0622020212

VHDM Tooling 5, 6 and 8 Row Universal Alignment Block For HSD or VHDM® Backplane Connector System Instruction Sheet Order No. 62202-0212 FEATURES Œ Œ Œ Designed to provide proper spacer and clearance on Backplane Connectors with guide pins and polarizing pins. This tool module may be used with an Insertion Tool to press in (1) one connector or is stackable in a Molex tool holder system to press in multiple connectors at one time See 62201-0999 VHDM-HSD Backplane And Daughtercard Installation Tooling Operation Manual for more information on tooling, presses and repair SCOPE: Products: VHDM®* 5, 6 and 8-Row use on all connectors with guide pins. *VHDM® is a registered trademark of Amphenol Corporation DESCRIPTION: This tool is used with an Insertion Tool for pressing in an HSD or VHDM®* 5, 6 and 8-Row connector with locating pins. This block allows insertion tools for connectors with locating pins to be stacked in mounting rails with other VHDM or HSD insertion tools. They are mounted in one of several different lengthmounting rails. See Sections 2.3 and 4.2 in 62201-0999 VHDM-HSD Installation Tooling Manual for detailed information on selecting the rails and mounting these special combinations This tool is intended for use with a customer supplied back up and in a press of sufficient tonnage to allow full seating of the connector. There are no replacement parts available for this tool. Should any part of the tool be damaged the whole tool must be replaced. OPERATION: Refer to 62201-0999 VHDM-HSD Manual for proper operation, maintenance, and options of this tool for proper operation, maintenance, and options of this tool. Far East North Headquarters Far East South Headquarters European Headquarters Corporate Headqua -JTMF
*MMJOPJT

64"
:BNBUP
,BOBHBXB
+BQBO
+VSPOH
4JOHBQPSF
.VOJDI
(FSNBOZ

8FMMJOHUPO
$U
.0-&9



-JTMF
*-

64"
BNFSJOGP!NPMFYDPN
GFOJOGP!NPMFYDPN
GFTJOGP!NPMFYDPN
FVSJOGP!NPMFYDPN

mericas Headquarters 'BY
 Visit our Web site at http://www.molex.com Doc No. ATS-622020212 Page 1 of 1 COPY Revision: C Revision Date: 12-15-06 Release Date: 08-10-99 UNCONTROLLED