0622019005

Part Number : 622019005 Product Description : Installation Press-in Tool for Impel Plus 1.90mm Pitch Daughtercard Unguided Assembly and RAM Unguided Assembly (6-Pair by 10 Column) Series Number : 207123 Status : Obsolete Product Category : Application Tooling Accessories Documents & Resources Tooling Specifications Application Tooling Specification 622019005-000.pdf Product Environment Compliance Compliance China RoHS Not Reviewed EU ELV Not Reviewed Low-Halogen Status Not Reviewed REACH SVHC Not Reviewed EU RoHS Not Reviewed Multiple Part Product Compliance Statements - Eu RoHS - REACH SVHC - Low-Halogen Multiple Part Industry Compliance Documents - IPC 1752A Class C - IPC 1752A Class D - Molex Product Compliance Declaration - IEC-62474 - chemSHERPA (xml) EU RoHS Certificate of Compliance Part Details General Status Obsolete Category Application Tooling Accessories Series 207123 Description Installation Press-in Tool for Impel Plus 1.90mm Pitch Daughtercard Unguided Assembly and RAM Unguided Assembly (6-Pair by 10 Column) Function Insertion Geographic Area Global Level of Automation Manual More Detailed Tech Information toolingsupport@molex.com Product Family Application Tooling Product Name Impel Tool Type Press-Fit Insertion Tool UPC 193264142668 Warranty Disclaimer CAUTION: Molex tooling crimp specifications are valid only when used with Molex terminals and tooling manufactured by Molex and sold by Molex or authorized distributors ("Molex Tooling"). When using tooling other than Molex Tooling with Molex specific connector systems listed in our ATS documents, the Molex tooling qualification does not apply and the responsibility for full qualification of the connector system is that of the customer. Molex accepts no liability for connector performance or tooling support where tooling other than Molex Tooling is used or where Molex Tooling is modified. This document was generated on Jan 24, 2024