS (continued) REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 6 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY ITEM DESCRIPTION WIRE GAUGE REQUIREMENT AMPERAGE 30°C Max. Temp. Rise 2.5 Amps 26 AWG 30°C Max. Temp. Rise 3.0 Amps 24 AWG 30°C Max. Temp. Rise 4.0 Amps 20 AWG 30°C Max. Temp. Rise 5.5 Amps 30 AWG Temperature Rise & Current Cycling 5 6.1 MECHANICAL PERFORMANCE RESULTS ITEM Wire Pullout Force (Newtons) 6 REVISION: A1 DESCRIPTION Wire Gauge REQUIREMENT 20 AWG 57.8 N Minimum 22 AWG 117.5 134.7 35.6 N Minimum 86.1 80.2 90.4 24 AWG 22.2 N Minimum 53.6 44.7 58.08 26 AWG 13.3 N Minimum 36.1 33.8 38.3 28 AWG 8.9 N Minimum 21.1 18.1 23.2 30 AWG 6.6 N Minimum 18.2 13.5 24.6 EC No: UCP2014-1894 DATE: 2013 / 10 / 28 TS-43045-001 MINIMUM MAXIMUM 127.4 ECR/ECN INFORMATION: DOCUMENT NUMBER: MEAN TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 7 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY 5.1 MECHANICAL PERFORMANCE RESULTS (continued) ITEM Contact Normal Force (grams) 7 REVISION: A1 DESCRIPTION ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 REQUIREMENT MEAN MINIMUM MAXIMUM 275 g Min 331 g 322 g 343 g TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 8 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY APPENDIX A TEST SEQUENCES REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 9 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY A.1 TEST SEQUENCES SEQUENCE 1 SEQUENCE 2 1A Wire to Wire 1B Wire to Board 2A Wire to Wire 2B Wire to Board Initial Contact Resistance Initial Contact Resistance Durablity (20x) Durablity (20x) Contact Resistance Contact Resistance Temperature Life 105°C. 240 hours Thermal Shock -55/+85°C. 30 min. dwell Contact Resistance Contact Resistance Reseating (3x) Cyclic Humidity +25/+65° 80-50% RH Final Contact Resistance Contact Resistance Reseating (3x) Final Contact Resistance REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 10 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC TEST SUMMARY A.1 TEST SEQUENCES (continued) SEQUENCE 3 SEQUENCE 4 3A Wire to Wire 3B Wire to Board 4A Wire to Wire 4B Wire to Board Initial Contact Resistance Initial Contact Resistance Durability (20x) Durability (20x) Contact Resistance Contact Resistance Temperature Life Pre-Cond. 105°C 120 hours Temperature Life Pre-Cond. 105°C 120 hours Contact Resistance Contact Resistance Random Vibration (with Discontinuity) Thermal Cycling +15/+85°C. 500 hours Final Contact Resistance Contact Resistance Reseating (3x) Final Contact Resistance REVISION: A1 ECR/ECN INFORMATION: EC No: UCP2014-1894 DATE: 2013 / 10 / 28 DOCUMENT NUMBER: TS-43045-001 TITLE: TEST SUMMARY MICRO-FIT (3.0) DUAL ROW CONNECTORS SHEET No. 11 of 11 CREATED / REVISED BY: CHECKED BY: APPROVED BY: GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13 TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC